ReviewsCnc Cutting Tools

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..

Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
: ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..

Check Stock

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..

Check Stock

LAIWOO CNC Router Bits Set 1/4(6mm) Shank, Engraving Wood Carving Router Bit 6mm & 4mm, 60° & 90° V-Groove, 20° Profile bit, 15° Detail Carving Bit, Tungsten Steel - 4PCS

【PREMIUM MATERIAL】 Our cnc router bits is made of high hardness and wear-resistant tungsten steel, which is not only sharper but also less prone to breakage compared with ordinary carbide cnc bits, which will improve your work efficiency and completion..
【EFFICIENT CUTTING PERFORMANCE】 These precision mirror-finished cnc engraving bits with scientific chip groove design prevents wood chips from affecting your work. Also the cutting speed is fast and the cutting surface is flat & smooth..
【INVIDUAL PACKAGE】 4pcs package, each one is individually packaged for easier storage. Package contains 1 x 15° detail carver, 1 x 20° profile bit, 60° and 90° V groove bits..
【WIDE APPLICATION】 These router bits for cnc are suitable for MDF, PVC, acrylic, solid wood, plywood, organic board, etc. Widely used for cutting/carving/engraving/grooving/drilling/positioning/roughing/milling. More suitable for wood carving..
【PERFECT SERVICE】 We value our customers' experience, if you have any questions, our customer service team will reply within 24 hours. In addition, you will enjoy 12 months warranty, any quality problem we will solve for you!.

Check Stock

MEIGGTOOL 7Pcs 1/4'Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2',3/8',5/16',1/4',7/32',3/16',1/8'(Red)

Size: 1/4"Inch Shanks Roundover Edging Router Bit Set,Round Radius: 1/2",3/8",5/16",1/4",7/32",3/16",1/8".
Blade Material：Industrial grade C3 micro-grain carbide cutters and solid hardened steel bodies with high quality guide bearings provide superior wear resistance..
Widely Applications: The Top Bearing Rounding Edge Forming Router Bit Suitable for Woods, MDF, Laminate, Particleboard, Plywood compact panel, Acrylic, and etc. Avoid cutting metal and non-wood materials..
Easy To Use: Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Router Collett: Contains a 1/2" to 1/4" Router Collett that easily fits into any router tables or router tools for a secure fit..

Check Stock

Freud 87-208 8Piece CNC Router Bit General Purpose Set, Multi, One Size

Advanced cutting geometry for superior chip evacuation and finish quality.
Enhanced TiCo super density Carbide with chromium designed and manufactured by Freud for 2x cutting life.
Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish.
Each bit in tis set was designed for CNC machines to deliver a long cutting life, maximum durability and a high quality finish. Ideal for sign making, lettering and engraving in a variety of materials like wood, plastics, composites and more..

Check Stock

Amana Tool - 46202-K Solid Carbide Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia

SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action....
FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits..
CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate,....
SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our Spektra bits feature a....
INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in....

Check Stock

MNA 1/4 Inch Shank CNC Spoilboard Surfacing Router Bit,4PCS Router Bit Set,4 Wings,1-37/64-Inch Cutting Diameter,1/4' 5/16' 3/8' 1/2' Milling Depth

MNA CNC spoilboard surfacing router bit is ideal for fast removal of material over a large surface area leaving an improved finish at the bottom of the cut..
4 WINGS WOOD CNC ROUTER BIT:1/4-Inch Shank Rabbet Slot Cutter Router Bit Set, Shank Size: 1/4", Cutting Diameter: 1-37/64", Cutting Depth: 1/4"-1/2" , Cutting Height: 1/4", 5/16", 3/8", 1/2".
4 Different cutting height router bits can use as spoilboard surfacing router bits or rabbet slot grooving bits.
American industry classification C3 Carbide. Fit for all types of wood material, such as: MDF, hardwood, softwood, and particle board..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..

Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.

Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
Fast chip-removal speed leaves an unobstructed path for the end mill.

Check Stock

Thten Trimmer Replacement Spools Cap Covers Compatible with Greenworks 21332 21342 24 Volt 40V 80V Cordless Weed Eater with 3411546A-6 Cap Covers Parts Auto-Feed String Edger 16ft 0.065” 2925 (2 Pack)

[Spool Cap Specification]: Compatible with Greenworks spools, 16ft 0.065 inches, compatible with original spools models 29252 and cap covers models 3411546A-6..
[Compatible models]: Compatible with greenworks weed eater string trimmer Cap: 21332, 21222A, 21602, 21062, 21132, 21242, 21282, 21312, 21302, 21342, 21362, 21262, 2100202, 2100302, 2100702, STBA40B210, ST40B410, BST4000, ST40L00..
[Professional CNC winding spool Cap]: Compatible with green works spools by the CNC machine cutting and winding, automatic line change. Manual winding is cumbersome and can easily get stuck during use, which can cause damage to the string trimmer..
[Rugged material]: High-quality ABS spool & durable polyamide nylon thread, flexible and long service life. Use centrifugal force and aerodynamics to reduce drag and achieve fast cutting..
[Precautions for use]: When you using this product, protective measures should be taken to avoid damage to the body caused by spilled wires. The product is only suitable for young grasses. For strong weeds, use other tools such as blades to trim..

Check Stock