ReviewsCnc Metal Parts

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..

Check Stock

76.4 Carbon Fiber Camera Tripod with 35mm Low Profile Ball Head ARTCISE Professional Lightweight Compact Tripod with 1/4 Female Thread Hole for DSLR Camera Video Camcorder Max Load 33lbs/15kg

...on hole. At the same time we also give away CNC magic hands, CNC phone clips and extra quick release plates. The new design and rich accessories can provide a comfortable shooting experience and better equipment protection..
【High quality】This carbon fiber tripod uses 8 layers of 100% carbon fiber,main parts all metal made and via CNC Anodic Oxidation technology, 25.5mm large diameter tube,the load capacity can reach 33lbs (15kg). A stability hook can hang additional weight and the non-slip rubber feet design to increase the stability..
【Low profile ball head】This low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, anodized surface, it is very strong and durable.Compared with traditional ball head, low-profile ball head design create stronger locking force and higher stability..
【2 in 1 Tripod Monopod】This tripod can be quickly disassembled with the central axis screw and transformed into a monopod (35” to 80”). It can be turned into a monopod or walking stick alone to make your photography more diverse. And the central pole can be inverted to allow for low angle shooting and macro photography..
【Extend easily】Tripod tube with quick release twist locks allow you to adjust the tripod height for 2....

Check Stock

MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod

⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.

Check Stock

ARKMODEL VIIC Kit 1/48 German U-Boat RC Submarine Include Single Piston Tank WTC

... VIIC Kit introduction: This is a HIGH QUALITY model kit. Designed by detailed drawing and resource. Suit for building an RC model or a static display model. Hull and all components are the ABS plastic injection forming. Part of the detail components and power components can provide metal material, CNC precision machining and become upgrade kit. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction.
This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes all plastic parts, metal parts, brass etching tablet, water stickers,specifications, and installation of the chamber components. Used to drive the submarine voyage, snorkeling chamber, all the mechanical and electronic equipment, such as motors, pistons, steering gear, electronic governor, electronic switch, etc., are installed in the WTC.
This one VIIC already included WTC (water tight cylinder) Single Piston tank Kit,WTC Size:Length 736mm ,Beam 90mm Already included servos, ESC, BCU.

Check Stock

Fstop Labs Replacement for DJI Phantom 3 Gimbal Yaw Arm + Gimbal Cable Kit in CNC Aluminum for Professional/Advanced / 4K

Compatible with Phantom 3 Professional, Advanced, 4K.
Includes gimbal ribbon cable, yaw arm, set screw, hex wrench.
Anodized Silver to match original partsDescriptionIntroducing our Aluminum direct replacement gimbal parts for the DJI Phantom 3 Professional, Advanced, and Standard. These are CNC-machined out of a solid block of 6061 aircraft-grade aluminum. Guaranteed OEM fitment and function..
CNC-machined from solid 6061 aircraft-grade aluminum Guaranteed.
Painted silver to match original DJI parts.
Yaw Arm + Roll Arm + Roll Arm Cover + Alignment Tool.
Tweezers (helps to manipulate ribbon cables and screws).

Check Stock

CrazyHobby 4PCS Aluminum Front & Rear Suspension A-Arms Set and Tie Bar for 1/10 Traxxas Slash 2WD Upgrades Parts, Replacement of 2555 3631 2532 (Blue)

The Upgrade Parts Compatible with Traxxas 1/10 Slash 2WD Short Course Truck. NOT fit Stampede 2WD / Rustler VXL..
Come with Screw Pins, Easy upgrade from the original parts, easy to install..
Made of Aluminum Alloy, Anodized, CNC machined, High precision, Lightweight & Durable..
You will get: Aluminum Front Lower Suspension Arms Set(Left&Right).
Aluminum Rear Lower Suspension Arms Set(Left&Right).
Metal Aluminum Tie Bar. Replaces Stock Part# 2555 3631 2532..
100% New, Genuine CrazyHobby Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.

Check Stock

Hobbypark Metal Aluminum Chassis for 1/18 Traxxas LaTrax Teton Rally, Replacement Parts of 7522 (Navy Blue)

✔These replacement accessories compatible with Traxxas 1/18 LaTrax Teton, Latrax Rally RC Cars Trucks Models.
✔Upgrades of stock part #7522,CNC machined for precision,easy upgrade from original ones.
✔These option parts made of 6061-T6 aluminum, Anodized, for lightweight and durable performance..
✔Package include: 1x Metal Chassis (As shown).
✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service.

Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

...mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..
✅Easy assembly : Main parts are pre-assembled, easy assembly process that takes 15-20 min. Wires are labeled clearly for fast connection and bundled into drag chain for easy management..

Check Stock

Piaoyu Telescopic Slingshot for Hunting Slinghot Rifle for Adults Package1

【Details Description】The product reserves the installation position of trigger and grip..
【Product Introduction】The length of the product after installation is about 1m, and the length of the rubber band is about 70cm.The product has....
【Product Process】CNC Technics Making.The main parts of the product are made of metal.The sliding contact position is equipped with bearing, which....
【Product Use】This product can be used for outdoor sports shooting, can also be used to hunt small animals.It can also be converted into a fish....

Check Stock

HGC MT2 Rotary Live Center Shaft Morse Taper Heavy Duty Bearing Lathe Metal Turning

Uses: Suitable for high-speed turning of metal or wood, CNC machining and general purpose of manual engine lathes..
The measurement of the actual items may slightly different from the listing images due to manual measurement,please allow 0.5-1mm difference.Thanks for your understanding..
Shipped from US with an estimated receiving time of 2-5 business days..

Check Stock

Redcat Racing Gen8 V2 International Scout II 1/10 Scale Rock Crawler Scale Truck, Green, GEN8-V2-GREEN

Portal axles, Divorced transfer case, High strength 1.5mm C-Channel chassis rails, 4-Link suspension, Aluminum threaded shocks, Functional 1.9 beadlock wheels, CNC machined spools, Metal wheel hexes, Rubber sealed ball bearings throughout, 47º precision steering, Panhard bar, Front mounted motor..
Licensed International Harvester Scout II body, Hard plastic grill, LED ready body and bumpers, Plastic folding mirrors, Molded inner and outer fenders, Licensed Interco Super Swamper tires, Shackle mount bumpers (LED ready), Plastic rock sliders.
Adjustable wheel base, Adjustable ride height, Adjustable toe angle, Multiple shock positions, Adjustable approach and departure angle, Tunable suspension, Lockable adjustable slipper clutch, Many upgraded parts available, Many 3D printable parts available..
17T 550 brushed motor, Waterproof crawler ESC, Hexfly waterproof steering servo, 2.4GHz radio system..

Check Stock