ReviewsCng Compressors

EVANS Cooling Systems EC61001 Heavy Duty Waterless Engine Coolant, 128 fl. oz.

• Specially formulated for use in all heavy duty diesel, CNG, and LNG engines, in both stationary and vehicle applications Especially effective in severe-duty service such as vocational and off-road.
• Ready to use Requires no supplemental coolant additive (SCA) additions Contains no phosphates, silicates, borates, amines, or nitrite.
• Has a high boiling point of 375 Degree F and provides low temperature protection to -40F Will not vaporize, eliminating boilover and after-boil Generates low system pressures, prevents coolant loss, and reduces strain on cooling system components.
• Contains no water, effectively eliminating corrosion, wet-sleeve liner and water pump cavitation erosion Minimizes the potential for corrosion and electrolysis issues, and reduces maintenance costs.
• During installation ensure that all of old water-based coolant and water is removed before installing this product..
• Evans Heavy Duty Coolant contains a bittering agent/contains a bitterant.

Gast R5325A-2 Regenerative Blower, Three Phase; 133 cfm at 50 Hz, 160 cfm at 60 Hz

Regenerative Blower, 1.00 HP, 98 CFM

Sanden 508 Style AC Compressor Clutch, Serpentine Pulley, Natural Finish

• 8 Rib Serpentine Pulleys for Increased Grip and Performance.

Wagner Power Products 276124B HVLP Conversion Gun

• Paint spray gun for converting high-pressure compressors into HVLP fine-spray system.
• Works with compressors with at least 1-1/2 horsepower.
• Includes conversion gun (0276124) regulator valve, bleeder and non-bleeder connections, needle/nozzle fine-finish projector set, 1-quart cup.

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- Dual 200psi Compressor, 5 Gallon Tank. For Boat Lift,Towing,Lowering,Load Leveling,Onboard Train Horn VXX1208GW/4852DC

• POWERFUL AIR SUSPENSION KIT - This premium kit is designed to address high air demands of trucks and cars. It includes a 5-gallon tank with 9 ports, two 200 PSI compressors, high flow electric air valves, a dual gauge panel with 4-way switch control, and basic hardware for installation..
• ONBOARD AIR SYSTEM WITH INCREASED CAPACITY & SPEED - The two compressors double the tank's air intake for a faster refill. The large tank volume with efficient refill allows your system to react quickly to changes. This is a perfect solution for vehicles with mid to large-size air bags, assuring a super-fast rise time and smooth operation..
• HIGH FLOW ELECTRIC AIR VALVES - The 8 included high flow valves increase the airflow to and from the air bags, which improves the response time of your suspension system for outstanding performance..
• EXTRA VOLUME FOR HIGHER AIR NEEDS - This kit is recommended for vehicles that need high suspension for heavy load leveling and have the space for two compressors and a 5-gal tank. It can also serve all your other air needs like airing up tires, train horns and additional air tools..

1/4 Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors

• 1/4" Drain Cock Ball Valve 2 Pieces Set replacement for Air Compressors Drain Cock Ball Valve for Air Compressors One Quarter turn to fully open....
• 1/4" NPT Male Pipe Threads Fits: DeWalt & Porter Cable Craftsman , DeVilbiss , Emglo , Dewalt , Jenny , Rol-Air , J-Air , C/H and Many others. Large....

Gorilla Carts GCT-10NF Replacement Tire, 10" (2-pack)

• 10 in. no flat replacement tire for lawn and garden Carts, hand trucks, air compressors, pressure washers, hose reel and more.
• Long lasting, solid polyurethane design with a 300 lbs. capacity.
• Offset wheel hub with a hub length of 2.17 in.
• Compatible with lawn and garden carts, hand trucks, air compressors, pressure washers with 10 in. Wheels.

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

• REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
• GM R4 and A6, HR-6, DA-6 and V A/C compressors.
• sander compressors SD 505, 507, 575, 708, and 709.
• Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
• Check vehicle owner’s manual for a list of compatible compressors.
• EASY TO USE: Keep all threads clean and well-oiled.
• Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
• Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
• Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
• BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
• Resists rust and corrosion with proper care and lubrication.
• 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
• EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- Dual 200psi Compressor, 5 Gallon Tank. For Boat Lift,Towing,Lowering,Load Leveling,Onboard Train Horn VXX1209FW/4852DBF

• POWERFUL AIR SUSPENSION KIT - This premium kit is designed to address high air demands of trucks and cars. It includes a 5-gallon tank with 9 ports, two 200 PSI compressors, four 2600-style air bags, high flow electric air valves, water traps, a dual gauge panel with 4-way switch control, and basic hardware for installation..
• ONBOARD AIR SYSTEM WITH INCREASED CAPACITY & SPEED - The two compressors double the tank's air intake for a faster refill. The large tank volume with efficient refill ensures a super-fast rise time and a quick reaction to changes..
• UNIVERSAL AIR BAGS & HIGH FLOW VALVES - The springs allow a safe load capacity of 349-3055 lbs. The 8 included high flow electric air valves increase the airflow to and from the air bags, which improves the response time of your suspension system for outstanding performance..
• EXTRA VOLUME FOR HIGHER AIR NEEDS - This kit is recommended for vehicles that need high suspension for heavy load leveling and have the space for two compressors and a 5-gal tank. It can also serve all your other air needs like airing up tires, train horns and additional air tools..

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- Dual 200psi Compressor, 5 Gallon Tank. For Boat Lift,Towing,Lowering,Load Leveling,Onboard Train Horn VXX1208FB/4852DBF

• POWERFUL AIR SUSPENSION KIT - This premium kit is designed to address high air demands of trucks and cars. It includes a 5-gallon tank with 9 ports, two 200 PSI compressors, four 2600-style air bags, high flow electric air valves, water traps, a dual gauge panel with 4-way switch control, and basic hardware for installation..
• ONBOARD AIR SYSTEM WITH INCREASED CAPACITY & SPEED - The two compressors double the tank's air intake for a faster refill. The large tank volume with efficient refill ensures a super-fast rise time and a quick reaction to changes..
• UNIVERSAL AIR BAGS & HIGH FLOW VALVES - The springs allow a safe load capacity of 349-3055 lbs. The 8 included high flow electric air valves increase the airflow to and from the air bags, which improves the response time of your suspension system for outstanding performance..
• EXTRA VOLUME FOR HIGHER AIR NEEDS - This kit is recommended for vehicles that need high suspension for heavy load leveling and have the space for two compressors and a 5-gal tank. It can also serve all your other air needs like airing up tires, train horns and additional air tools..