ReviewsCoated Ceramic Tile

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Microblend Interior Paint and Primer - Blue/Azuresque, Satin Sheen, Quart, Premium Quality, High Hide, Low VOC, Washable, Microblend Cabo Collection

  • Premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals..
  • Use on Drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces..
  • Bonds to "hard-to-coat" surfaces and can be top coated with almost any product.
  • Apply when air and surface temperatures are above 35 °F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact.
  • Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer. Set of 2..
Check Stock

JINGLING 6mm 1/4\ inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs

  • Hole/Outer Diameter: 6mm (close to 1/4").
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

QEP 6-1008BW Black Widow 10\ Wet Tile Saw Micro-Segmented Diamond Blade for Porcelain, Marble, Granite & Ceramic Tile, 5/8\ Arbor, Wet Cutting, 6115 Maximum Rpm

  • Porcelain certified diamond blade cuts porcelain, marble, granite and ceramic tile.
  • High quality steel with 7 mm, diamond-coated high-rim for less chipping and a cleaner cut.
  • 5/8 in. Arbor fits most brands of wet tile saws.
  • Micro segments help cool the blade and prevent wobbling and chipping.
  • Ideal for high speed cutting of Hard masonry tile.
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Rust-Oleum 365930 Floor Coating Base Coat Black Quart

  • Home base coat requires the use of Rust-Oleum home top coat in a semi-gloss or matte finish (Sold separately).
  • For interior use on any bare, stained, sealed or previously coated surfaces such as ceramic tile, porcelain tile, concrete, hard wood, laminate, vinyl and linoleum.
  • Water-Based formula that requires no stripping, sanding or priming.
  • Apply Rust-Oleum home base coat, wait 6 hours, then apply Rust-Oleum home top coat, allow 24 hours following top coat application before walking on floor.
  • Remove caulk and wax from floor before applying coating for best results.
Check Stock

Bostik Blaze Urethane Haze & General Cleaner

  • REFINISH YOUR BATHROOM: Give your sink, tub or tile a fresh, long-lasting finish. Magic Spray-On Tub & Tile Refinishing Kit works great on ceramic, porcelain, fiberglass, enamel-coated cast iron and acrylic tile, tubs or sinks..
  • HIGH PERFORMANCE: Our one-part epoxy is specially formulated to stand up to moisture and make your fixtures look fantastic. Please note that this does carry a strong odor. We recommend wearing a mask and making sure the area is well ventilated..
  • COMPLETE INSTRUCTIONS: Let's be real. Refinishing your bathtub is a lot of work, but we think it's worth it in the long run. We'll give you a step-by-step guide that covers surface prep to final coats and clean-up. We'll even remind you to use a TSP cleaner and cover anything you don't want misted..
  • SAVE MONEY: Refinishing your bathroom can get costly quick. Magic Spray-On Tub & Tile Refinishing Kit is here to slash costs so you can make your bathroom look amazing without breaking the bank on new fixtures or a contractor..
  • COAT COVERAGE: This product provides two coats to an average size bathtub. It covers roughly 22 square feet..
Check Stock

JINGLING 3 mm 1/8' inch Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter Tools for Glass Marble Tile Granite Stone Pack of 20Pcs

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

MagicEzy Tile RepairEzy (Honey Beige) Ceramic Tile Repair Kit - Cracked Chipped Bathroom Floor Tiles

  • Versatile Ceramic Tile Repair Kit – it’s not only great for porcelain tile repair, also use it for granite countertop repair, ceramic sink repair, to fix acrylic bathtub damage , fiberglass shower, porcelain dinnerware..
  • Virtually Invisible Crack Repair For Most Tile Damage - fix tile cracks, chipped tiles, tile holes, pitted granite – you name it. It’s also a tile scratch remover and hides vinyl floor scratches. Or use it as a wall touch up paint for gouges Use it on cracks up to 1mm. For deep damage use our Deep Chip Filler. Scroll down for more information..
  • Tile Repairs that Last with Lifetime Durability - It's as glossy as porcelain tile paint touch up but with the strength of a super epoxy tile gap filler.
  • Revolutionary nanotechnology for structural grade adhesion and Lifetime Durability Protection..
  • Fix Cracked Tiles, Chipped Ceramic in 4 Easy Steps – Our super tile fixer makes it easy for you to fix damage fast. Just clean, squirt, wipe and level. It’s a filler, sealant, and colorant so there’s no need to mix. Dries with a glossy finish – adjustable to matte..
  • Tile Repair Kit for Perfect Color Match - Buy a single ceramic repair filler tube or mix putty colors together in a Tile Repair Kit. Match any color - white, off white, beig....
Check Stock

The gloss brush on sealer for nonfired acrylics 2oz glaze

  • 511 Porcelain & Ceramic Tile Sealer is an impregnating sealer designed for the protection of all porcelain and ceramic tile surfaces..
  • 511 Porcelain & Ceramic Tile Sealer forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape..
  • 511 Porcelain & Ceramic Tile Sealer is not a surface coating and will not alter the natural look..
Check Stock

MagicEzy Tile RepairEzy - (Light Gray) Touch Up Paint Filler for Bathroom Tiles, Appliance, Furniture, Walls, Counter Tops - Glossy Finish

  • SUPER STRONG AND DURABLE, COLORED PORCELAIN TILE REPAIR FILLER: for long-lasting broken tile crack repair. Lifetime Durability Protection. It's a tile touch up paint mixed with a super strong tile filler so it's like a paint touch up pen but with the thickness and adhesion of a tile putty..
  • PERFECT COLOR MATCH: Mix and match any color porcelain tile.
  • blend colors using one of our porcelain tile repair kits. 23 variations...
  • HIGHLY VERSATILE CERAMIC TILE REPAIR KIT - Repair broken tiles and most surfaces including porcelain and ceramic tiles, bathtubs, acrylic, fiberglass and stone..
  • MULTIPLE USES: Use it on your bathroom floor tiles, kitchen countertops, bathtubs, sinks, toilets, fiberglass shower tray or virtually any hard surface..
  • Glossy glaze finish so it's great for shiny ceramic tile repair, acrylic tub repair, or as a porcelain crack filler as it has the shine of a ceramic glaze. For semi-gloss surfaces you can easily adjust the gloss levels..
Check Stock