ReviewsCnc Encoder

10PCS 5 Pin Rotary Encoder+Washers+Nuts DC 5V EC11 Rotary Encoder Coding Switch Digital Potentiometer with Switch

  • [Specification]- Type: EC11 Encoder without Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 5pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Bemonoc Encoder Metal Gearmotor 12V DC Low Speed 60 RPM Gear Motor with Encoder for Arduino and 3D Printers

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

CUI Inc AMT102-V AMT10X Series 3.6 to 5.5 V 2-8 mm Open Center Capacitive Encoder Switch Kit - 1 item(s)

  • [Specification]- Type: EC11 Encoder with Screw Thread.
  • [Rotary encoder]- By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0..
  • [Applications]- Rotary encoders are widely used in industrial controls, robotics, photographic lenses, computer input devices such as optomechanical mice and trackballs, controlled stress rheometers..
  • [Package Content]- 10pcs x Rotary Encoder Code Switch Digital Potentiometer.
Check Stock

SJ@JX Arcade USB Encoder Fight Stick Raspberry Pi Joystick Button PC MAME Retro Pie Zero Delay USB 5V Encoder Board

  • Zero Delay Arcade USB Encoder For Your Pc Game DIY.
  • Use this Encoder you can build your own Arcade Game Machine.
  • The size for the encoder board just 8.5 cm X 3.5 cm X 1 cm..
  • Support All windows systems! Such as Windows XP,Windows 7,Windows 10.
Check Stock

Sensitive Arcade Buttons DIY Kit Arcade Buttons Game Controller Kit for Fight Stick Mame

  • Use the accessories to build your own Arcade Game Machine..
  • Support all systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME & For Fight Stick, etc..
  • Zero Delay Arcade USB Encoder with USB Cable & Wires. Perfect Kit for Arcade PC Game DIY Project..
  • Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer....
  • Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
Check Stock

Sinoblu 1/2 to 1/2inch Flexible Spider Couplings for Servo Stepper Motor Diameter 30mm Length 35mm

  • Size：Diameter 30mm Length 35mm/Diameter 1.18inch Length 1.38inch. Bore 12.7-12.7mm/0.5-0.5inch. Type: Plum shaped.
  • Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
  • Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
  • Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
  • Wide Range of Usage: Flexible Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

Sensitive Professional Arcade Buttons Diy Kit Plastic And Metal Colourful Arcade Diy Kit for Mame Fight Stick

  • Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
  • Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer....
  • Zero Delay Arcade USB Encoder with USB Cable & Wires. Perfect Kit for Arcade PC Game DIY Project..
  • Use the accessories to build your own Arcade Game Machine..
  • Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME & For Fight Stick, etc..
Check Stock

Professional Arcade Buttons Diy Kit, Wear-Resistant Sensitive Arcade Diy Kit , Zero Delay Windows Systems for Fight Stick Mame

  • Professional 8 way Joystick with terminal for playing 2/4/8 way Arcade Fighting Games. A compact encoder with size of 8.5cm x 3.5cm..
  • Easy installation design, simply connect your arcade controls to the encoder board with the included wires, then plug the encoder into your computer USB Port. And then enjoy your arcade games with your PC..
  • Use the accessories to build your own Arcade Game Machine..
  • Zero Delay Arcade USB Encoder with USB Cable and Wires. Perfect Kit for Arcade PC Game DIY Project..
  • Support all windows systems, such as XP, Win7, Win8, Win10, etc. Compatible Model: For MAME and For Fight Stick, etc..
Check Stock

Hikig Zero Delay LED PC Encoder USB to Joystick for LED Arcade Buttons & Joysticks - DIY Your Own Arcade Game Console - MAME, Raspberry Pi Compatable

  • 2-Player LED USB Encoder Set: This is a 2-Player LED Arcade USB Encoder Set. Power Your Standard LED Arcade Buttons Directly..
  • Compatable for Almost All Type Joysticks: The Wire harness compatable for no matter Standard American Style Joystick or Japan 5Pin Style Joysticks..
  • Voltage: 5V (The Encoder Board Output 5V Power for both joysticks and LED Arcade Buttons..
  • 100% Zero Delay: Both Encoder Boards are 100% Zero Delay to Offering Better Game Experience..
  • Support Standard LED Arcade Buttons. The Set including 20 Pcs 3Pin Cables for the LED Buttons. Easy to install..
Check Stock