ReviewsCnc Router For Advertising

CNC Spoilboard Surfacing Router Bit, 1/4\ Shank 1-1/2\ Cutting Diameter, Carbide Insert Slab Flattening Router Bits Planing Bit Wood Planer Bit Woodworking Tools by BINSTAK

  • 2-WING INSERT CNC ROUTER BIT: Shank: 1/4".
  • Carbide Inserts: 12*12mm. 2-wing design, resulting in a more balanced tool while running..
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 2 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
  • The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
  • For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
  • The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.
Check Stock

1\ Radius Roundover Router Bit 1/2\ Shank, Edge Forming Roundover Bit Bead Rounding Over Edging Bit by BINSTAK

  • INDUSTRIAL QUALITY ROUND OVER BEADING ROUTER BIT: Excellent for producing smooth, uniformly rounded edges. Great for edging, beading and/or molding applications. And can be used without the bearing as a standard straight bit, Great for combined plunge-cutting and pattern/template routing..
  • USE RANGE for ROUNDOVER ROUTER BIT: Suitable for hard woods, mdf, laminate, particle board, plywood compact panel and etc. Avoid cutting metal and non-wood materials..
  • HIGH QUALITY CNC ROUNDOVER OVER BIT: The sharp YG6X virgin carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This round over edge bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, it can withstand some heavy duty use and the test of time..
  • Use on CNC and other automatic routers. Such as woodworking engraving machine, trimming machine, CNC hand-held, table-mounted router, etc..
Check Stock

Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine

  • Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
  • Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
  • Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
  • Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
  • Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

SpeTool Tapered Ball Nose Spiral Router Bit 1.0mm Tip Diameter (0.5mm Radius) 4.82 Deg for CNC Milling Engraver Carving Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 4.82Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Carbide Ball Nose Router Bit 2.0mm Diamter Tip (1.0mm Radius) Woodwork Metal CNC Engrave Carving Machine Tools 1/4 Shank TiAlN Coat

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 2.0mm tip diameter, 3.92Deg, TiAlN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

SpeTool Tungsten Carbide Tapered End Mill 1/4\ Shank 3\ OVL with 4.0mm Tips Diameter (2.0mm Radius) 2.2Deg for Woodworking Carving CNC Router Bits

  • Solid carbide spiral ball nose tapered router bit.
  • 2 flute, 1/4" shank, 1-1/4" cutting length, 4.0mm tip diameter, 2.2Deg, TiAIN coating, 55HRC.
  • Mostly used for 2D/3D engraving work, detail carving.
  • The cnc router bit suit for wood like Plywood, OAK, MDF, and metail like alloy copper, have long service life for sharp.
  • This route bit suit for CNC router and and any brand plunge router with 1/4" collet.
Check Stock

Stay Home [Explicit]

  • ...o that you can craft anything you like. Projects made with our M2 include benches, signs, lamps, tables, and even a guitar!.
  • FULL KIT: M2 is a 3-Axis wall-mounted CNC cutting machine and comes with laser-cut, steel and powder coated mounting brackets, lead screw z-axis, built-in dust collection port, three ⅛‘’ router bits that offer extremely precise cuts. The router is not included. Compatible routers include: DeWalt611, Bosch Colt, Makita RT0700CX and EU equivalents to each of the above..
  • OPEN-SOURCE SOFTWARE: The M2 is designed to be used with Makerverse open-source software which is included with your purchase. Makerverse is a GRBL CNC control application that has custom controls made specifically for all Maker Made products: the Maslow, M2 and 300x. The application is derived from the open source CNCjs project and will continue to receive new features and updates from the Maker Made team..
  • PRECISION: Maker Made M2 has a highly accurate cutting with a variance of just 1mm. Every piece is purpose-built for accurate, consistent cutting performance. The M2 cuts up to 40% faster than Maslow CNC, its motor is cooler and more efficient, the router bit is smaller for better accuracy..
  • TRIED AND TESTED PARTS MADE TO LAST: Designed and developed in....
Check Stock

CNC Spoilboard Surfacing Router Bits,1/4 inch Shank 1inch Cutting Diameter plus 1/2 inch Shank 2inch Cutting Diameter , Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Perfectly forSurfacing, Rabbeting, Flycutter, Leveler, Surface Planer(Carbide) 2 pieces

  • [Product Specification]4 WINGS WOOD CNC ROUTER BIT: Shank: 1/2″.
  • Cut Length: 1/2″ 3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
  • Cut Length: 1/4” .Gift 1/2″to1/4″ Router Collet 1pcs.
  • [High quality materials]heat resistant teflon coating,Industrial grade micro grain carbide tips,High-quality alloy steel bodies, cutters provide superior wear resistance and long life, with anti-kickback design.This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications..
  • [Application scene] Suitable for wood, MDF, particleboard, plywood,compact panels, laminate, acrylic and etc.it can easily cut the groove you want.Do not cut various metals and non-wood materials such as: steel, iron, sand, etc.This bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving.
  • [Perfect fit]Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc. Our slotting knives can easily fit most devices on the market, so you don’t need to worry about fit.Perfect choice of prof....
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock