ReviewsCng Cylinder Pipe tube

IEason,Men Stainless Steel Watch Analog Quartz Movement Wrist Watches Silver B

  • Insulated copper coil line set is made in USA..
  • The 16 Ft. line set is insulated high quality copper tubing. Seamless pure copper pipe shows no leaks, which is divided into 1/4" low and 1/2" high....
  • With embossed polyethyene film, climate resistant foam, and 3/8 inch thickened insulated cotton, this three-layer insulated mini split copper line set....
  • The insulated copper twin line set has been successfully tested by Method ASTM G154. No cracking at low temperature of -40 ° F, no deformation at....
  • Package Include: insulated line set*1, wall sleeve cylinder*1, decorative wall cap*1, wall filler putty*1, non-adhesive decorative wrapping tape*1,....
Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

  • EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
  • EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
  • EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
  • EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
  • EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

Senyar Exhaust Pipe Expander Tool Set, Tail Expander Kit 1‑1/18in to 3‑1/2in Steel Muffler Spreader with Storage Case

  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches. Thin-walled tube, versatile. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Please double check the part number of your item before you buy, matching information is for reference only..
  • 【Quality Steel Material】The exhaust muffler adopts a forged and heat-treated steel structure to improve strength and durability. This product includes three different expander sizes. It is used to extend the length of the pipe proportionally so that the pipe has the same diameter instead of a cone. Install the auto parts on the standard exhaust system..
  • 【Easy to Use】The pipe can be expanded with a simple wrench turning to repair and install the exhaust system. Simply choose the correct size expander for your pipe, insert it into the damaged pipe end, and turn the rotating rod of the expander until the dent is removed..
  • 【Prevent Loss】We provide a sturdy storage box, the terminal can be placed in any shelf or storage area after use, it can effectively prevent the loss of tools..
  • 【Suitable For】This tail pipe expander is suitable for all LCD monitors from 1-1/8 inches to 3-1/2 inches....
Check Stock

Loreso Mini Copper Pipe Tubing Cutter - Mini Tube Cutter for Copper Brass Aluminum, Thin Stainless Steel for 1/8 to 1 1/8 (3-28mm) OD Pipes)

  • MINI TUBING AND PIPE CUTTER – Manufactured with high-quality, heavy duty alloy steel, this tube cutter will efficiently cut copper, brass, aluminum and thin steel pipes. This pipe cutter provides a fast, economical way to do a clean cut..
  • VERSATILE PIPE CUTTER FOR ALL INDUSTRIES – This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops.
  • EASY TO OPERATE – Cut like a BOSS with Loreso manual pipe cutter, Rotate the knob to grip tube, Revolve tube cutter around the pipe, Tighten grip smoothly after each full circle until full cut..
  • VARIOUS TUBE CUTS – Cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8 to 1 1/8 Inch ( 3-28mm ) Outer Diameter OD..
  • STURDY ALUMINUM CAST FRAME – Tube Cutter body is made of light weight and durable Aluminum Casting, Blade is built using CNC machining with most durable and high quality Alloy Steel..
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Goss KX-3B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-3 and GA-11 Target Tips and Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes GA-5L EZE-Lite Tip Target Tip that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator for "B" Cylinder, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-5L soft solders up to 1-1/2-Inch and silver brazes up to 3/4-Inch.
Check Stock

ABN Exhaust Pipe Cutter Tool - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool Muffler Pipe Cutter

  • CUT PIPES EASILY: Quickly remove old exhaust pipes with the ABN Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness.
  • ACCESS HARD TO REACH AREAS: 10 inch (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts.
  • DURABLE CUTTING BLADES: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels.
  • EASY TO USE: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • COMFORTABLE GRIP: 9.3 inch (23.6cm) exhaust pipe cutting tool has 3.8 inch (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security.
Check Stock

Goss KX-5B Soldering Brazing Torch Kit for \B\ Acetylene Tanks with GA-5 Target Tip with Hot Turbine Flame

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-8 soft solders up to 2-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for MC acetylene cylinders.
Check Stock

Superior Tool 36878 ST-2000 Pipe Cutter-5/8 Inch to 2-1/8 Inch Pipe Cutter , Gray

  • Cuts up to 1” schedule 40 pipe and 2” copper tubing,.
  • Tubing capacity is 5/8" - 2-1/8" and 1" pipe..
  • Tubing cutter wheeled can be replaced with item # 42348.
  • Cuts and deburrs a wide variety of pipe and tubing..
Check Stock