ReviewsCnc 304axis

High Speed Belt Drive Linear Guide Rail 200mm Motion Slide Actuator Module +Nema23for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 500mm/s.
  • Comes with 1.3N.m NEMA23 motor and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 400 MM 16 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

High Speed 700 MM 28 INCH Stroke Belt Drive Linear Guide Rail Motion Slide Actuator Module for CNC Linear Position Kit

  • High precision belt driven linear actuator, the positioning repeatability is ± 0.1mm.
  • Convenient and Easy in use, Smooth operation and low noise,maximum speed 1500mm/s.
  • Comes with NEMA 23 motor base(not motor) and foot mounting bracket, free to replace.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use..
Check Stock

Cenoz Upgrade CNC 3018 Pro GRBL Control DIY CNC Machine,3 Axis PCB PVC Milling Engraving Machine,Wood Router Engraver XYZ Working Area 300x180x45mm (3018-PRO with extension rod)

  • The latest control board : in order to meet most customers needs ,we upgrade the cnc milling machine , provide new version control board ,latest GRBL 3 axis control ,more power ,more precise , include Integrated Driver Chip + Fixed Heat Sink +External Fan +Sturdy ..
  • Quick assembly Version : All components of this 3018 pro cnc engraving machine no need to be positioned, which greatly reduces the time of assembly . It takes only about 20 minutes to complete assembly..
  • Intelligent software: GRBL three-axis control board can be use on Win xp/Win7/Win8/Linux system ,reduce more operational problems .can engrave on plastics, soft aluminum, woods, acrylics, PVC, and PCB..
  • Offline control way : Support offline controller , manually adjust X, Y, Z-axis without connecting to the computer and download files ,not only just a unique gift for your lover, familyfriends ,but also satisfy your desire to create handicrafts perfectly ..
  • Please download the manual via this link: https://shimom.s3.us-east-2.amazonaws.com/Cenoz/cenoz+3018pro.rar , any question welcome to contacting our professional team , we promise to solve your any issue in 24 hours ..
Check Stock

Que-T 4pcs 1.0inches RC Beadlock Wheel Rims Wheel Hubs for 1/24 Axial SCX24 AXI90081 AXI00001 AXI00002 Crawler Car Upgrade Parts (Silver)

  • Outside diameter: 30mm. Width: 15mm. Hexagon adapter: 7.5mm..
  • Made of High Quality Meterial, Stronger And More Durable, Improve The Appearance..
  • CNC machined for precision. Increased strength and precision..
  • Suitable for 1/24 Axial SCX24 AXI90081 AXI00001 AXI00002 JLU C10 RC Crawler Car..
Check Stock

Electric Linear Rail Guide 200mm Ballscrew 1605 Slide Stage Load 250kg Nema23 Motor Base for DIY CNC Z Axis

  • Stork:200mm/8” 400mm/16” 600mm/24” 800mm/32”.
  • Double HG15 Heavy Duty Linear Rail Guide and SFU1605,Ball screw accuracy: C7(±0.02mm).
  • Equipped with BK12 Special shaft end support and high-intensity motor bracket.
  • Standard aluminum alloy profile structure, sandblasted on the surface, beautiful and rustproof, precision hole position CNC processing.
  • Convenient and Easy in use, Smooth operation, high speed and low noise,can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

PULSAR 6.4 Turbo Rebuild Kit Billet Compressor Wheel Combo

  • 5 Axis CNC milled, machined from Solid, make more aggressive blades design possible.Spool up faster, Lower EGTs and More Boost!.
  • High quality CNC machined brass thrust bearings enhances turbochargers durability.
  • Upgrade heavy duty twin hydrodynamic journal bearings extend the turbo service life.
  • Both heat shields added to this kit compare to other kit on the market.
  • Fits 2008-2010 Ford 6.4 F250 F350 F450 F550 compound turbo.
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software:LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Hailege MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver Interface Board with Optocoupler Isolation Blue Board + USB Cable

  • Fully support MACH3 and other computer software controlled by parallel.
  • MACH3 Engraving Machine CNC 5 Axis Stepper Motor Driver.
  • Open all 17 ports. Can be connected with optocoupler drive and can control the 5-axis stepper motor..
Check Stock

Baltic Birch Plywood, 3 mm 1/8 x 12 x 8 Inch Craft Wood, Box of 8 B/BB Grade Baltic Birch Sheets, Perfect for Laser, CNC Cutting and Wood Burning, by Woodpeckers

  • THE WORLD’S FIRST WALL MOUNTED CNC MACHINE KIT: its upright design provides a huge cutting space - up to 32sq ft - on a tiny footprint. By eliminating the heavy and expensive components of traditional CNC milling machines, the M2 becomes a purpose-built, making machine without all the added fuss. It cuts sheets of nearly any material such as wood, metals, plastic and foam, so that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates f....
Check Stock