ReviewsCnc 3 d Drilling Machine

Utoolmart Forstner Drill Bits, 22mm Cemented Carbide Wood Cutter Tool, Round Shank Woodworking Hole Saw Cutter, 125mm Length Woodworking Hole Boring Bit, Blue, 1 Pcs

【Specifications】- Drilling diameter: 22mm / 0.87-inch.
Shank diameter: 8mm / 0.31-inch. Hex shank, cemented carbide cutter and high-quality carbon structural steel (45# steel) body..
【Features】- Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation..
【Applications】- Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose..
【Application Range】- Suitable for bench drill, vertical drilling machine, hand held electric drill, impact drill, CNC carving machine and other drill press..
【Warm Tips】- Can not be used for cutting metal holes. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits..

Check Stock

INPANOLS MT3 ER32 Collet Chuck, Precision Milling Shank Holder, Drawbar Thread 1/2\-12

MT3(Morse Taper 3) Shank for ER32 Collets.
★HIGH CENTERING ACCURACY: Max T.I.R. 0.0004" O.D to I.D..
★HIGH HARDNESS: Made of high-quality alloy spring steel and hardened to HRC 58 and all critical surface is precision ground..
Specially designed for milling, drilling, CNC, tapping, lathe, and other clamping tools..
NOTE: This is an ultra-precision work holding tool. When doing the inspection to ensure that each part is wiped especially clean, and the installation must be in place, otherwise it has a great impact on the accuracy..

Check Stock

Micro Drill Bits -10Pcs Tungsten Carbide Macro Drill Bits Set, PCB Drill Bit Set, Mini Drill Bit 1/8\ Shank for Print Circuit Board, Amber, Jewelry, CNC Punching Engraving(1.1-2.0mm)

Specification: Cutting edge diameter (CED): 0.2mm.
shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.

Check Stock

LC LICTOP 2GT Aluminum Timing Belt Idler Pulley GT2 5mm Bore 6mm Width Toothless for 3D Printer Timing Belt,Pack of 10

✔ Product Contain: 10 x Timing belt pulleys.
✔ Product Size: Drilling diameter: 5mm/0.2", Sutible for GT2 6mm/0.24" wide timing belt..
✔ Product Material: Aluminum, surface oxidation treatment, effective rust prevention, anti-corrosion.
✔ Product Features: Double bearings: Use high quality motor grade bearings to ensure good machine operation..
✔ Applications: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications..

Check Stock

uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..

Check Stock

KINGPRINT 60 Teeth Aluminum Bore 8mm GT2 Timing Pulley for Width 6mm for 3D Printer Parts (Pack of 2pcs)

Product Name: 60 teeth GT2 Timing Pulley.
Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..

Check Stock

Bluemoona Plastic Gears Kits Pulley Belt Shaft Robot Motor Set Worm Crown DIY Car Toy 34Kinds

Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
Multiple specifications: Diameters from 30 mm to 120 mm.
There is about 30-40pcs of Pulley Belts. Use for DIY Toys Module Car..

Check Stock

4-Piece TCT Hole Saw Kit, Tungsten Carbide Tipped Hole Cutter Set with Titanium-Plated Pilot Drill Bit for Hard Metal, Stainless Steel, Wood, Plastic

APPLICATIONS: These Carbide-Tipped Hole Cutter kits cut quick, precise holes in a variety of materials, including stainless steel, mild steel, iron, copper, aluminum, FRP, plastic and brass sheet up to 1/5-Inch (5 mm) thick..
VERSATILITY: Hole Cutters Set includes four commonly used sizes - 3/4 inch (19mm), 7/8inch (22mm），1-3/8 inch (35mm), 1-1/2 inch (38mm), creating holes for conduit and pipe in sizes of 3/4 inch (19mm) to 1-1/2 inch (38mm).
COMPATIBILITY: With a chunk size of 3/8-inch(10mm) these hole cutters compatible with drills, impact drills in a drilling mode and CNC drilling machine..
PRECISION & CONVENIENCE: Each kit includes a split point pilot drill bit preventing bit walking and ensuring very high quality and smooth holes, and an ejection spring providing easy slug removal..
WORRY-FREE: Each hole cutter kit is packed in a Semi-Transparent rust-proof plastic carrying case for safe storage and easy accessibility.
and the carbide technology and optimized tooth geometry provide long lifetime..

Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock