ReviewsCnc 3d Sensor

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

MroMax M8-1.25x20mm T Slot Bolts Carbon Steel Drop-in Stud Sliding Screw Bolt Metric Hammer Head Bolt for European Standard 40 Series Aluminum Extrusions Silver 20Pcs

  • Material: high quality nickel plated carbon steel.Antirust and long life..
  • Thread Diameter: 8mm (M8), Bolt length 35mm..
  • High quality T head screws for aluminium extrusions, suitable for 45mm metric aluminum extrusions. Post-Assembly drop in hammer head screw, easier to install..
  • Widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
Check Stock

KOOTANS 4pcs 5 Hole 2020 Series L Shape Joining Plate Bracket Outside Right Angle Joint Board Connection Plate Corner Bracket for Standard 6mm T Slot Aluminum Extrusion Profile 3D Printer Frame

  • KOOTANS 2020 Series aluminum profile 5-hole 90 degree L shape outside joining plate, used to connect metric 20 series aluminum profiles..
  • Material: High quality aluminum alloy, used with M5 screws and M5 T-nuts..
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, 3D carvers, CNC Routers, CNC laser cutters,CNC plasma cutters, Robotics Projects, etc..
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a right angle..
  • Package include: 4pcs L shape aluminum outside joint plates..
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

ELEGOO Neptune 2S New Upgrade Version Large FDM 3D Printer Fully Open Source Ultra-Quiet Printing with Resume Printing DIY 3D Printer Ideal for Beginners Printing Size 220x220x250mm

  • 【Integrated Structure Design】 Neptune 2S is a fdm printer based on open source technology. It adopts CNC machining frame and V-guide roller made....
  • 【Self-developed Silent Motherboard】 Built-in improved 32-bit silent motherboard with SMT32 chip, which has stronger anti-interference, more faster....
  • 【Upgrade PEI Magnetic Platform】 A new removable platform is designed for Neptune 2S, which is made of special coating combined with spring steel.....
  • 【Smooth Printing Experience】 ELEGOO Neptune 2S is equipped with resume printing function and filament sensor detection. If there is a power outage....
  • 【What You Get?】 90% Pre-assembled professional-grade brand 3D printer kit. Scalable functions: Automatic leveling and two-color printing. We....
Check Stock

PZRT 10pcs M6 x 20mm Hammer Head Bolt T Screw, 10pcs M6 Hexagon Flange nut Set, Carbon Steel Nickel Plated, for 3030 Series European Standard 8mm T-Slot Aluminum

  • 3030 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • M6 Hexagon Slip Locking Flange Nuts made from high quality carbon steel,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life.
  • Flange nut is a nut that has a wide flange at one end that acts as an integrated, non-spinning washer,the serrations help in avoiding vibration of nut and increase the holding power of nut.
  • High Quality Carbon steel M6 x 20mm T Screw Bolt Screws Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.
  • T-shaped screws are used for aluminum profile design, suitable for standard 8mm T-slot 30 European standard aluminum profiles.
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Pedometer Clip On, Pedometer for Walking, 3D Pedometer for Walking Simple Step Counter Large Digital Display Step Tracker Pedometers with Clip and Lanyard for Elderly, Kids, Men, Women

  • 【EASY TO CARRY】The 3D Pedometer only 26.5g, lightweight and compact size, which is easy to place in your pocket, bag or purse. It is with clip and lanyard, multiple wearing options, yo can clip to your pocket or hip, wear around your neck or place in your pocket or bag..
  • 【3D SILENT ACCELEROMETER SENSOR】2021 Newest 3D Pedometer has advanced 3D Tri-Axis Sensor technology, much more accurate than most pedometers. 3D Tri-Axis Sensor technology provide superior accuracy in reading steps in any position - up, down, flat on its side, or any angle..
  • 【EXTRA LARGE DIGIT DISPLAY】Our step counter with full screen digit display, you can clearly and easily read the numbers at a glance. Besides, pedometer auto sleeps when you are not moving and auto wakes and counts steps when you start moving again, enjoy Great Battery Life..
Check Stock

72Pcs M5 M6 M8 Hammer Head Bolt T Screw and M5 M6 M8 Hexagon Flange Nuts Set Carbon Steel Nickel Plated for 20 30 Series European Standard T-Slot Aluminum Profile

  • Package include:Hexagon Flange Nuts:M5,16PCS.
  • M6,20PCS.Hammer Head Bolt T Screw:M5 x 12mm,8PCS.
  • High Quality Material:Flange nuts and high quality carbon steel T-bolts are made of 304 stainless steel with good corrosion and rust resistance, high hardness, no pollution and long service life..
  • Advantage:Flange nut serration helps to avoid the vibration of the nut and increase the holding force of the nut.Hammer head bolt T screw, high quality nickel plated carbon steel, rust and corrosion resistant..
  • Wide Application : Suitable for building 3D printers, 3D engraving machines, CNC milling machines, CNC laser cutting machines, CNC plasma cutting machines, robot projects, machine guards, workstations, etc..
  • High Quality Service : High Quality Service:Please contact us for any questions or concerns you have,We hope shopping with us is a great experience for you,Thanks for visiting us!.
Check Stock

DZS Elec 6pcs Mechanical Endstop Limit Switch Touch Switch Module for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 RAMPS 1.4 LKB01

  • Mechanical endstop limit switch kit, suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used....
  • High quality 70cm 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating....
  • One-piece plug design, easy to install, hard to snap, convenient to plug or release..
  • Connection: Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s).
  • Common used 1A 125V AC limit switch, strong universality, can be used as switching terminal element of RepRap 3D printer, CNC machine, Arduino / Mega....
Check Stock

Nintendo 3DS XL Persona Q Edition

  • Nintendo 3DS XL Persona Q Edition Design in Collector's Box.
  • 90 percent larger screens than the Nintendo 3DS.
  • 3D upper screen with 3D Depth Slider, lower touch screen.
  • New input and controls: Circle Pad, gyro sensor, motion sensor, and pedometer.
  • Cameras: One inward-facing, dual outward-facing.
Check Stock