ReviewsCoarse Thread Hex Bolts

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
Ideal for restoring the stripped threads on old, rusty nuts and bolts.
Hex shape makes taps and dies easy to turn with any socket or wrench.
Can be used on national coarse, national fine and metric nuts and bolts.
Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.

Check Stock

1/4-20 x 2-1/2\ (1/2\ to 6\ Length Available) Hex Head Bolts Screws, 304 Stainless Steel 18-8, Fully Threaded, Hexagon Head Cap Bolts Screws, Coarse Thread UNC, Pack of 8

Screw Length: 2-1/2 inch or 63mm (measured excluding the head height).
Width Across the Flat Head: 0.438 inch (11.1mm).
Strong enough for indoor and outdoor projects. Hex bolts generally requires washers and nuts to distribute the pressure, as well as preventing pull through. Eastlo provides stainless steel nuts and washers seperately or in sets with good quality and reasonable price..
Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.

Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

...nd 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Versatile Applications: the fairy stake rods are your ideal tool ....

Check Stock

M6 Hex Nuts with Anti-Vibration Nylon Lock Inserts (50 Pcs, Diameter 6mm x 10mm, Black) Self Threading Carbon Steel with Zinc Coating Rust Protection. Universal Design Appliances, Furniture and More

Nut Width (from point to point): 0.65 inch.
Specification Standard Meets ASME B18.2.2.
Made of 304 stainless steel (no coating outside) 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Commonly used in conjunction with bolts or screws to provide secure fastenings into unthreaded holes. You could find the matched bolts, flat washers and lock washers seperately in our store..

Check Stock

3/8' X 5' Stainless Hex Lag Bolt Screws, (10 Pack) 304 (18-8) Stainless Steel, by Bolt Dropper

【High Quality Stainless】No More Rust Stains! These Stainless Steel Lag Screws are 100% 304 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today. Deep cut, coarse threads for superior holding and prevent stripping in the material..
【Bolts That You Can Depend On】Our hardware is very strong and is great for both indoor and outdoor use. The 18-8 Stainless Steel is superior to regular steel and provides excellent rust resistance in both fresh and saltwater applications..
【Dimensions】Diameter: 3/8" | Length: 5" | Thread Type: Coarse (standard) | Quantity: 10 pcs | Material: 18-8 (304) Stainless Steel..
【Great To Keep Around】Bolt Dropper hardware is great to have around for use in wood and wet environments. Bolt Dropper Hex bolts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant and will support all of your projects..
【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..

Check Stock

1/4 X 1-1/2 Stainless Hex Lag Bolt Screws 25 Pack 304 18-8 Stainless Steel by Bolt Dropper

【High Quality Stainless】No More Rust Stains! These Stainless Steel Lag Screws are 100% 304 Stainless Steel which is one of the highest forms of....
【Bolts That You Can Depend On】Our hardware is very strong and is great for both indoor and outdoor use. The 18-8 Stainless Steel is superior to....
【Dimensions】Diameter: 1/4" | Length: 1-1/2" | Thread Type: Coarse (standard) | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
【Great To Keep Around】Bolt Dropper hardware is great to have around for use in wood and wet environments. Bolt Dropper Hex bolts are the highest....
【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..

Check Stock

KLMHT Replaces Trailer Axle Dust Cap Cup Grease Cover & with Rubber Plugs RV Camper Utility 1.98\(2 Pack)

Dome Head Torx barrel truss nut 5/16" x .625"L (coarse thread) Zinc plated steel.
Head diameter (1.00") Barrel length from inside of flange 5/8" (.625") long.
Open ended, bolt will pass thru, No bolts included.
Use on Cambar cargo trailer Rear & side door Latches.

Check Stock

3760 Piece Bolt Bin Kit Grade 8 Nut Bolt Washer Assortment, Hex Head Cap Screws, Flat and Lock Washers 40 Hole Bin

40 HOLE COLD ROLLED STEEL BOLT BIn (SHIPS DIRECTLY FROM SUPPLIER) NORMALLY 2 DAYS AFTER PURCHASE.
3059 PIECES OF GRADE 8 USS COARSE THREAD HARDWARE.
1/4" - 1/2" BOLTS, HEX NUTS, FLAT WASHERS, AND LOCK WASHERS.

Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

...Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow..
Purchase Notes:Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..

Check Stock

M&M Fasteners 2,510 Piece Grade 8 Coarse Thread Nut Bolt Hex Bolt & Washer Assortment Kit (Fasteners Only)

2,510 pieces of Grade 8 coarse thread zinc yellow hex bolts, lock washers, sae flat washers and hex nuts..
VARIETY: This assortment includes the perfect amount of fasteners to keep around for whenever that special project calls. Sizes included are 1/4, 5/16, 3/8, 7/16 & 1/2.
VALUE: You are buying 2,510 pieces at a price that is hard to beat by our competitors. Get the most for your money without sacrificing quality..
QUALITY: With over 25 years in the industry, we offer the highest quality of fasteners at great prices. Customer service is our top priority and we strive to continue to grow our business to serve you for years to come..

Check Stock

binifiMux 6-Pack Motorcycle Battery Terminal M6 x16mm Bolt Square Nut Kit Stainless Steel 304

【】Square Nut Size: 8 x 11 x 4mm( Width x Length x Thickness).
【】Nut Material: Carbon Steel with Zinc Plated.
【】Package: 6pcs x ( M6 Bolts + M6 Flat Washers + M6 Flat Washers + M6 Square Nuts).
【】Application: fasten Motorcycle Battery Terminal and other household DIY projects..

Check Stock