ReviewsCnc Router Bits

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

  • Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Genmitsu CNC Router Bits 1/8 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 10 PCS, SR10A

  • High Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/8''(3.175mm), cutting diameter: 1/8'' (2.175mm), cutting length: 17mm, overall length: 38mm, comes with 10pcs 1/8 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR10A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

SpeTool Spiral Downdcut Router Bits Extra Long (4 inch) with 1/2 Inch Shank, 1/2 Inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Genmitsu CNC Router Bits 1/4 inch Shank Straight Router Bits Nano Blue Coat 2-Flute End Mill Cutter for Wood MDF PVC Acrylic, 5 PCS, SR05A

  • High Quality: Made of tungsten steel that's great for milling and cutting performance, ensure your work efficiency. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 1/4'' (6.35mm), cutting length: 25mm, overall length: 55mm, comes with 5pcs 1/4 shank 2-Flute Straight Router Bits..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu SR05A 2-Flute Straight Router Bits are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving

  • INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
  • SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
  • These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
  • The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
Check Stock

CNC Spoilboard Surfacing Router Bits, 1/4 inch Shank 1 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK (Carbide)

  • 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
  • VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
  • USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

HQMaster Combination Kit Set Router Bits Cutter Cutting Milling Tool (4 Type, Each 10Pcs) Including Flat/Ball Bits, 10 V-Shape Engraving Bits

  • Cost-effective bits: package include 4 type bits each 10pcs assorted in 4 storage cases meet most standard milling applications).
  • Perfect cutting: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. made of quality ultral fine tungsten carbide material.
  • Excellent cutting results and enhanced productivity.
  • Wide Compatibility: compatible with most desktop or industrial CNC machines. Used for carving, engraving, milling, dadoing, boring, routing, slotting in materials like density board, wood, acrylic, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Used for PCB, SMT, the CNC, mold, plastic, thin copper/aluminum/stainless steel and other precision metal parts processing.
  • High efficiency: These bits own sharp edge which is able for fast engraving that makes high efficiency.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
  • Well made & Excenllent Performace: Mirror polishing and space of Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock

Genmitsu CNC Wood Carving Router Bits Set, 1/4'' Shank, 4 PCS, 15° Detail Carving Liner+ 20° Profile bit+ 60° & 90° V Groove, WC04A

  • High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: This wood carving set comes with 4 PCS, 1/4” shank router bits. 1PCS 20° profile bit for etching and outlining.
  • 1PCS 15° carving liner for fine lines and details.
  • 60° & 90° V groove bits for multiple background depths..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock