ReviewsCnc Machined Square Nuts

Traxxas 3741X Red-Anodized Aluminum Turnbuckle Set

  • 【Premium Material】 Steel turnbuckles (CNC Machined).
  • 【Long Suspension Link】 6 x linkages, (turnbuckles assembled with camber link :approx. length from 68 to 88mm,center to center), replace....
  • 【Short Suspension Link】 1 x linkage (approx. length from 46 to 60mm,center to center),replace 1935,upgrade for 1/10 2wd Slash,Slash VXL,Ford F-150....
  • 【What You Get】 7 x Adjustable Metal Links,14 x Screws and 8 x Nylon Lock-Nuts.
Check Stock

Fyland 1' Flashlight Mount 45 Degree for M-lok Rail Systems TL61

  • 100% CNC Machined out of 6061 billet aluminum,lightweight and sturdy..
  • 1" Flashlight mount: 1" internal diameter fits any 1" Flashlight..
  • Perfect M-lok attachment point: Designed to fit any m-lok rail..
  • Mount can be placed at 1, 5, 7, and 11 o'clock positions..
  • Includes m-lok nuts, screws and Hex wrench..
Check Stock

2 Hub Centric 2' Wheel Adapters Spacers 8x170 Compatible with Ford Super Duty 99-02 14x2.0 - Rear

  • Hub centric design for both vehicle and wheel side.
  • CNC machined from 6061 T6 aircraft quality billet.
  • including 16 pre-installed studs and 16 mounting lug nuts.
Check Stock

Johnson Level & Tool RAS-120 Aluminum Rafter Square w/Manual, 12

  • RAFTER ANGLE SQUARE: Johnson Rafter Tool gets the job done easily and accurately with a strong aluminum body featuring CNC machined edges. This versatile tool is perfect for professional builders and contractors..
  • POWDER-COATED FINISH: This rafter square & protractor features permanently etched graduations and numbers that are easy-to-read due to the low-glare, protective powder-coated finish..
  • ACCURATE MEASUREMENTS: This square layout tool has scribe notches beginning at 1-3/4" that are excellent for transferring outer increments from the pivot point, as well as convenient markings that measure 24 board dimensions of 1-1/2", 3", and 3-1/2"..
  • APPLICATION RANGE: The thick edge of this angle square is perfect as a saw guide for cross-cuts or angled cuts utilizing the engraved protractor scale. It can also be utilized indirectly, by scribing notches to form a saw cut line for rip cuts..
  • SIMPLIFIES STAIR LAYOUT: This 12" triangle square integrated distance and angle scale allows you to draw your cut lines on your stringers quickly and precisely. This rafter square contains scales for cutting hip, valley, and jack rafters..
Check Stock

Boloniprod 4Pcs Angle Clamps Bar Clamps Right Angle Fixing Clip Multi-function Woodworking Right Angle Clamp Adjustable Swing Corner Clamp Corner Clip Fixer for Welding,Wood-Working,Making Cabinets

  • ... line as an auxiliary function of angle drawing/ measuring, on both end edges have 135°bevel. The scientific and reasonable anchor hole spacing can effectively maintain the strength of aluminum alloy (Patent Pending).
  • High Durable Alloy Material: The right angle clamps squares made with Aluminum Alloy(6061-T6). CNC Machined from solid aluminum, don't break.Anodized red surface,corrosion-resistant, anti-rust, has a durable and long service life..
  • Professional Woodworking Tools: 140*140mm carpentry right angle jig professionally used for making drawers, photo frames, boxes, abinetsand positioning corners, convenient for wood board jointing and gluing. Simplify woodworking projects, save time, and make the finished product better. （More instructions see the use manual/ e-book）.
  • Easy to Use: The woodworking square have beveled edges, L shaped corner clamp is easy to use..  Just place the square in the corner of the two stock pieces you need to square and secure with a set of clamps. This set of squares and clamps can make your operation more convenient. The set squares and clamps are fully adapted to various large and small DIY projects.
  • Best Size/ Packaging Include: The actual Woodworking work shows that this size(140mm/5.5 inch Squares)set is a very ....
Check Stock

TRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for 1911 Pistols 260 Front 450 Rear Black One Size

  • UNMATCHED VISIBILITY in low light shooting conditions or complete darkness.
  • GLOWS IN THE DARK—no batteries or light exposure required.
  • In daylight, sights are standard BRIGHT WHITE DOTS.
  • Made of tough, CNC-machined steel with a FORTRESS FINISH COATING for maximum protection.
  • SNAG RESISTANT DESIGN fits standard holsters.
  • MACHINED AND ASSEMBLED IN THE USA with quality Swiss Tritium for maximum brightness.
Check Stock

2 Hub Centric Wheel Adapters Spacers 5x135 Compatible with Ford F150 Thickness 2 Inch 14x2 Studs

  • Hub centric design for both vehicle and wheel side.
  • CNC machined from 6061 T6 aircraft quality billet.
  • including 10 pre-installed studs and 10 mounting lug nuts.
Check Stock

2 Hub Centric Wheel Adapters Spacers 5x115 to 5x115 Compatible with Charger Magnum 300 Thickness 1 Inch

  • Hub centric design for both vehicle and wheel side.
  • CNC machined from 6061 T6 aircraft quality billet.
  • including pre-installed studs and mounting lug nuts.
Check Stock

Amazon Basics 73-Piece Magnetic Ratchet Wrench and Screwdriver Set & Folding Hex Key Set - 3-Pack, Metric/SAE/TORX

  • 9.5 inch offset hex wrench for using on hex nuts, square nuts, unions, and valve-packing nuts.
  • Drop-forged steel alloy construction with polished, corrosion-resistant finish.
  • Precision-machined teeth are heat-treated for hardness and excellent grip quality.
  • Wide jaw allows for easy fit adjustment on large pipes.
  • Dimensions: 10.63 x 4.33 x 1.18 inches (LxWxH).
Check Stock

HONGK- Brake Pedal Compatible with Suzuki Volusia 800 Marauder Boulevard M50 C50 Intruder 1500L C90 [B01C0SZ2N4]

  • 【Fitment】 Fit for KX250F 2006-2018 KX250 2019.
  • The aluminum brake pedal uses an extremely tough forged aluminum arm with a CNC machined toe tip to make this brake pedal one of the strongest you can buy for your motorcycle..
  • The CNC machined tip is spring-loaded and rotates to prevents damage from crashes and impacts..
  • The CNC tip also features stainless steel cleats for maximum traction..
Check Stock

BW USA Berm Platform Bike Pedals - Lightweight Aluminum Flat Pedals for MTB and BMX - Green

  • CNC MACHINED 6061 ALUMINIUM BODY - Machined aluminium body for a lightweight, durable construction..
  • 113 X 105MM 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals. WITH10 REPLACEABLE STEEL TRACTION PINS PER SIDE - Give yourself a place to hang on with 10 traction pins that bite in and stick your shoes to the pedal. The generously sized platform offers stability, comfort and grip while the low-profile design gives added ground clearance..
  • 9/16 CNC MACHINED CR-MO AXLE - Durable Chromalloy axles make for solid long lasting pedals..
  • SEALED BEARINGS - Sealed bearings keep the elements out and contribute to long-lasting, smooth rolling pedals..
  • LIGHTWEIGHT - At just 205g each, these pedals weigh less than many higher priced competing models..
Check Stock