ReviewsCnc Controller System

REEFS RC 422HDv2 Servo Winch with Built in Controller, SEHREEFS43

  • Reef's RC REEFS43 - 422HDv2 Servo Winch & Built In Controller.
  • Features: "Submarine Waterproof" 7075 Aluminum CNC-Machined Spool w/Clear Finish 7' Silicone Coated Steel Braided Line, w/Scale Recovery Hook Internal Steel Gears All CNC Aluminum Casing Anodized Color: REEFS GRAY.
  • Includes: (1) Servo Winch with Built in Controller.
  • Specs: Bearing Type: 2BB Operating Voltage: 4.8V-8.4V Weight: 2.84oz Dimension: 1.57" x .79" x 1.5" (LxWxH) Torque: 405oz @ 6.0v / 450oz @ 7.4v / 480oz @ 8.4v Speed: .11sec @ 6.0v / .10sec @ 7.4v / .09sec @ 8.4v Spline: 25T.
  • Part number(s) included (in factory packaging): REEFS43.
Check Stock

4 Axis CNC Controller System DDCS V2.1 Offline Stand Alone PLC 500KHz USB Motion Controller Replace Mach3 G Code for CNC Router Engraving Milling Machine/Stepper/Servo Motor Drive Control

  • 4.3 inches TFT screen, resolution ratio: 480*272.
  • Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card.
  • The main control equipment is 24V-32V/DC power input, the current capacity is required not to be lower than 0.5A.
  • Support the USB flash disk to read the G code,and the size of G codefile has no requirement.
Check Stock

Numerical Control System, CNC Lathe Controller, Low Noise Program Reading for Program Editing(Four axis)

  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
Check Stock

AC Infinity AIRPLATE T7, Quiet Cooling Fan System with Thermostat Control, for Home Theater AV Cabinets

  • An ultra quiet fan system designed for cooling cabinets that requires minimal noise..
  • Features an onboard processor that provides a digital readout of the cabinets temperatures..
  • Programming includes thermostat control, fan speed control, and SMART energy saving mode..
  • Fan and controller contain CNC machined aluminum frames with a modern brushed black finish..
  • Dimensions: 11.7 x 6.1 x 1.3 in. | Airflow: 104 CFM | Noise: 19 dBA | Bearings: Dual Ball.
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

Mini Woodworking Lathe, Multi-Functional 6 in 1 Motorized Woodworking Lathe Tool US Plug 110-240V

  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
Check Stock

Crazy Sales CNC Lathe Controller, Numerical Control System, High Precision for Program Editing Program Reading(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Low Noise CNC Lathe Controller, Simple Operation Numerical Control System, for Program Editing Program Reading(Dual axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

VEVOR CNC Router Machine 3018-PRO w/GRBL Offline Control Limit Switches & Emergency-Stop PCB PVC Wood leather Engraving Machine Dustproof Safe Acrylic Baffle XYZ Working Area 300 x 180 x 45mm

  • GRBL Offline Controller: This cutting machine has an independent GRBL controller. The operable 1.8" display can adjust the XYZ axes and manually turn....
  • Double Security Design: This CNC router machine features two 5mm acrylic baffles on each side, so you can safely monitor the engraving process and....
  • High Hardness & Precision: This CNC 3018-PRO is constructed with an aluminum alloy frame and three refined XYZ axes, featuring corrosion resistance....
  • Efficient Pre-assembly: For your convenience, we have assembled the basic frame in advance to save your time. With the detailed user manual and....
  • Extensive Application: This CNC 3018-PRO machine comes with 20 pcs drill bits, featuring high strength, high precision, and outstanding performance,....
Check Stock

AC Infinity AIRPLATE S3, Quiet Cooling Fan System 6" with Speed Control, for Home Theater AV Cabinets

  • An ultra quiet fan system designed for cooling cabinets that requires minimal noise..
  • Features a multi speed controller to set the fans speed to optimal noise and airflow levels..
  • Contains a CNC machined aluminum frame with a modern brushed black finish..
  • Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25 percent..
  • Dimensions: 6.3 x 6.3 x 1.3 in | Airflow: 52 CFM | Noise: 18 dBa | Bearings: Dual Ball.
Check Stock