ReviewsCnc Machining Parts Service

MZS Black Motorcycle Brake Clutch Levers Wheel Roller Adjustable Short CNC Compatible with CMX 300 500 Rebel Fury VTX1300CX VT750 Phantom Shadow NC750S NC750X Black Spirit

...your bike before ordering. Be sure to follow the installation instructions (in the box) to check and test before riding..
UPGRADE DESIGN - MZS has created a range of brake and clutch different to other motorcycle levers, shape and design of the handle follow ergonomic viewpoints. And modern T6061 CNC Ultra-precision machining techniques are used which ensure a long life of the product and a good visibility of the mechanical engraving logo..
WHEEL ROLLER ADJUSTABLE - It added ultra-tight spherical anti-slip parts, and it is covered with the skidproof stripe, prevents the fall off of the chosen adjusters setting and lever position of the during driving. Compared to the dialing point design, the wheel roller design allows for finer adjustments, gives the best clutch or brake response..
MZS ADVANTAGE - This touch feel high texture matte finish surface levers can make your fingers feel perfectly on the levers. High quality anodized CNC short levers increases durability and hardness, and with beautiful glossy and vibrant finish..
HIGH QUALITY COMPONENTS - MZS wheel levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome silicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners..

Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..

Check Stock

Mingdun BT30 ER32 70L Collet Chuck Tool Holder ER32 Toolholder CNC Milling Tool Holder

It's suitable for drilling, milling, engraving, high precision, widely used in precision machining.
Package Include:1 x BT30 ER32 70L CNC Milling Chuck Holder.
The measurement of the actual items may slightly different from the listing images due to manual measurement,please allow 0.5-1mm difference. Thanks for your understanding..
Safe transportation with reliable package, deserving your trust..

Check Stock

MRELC Universal Motorcycle 7/8 22mm Handlebar Brake Master Cylinder Clutch Lever CNC Left & Right Set Compatible with Harley Honda Kawasaki Suzuki Yamaha（ Piston Diameter 12.7mm Blue

【Compatible With】:Universal Motorcycle 7/8" 22mm Brake Master Cylinder Clutch Lever,uitable for most Chinese motorcycles. (Compatible with Eg Harley Honda Kawasaki Suzuki Yamaha).
【Reasonable design】： Adjustable design, clear between each gear, not easy to slip. The pivot design allows the lever to fold outward to prevent bending or breaking in the event of a collision..
【Material】：6061-T6 Aluminum Alloy， corrosion-resistant alloy, high hardness (up to HV90 degrees), good oxidation effect. There are no trachoma pores, and the flatness is better..
【Processing technology】: Aluminum Alloy Lever Body + CNC pump.CNC machining process，stable machining quality, high machining accuracy,100% Brand New..
【Package includes】: 1* Left pump + 1* Right pump +1*brake light switches).

Check Stock

HGC MT2 Rotary Live Center Shaft Morse Taper Heavy Duty Bearing Lathe Metal Turning

Uses: Suitable for high-speed turning of metal or wood, CNC machining and general purpose of manual engine lathes..
The measurement of the actual items may slightly different from the listing images due to manual measurement,please allow 0.5-1mm difference.Thanks for your understanding..
Shipped from US with an estimated receiving time of 2-5 business days..

Check Stock

SpeTool 1/4 Shank Carbide End Mill for Aluminum Cut (3 Flutes, 3.5 inch Long) Non-Ferrous Metal Upcut CNC Spiral Router Bit

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length.
The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SpeTool Extra Long End Mill for Aluminum 5/16in CNC Router Bits Metal Cutter 3-Flute Tools, 1-5/8in Flute Length, 4in Overall Length

Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-5/8 inch Cutting Length, 4 inch for Total Length.
The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Endmill Suit for CNC Router and Brand Plunge Router with 5/16" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

SpeTool 3 Flute Carbide End Mill for Aluminum Non-Ferrous Cutting Tool Upcut Bit for CNC Machine, 1/2 Inch Shank, Extra Long 4 Inch

Solid Carbide Spiral Router Bit with 1/2 inch Shank and 1/2 inch Cutting Diameter, 2 inch Cutting Length, 4 inch for Total Length.
The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining..
For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
The Carbide EndMill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/2" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..

Check Stock

LYunce RC Brake Disc RC Simulation Brake Discs CNC Machining Compatible with TRAXXAS TRX4 TRX6 ( Color : Yellow )

1. Material: Made of high quality aluminum alloy material, which is wear resistant, rustproof and durable..
2. Easy to Install: The fine appearance and perfect style, accurate size and shape make it easy to assemble and disassemble..
3. Light and Thin: Light in weight, will not increase the burden of your remote control car..
4. CNC Machining: The use of CNC machining technology makes it accurate in size and stable in performance..
5. Good Fitment: The anodized surface is easy to install and can directly replace old or damaged ones..

Check Stock

Hex ER-32 Collet Chucks Block Workholding Holder for CNC Lathe Engraving Cutting Machine

The ER32 Block dimensions are 2.75inch x 1.95inch.
The ER32 collet block is made of hardened tool steel, high strength and hardness, strong structure..
The ER32 collet block is practical and reliable for fast set-ups on CNC machines, excellent and stable performance..
For parallel, square or hex shapes as well as for cross hole drilling at 60, 90 or 120 degrees.
Can be used standing upright, the collet block holder with through hole is great to be used for machining long parts.

Check Stock