ReviewsCnc Milling Machine Tool

SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..

Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.

Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

...ngraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quieter and more steady and is ideal for intricate patterns..

Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....

Check Stock

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Spiral End Milling Cutter, 5Pcs Spiral End Mill 8mm Shank 1‑Flute CNC Milling Cutter Tool High Speed Steel 8x7x14x60mm

【Excellent Performance】The product come with high performance, which can improve work efficiency and reduce costs.
【Finely Processed】Provide up and down spiral processing without burrs, perfect combination of blades.
【Excellent Quality】High‑speed steel material possess good process performance, good combination of strength and toughness.
【Durable In Use】High‑accuracy grinding and polishing, high wear resistance, high temperature resistance, good rigidity, not easy to break.
【Apply To】Suitable for CNC milling machine processing centers, woodworking machine tools, advertising CNC milling machines, etc..

Check Stock

ChgImposs Mist Coolant Lubrication Spray System with 5Ft Flexible Pipe and Check Valve for Metal Cutting Engraving Cooling Machine/CNC Lathe

Air flow and spray mist volume adjustable design, easier to use..
Save 60-80% lubricants compared with the oldest lubrication tube..
Set multi function all in one, cooling, lubrication and blowing the metal chips..
Installed on CNC lathe, milling machine for improving machine ability, cutting speed, and extending tool service life, saving working time and production cost..

Check Stock

4-Flute End Mill High Speed Steel End Mill Bits Carbide Straight Shank Square Nose End Mill Cutter 10mm/0.4in Diameter x 75mm/3in Length

HSS MATERIAL ENSURES LONGER USE AND HIGH EFFICIENCY--This end mill is made of high speed steel which ensures good milling, cutting performance and high work efficiency.
HIGH HARDNESS AND STRENGTH REDUCIN DAMAGE--It has sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength.
FINE AND SMOOTH OFFERS SAFETY USE--Well polished surface is quite clean, neat, and there is no glitches or burrs on the shank.
SHARP EDGE OFFERS QUICK CUTTING--It has high strength, hardness and wear resistance and the cutting edges are quite sharp.
IDEAL TOOL FOR CNC MACHINE--Widely used for milling holes, grooves and edges on plates and the process will be smooth.

Check Stock

Beall Collet Chuck, Easy To Replace Lathe Collet Chuck Wear-resistant and Durable for CNC Machining Center

Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
As milling machine accessories, convenient to replace the broken one.

Check Stock

Beall Collet Chuck, Stable Performance Lathe Collet Chuck with ER32 Wrench Collet Chuck Holder for CNC Machining Center

As milling machine accessories, convenient to replace the broken one.
Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.

Check Stock