ReviewsCo2 Gas Shielded Welder

CO2 Inflator Kit with 4 x16g CO2 Cartridges - Presta & Schrader Valve Compatible - CO2 Bike Pump for Road and Mountain Bikes

  • 【Get Back Riding Fast】: The CO2 Inflator Set (CO2 Cartridges x 4/ CO2 Inflator/ insulate sleeve) is a new standard of threaded CO2 Cartridge, perfect for whether your going on tough mountain range rides, or in need of fast air pressure during hot pursuit racing! With the 16g threaded cartridges, it can fill a large (26” x 1.95”) MTB tire to 40psi (2.7bar) in a single shot, now that’s impressive! Get yourself back on the trail quick and conveniently with the handy 16 gram threaded CO2 cartridge.
  • 【Super Compact and Lightweight】: CO2 Inflator fit Presta & Schrader valve, and CO2 cartridges are smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you'll more than likely find that your tire will be flat within 24 hours because CO2 will leak out of your tire faster than air. So don't forget to pump it up before your next ride.
  • 【Compatible for all Threaded CO2 Cartridges】: Inflator head designed for any size of threaded CO2 cartridges. Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to use the insulate sleeve(include) to ....
Check Stock

HITBOX MIG Welder 200A 110V/220V Dual Voltage Color Smart LCD Display IGBT Inverter Multifunction MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine MT2000Ⅱ

  • ★ DUAL VOLTAGE MULTIFUNCTIONAL WELDER - HITBOX MT2000Ⅱwelder is dual voltage 110V/220V, with MIG/ARC/LIFT TIG gas gasless multi Functions. It came with color LCD display with make the setting parameter very easy to read. It is super easy and convenient to chose the welding mode by pressing the “Selection” button. Once choosing the mode you need, the mode will light up with its matching color..
  • ★ MIG FUNCTION - HITBOX MT2000Ⅱ welder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld 1mm-8mm thickness workpiece. When adjust the current, the wire speed and output voltage will be auto matched. Little splash, deep bath and smooth wire feeding bring you beautiful welding seam. Solid wire with gas welding stainless steel. Flux-cored wire without gas welding iron and carbon steel..
  • ★LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a WP-17V tig torch will be needed. Please kindly note that WP-17V tig torch is not included in this package..
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little spatter, stable curren....
Check Stock

Hobart - 500553 Handler 210 MVP MIG Welder,Small

  • Your purchase includes One Hobart – 500553 Handler 210 MVP MIG Welder, One 10 ft. (3m) H100S4-10 gun, One 10 ft. (3m) work cable with clamp, Built-in gas solenoid value and dual-gauge regulator with gas hose.
  • Welder Dimensions: 10.62” W x 19.5” L x 12.37” H | Welder weight: 79 lbs. | Input Voltage: 110/115/120 V – 220/230/240 V | Material Thickness: 1/4” – 3/8”.
  • Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
  • Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.
  • Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up..
Check Stock

CXWXC 16g Threaded CO2 Cartridges for Bike Tires - Cartridge for CO2 Inflator with Threaded Connection, CO2 Pump for Road and Mountain Bikes (D: 12 Pack)

  • 【Get Back Riding Fast】: The CXWXC CO2 Cartridges are a new standard of threaded CO2 Cartridge, perfect for whether your going on tough mountain range rides, or in need of fast air pressure during hot pursuit racing! With the 16g threaded cartridges, it can fill a large (26” x 1.95”) MTB tire to 40psi (2.7bar) in a single shot, now that’s impressive! Get yourself back on the trail quick and conveniently with the handy 16 gram threaded CO2 cartridge.
  • 【Super Compact and Lightweight】: The CO2 cartridges are much smaller and lighter than a hand pump, easily fitting into a saddle bag or jersey pocket. The cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you'll more than likely find that your tire will be flat (or well on its way to being flat) within 24 hours because CO2 will leak out of your tire faster than air. So don't forget to pump it up before your next ride.
  • 【Compatible for all Threaded CO2 Inflators】: Our 3/8-24 sized threads are compatible with all threaded CO2 bike tire inflators. Note: Once the CO2 is released, the cartridge and inflator head will get extremely cold, so it pays to wear gloves or buy CO2 cartridges with protective sleeves to protect yo....
Check Stock

TIG Welder, Diversion 180, 120-240VAC

  • Price For: Each Series: Diversion 180 Aluminum – Material Thickness: 0.025″ to 3/16″ Mild Steel – Material Thickness: 0.030″ to 3/16″ Includes: 12.5ft. Torch with Backcap, Ceramic Gas Cup, 3/32in Collet and Collet Body, 2% Ceriated Tungsten, RFCS-RJ45 Remote Foot Control, 12ft. Work Lead With Clamp, Regulator/Flow Gauge with Hose Overall Width: 9.875″ Overall Height: 17″ Welder Duty Cycle: 35%.
  • Power Source Weight: 50 lb. Welder Min. Output Amps: 10 Features: Inverter-Based, AC/DC Power Source, Fan-On-Demand, Portable Uses Miller’s MVP(TM) Plug for Multi-Voltage Usage, Digital Display, Remote Amperage Foot Control Included Input Voltage: 120/240VAC Polarity: AC/DC Welded Material: Aluminum, Steel Welding Processes: TIG.
  • Application: Aerospace, Construction, Heavy Equipment Manufacturing, Infrastructure, Manufacturing, Railcar, Shipbuilding, Boat / Yacht, High Purity Processing Input (Amps): 11.3/16 Rated Output: 60A @ 12.4V/150A @ 16V Welder Input Phase: 1 Welder Input Hz: 50/60 Item: TIG Welder Overall Depth: 23.875″ Welder Industrial Class: Light Welder Max. Output Amps: 180 Country of Origin (subject to change): United States.
Check Stock

ZENY MIG130 Gas-Less Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask AC Current 60 AMP – Commercial Grade – 110 V

  • 【Solid Construction】– ZENY MIG 130 welding machine is compact and exquisite MIG welder is constructed of high-quality durable steel, fully painted body can withstand rust and wear, a strong and durable welding machine for your long-term use.
  • 【Flux-Cored Wire, Gas Less Welder】– This welder machine uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. Automatic Thermal Safety Protection, Ideal for welding mild steel, stainless steel..
  • 【 Adjustable Feeding Speed】– ZENY MIG welder features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. It also features a wire feeding speed adjust rotary knob, 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • 【Widely Applications】– It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specifications for This Welder】– Frequency : 50/60HZ/ Max absorbed power (KVA): 3.6/ Absorbed power 60% (KVA): 1.1, Power factor:0.9, Flux wire diameter (MM): 0.8-0.9, Max Open Voltage: 37V/ Current range (A):50-90.
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • ...o Use - MIG welding is easy to do with the MIG180. With the welding machine being wire feed, most people find it easier to use than other welding methods. The MIG180 allows you to create excellent, intricate welding designs..
  • Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
  • Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the....
Check Stock

LED CO2 Cannon Gun Handheld RGB DJ Jet Effect Fogger Smoke Gun CO2 Fog Machine for Party Halloween Stage Nightclub Concert Live Party US Stock

  • ★EASY TO USE AND ADJUSTABLE COLORS - LED CO2 Gun, RGB Mixed, can be adjusted according to the different colors, Easy to carry on and operate, are....
  • ★SIMPLE EQUIPMENT - This CO2 Gun-LED don't need DMX 512 controller like other CO2 Machines, only need 1 gun+Hose+tank. one CO2 tank is needed per....
  • ★COLOR CHANGES - This LED CO2 PARTY GUN has a color changing tube which changes from red, green and blue while is shooting out the CO2 Gas Party....
  • ★PRODUCT ADVANTAGE - Perfect appearance and technical design.
  • Gas spray distance can be 6-8M /19.7-26.2 ft.
  • ★SERVICE GUARANTEE - Our products are shipped from the US warehouse, and we will ship your order through UPS/USPS and other logistics as soon as....
Check Stock

SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

  • EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly..
  • PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines..
  • VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types..
  • HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure..
  • WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!.
Check Stock

Weldpro Omni 210 Dual Voltage 115V/230V AC/DC Multi-Process Welder - MIG/Flux Core/Stick/ACDC High Frequency TIG with Pulser and Aluminum Balance/Frequency Control 3 year warranty welding machine

  • Weldpro’s new 200 Amp Multiprocess welder now includes AC/DC TIG Welding with Hi Frequency Start and Pulse Control.MIG/Stick/ AC&DC TIG/ Flux Core/ Aluminum Spool Gun all new design with FOOTPEDAL and TRIGGER SWITCH..
  • Dual Gas inputs for dedicated Argon and MIX/CO2 tanks. MIG gun and TIG torch can be connected simultaneously for ease of switching between MIG and TIG.All new easy to use, multifunction data display and controls that make changing welding processes and parameters simple even for beginners..
  • 200A Welding Current across ALL PROCESSES allows welding of various thickness material and different types of base material..
  • Included VRD feature with Hi Temp and Overload protection with indicator. User adjustable inductance.Operates off 115V/230V standard household current.
  • What’s Included: 10ft NT1 MIG gun, 12ft CK 17-12-RSF Flex head TIG torch, 5AWG 10ft 200A electrode holder, 5AWG 10ft 300A T-shape earth clamp CGA 580 gas flow meter with 4.5ft gas hose, Power adapter, 0.030’’-0.035’’ knurled drive roll, 0.024’’-0.035’’V-Groove drive roll, AK-3 accessory kit, Weldpro CK17 torch protection cover, Trigger button for TIG torch, Weldpro SSC control foot pedal.
Check Stock

Mini Keg Beer Dispenser,ProMaker Stainless Steel Mini Keg Beer Growler Spear Tap Dispenser for Craft Beer Grow Homebrew Spear 2L / 3.6L / 4L / 5L / 10L (Keg Dispenser)

  • ◆ High Quality : All constructed from stainless steel for sleek design and maximum strength,perfect polished finish make it looks great also and last long time.
  • ◆ Ideal Brewing Tool :Mini keg dispenser can carbonate your homebrew inside your mini-keg,keep your beer fresh, delicious and tasty,No more broken glass, lost caps, or flat beer.
  • ◆ Build Winemaking Systerm :Allows for use of your existing keg dispensing and CO2 equipment with your mini keg.
  • Features a gas ball lock connection and one bar-style beer faucet connection to allow for use of standard CO2 equipment,Double Wall Quick Connector Spear and a pressure relief valve,requires Mini-keg,CO2 regulator, CO2 cartridge and gas line assembly.
  • ◆ Easy to Use : Dispenser includes 2 posts and 1 ball lock.
  • Connect the top (straight up) post to liquid line, angled post to gas,Fits 2L/3.6L/4L/5L/10L mini-keg growler and most other mini-kegs on Amazon that feature inner threaded caps..
  • ◆ Please Note :We would recommend you use the escaped gas from the beer to start your first pour and not add Co2 as there is less headspace in a full growler. When the pour slows add Co2 while pouring If using the Co2 cylinders.
Check Stock