ReviewsCoating Flange

iPower GLFANXEXPSET4D25CHUMD 4 Inch 118 CFM Inline Filter 25 Feet Ducting with Fan Speed Controller and Temperature Humidity Monitor and Grow Tent Ventilation, Black

  • 4 Inch 150 CFM Duct Inline Fan Blower: Composite fan blades and center hub which reduces noise and vibration..
  • 4 Inch Filter: Dimensions: 4" Flange Ducting x 12" Length.
  • Reversible flange. Free Pre-Filter included: We recommend replace the Pre-Filter every 6 months to protect your filter..
  • 4 Inch 25 Feet Uninsulated Aluminum Ducting + 2 Stainless Clamps: Flame-retardant coating and corrosion-resistant wire helix.
  • Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)..
  • Fan Speed Controller: Variable Speed, Off, High, MED, Low. To avoid the risk of burning out the fan motor, controller does not adjust below 50%. Free Pre-Filter included: We recommend replace the Pre-Filter every 6 months to protect your filter..
  • Multifunctional: This ventilation combo removes heat and eliminate the undesirable ill-smelling odors in the grow tent to solves air delivery problems without major system rework or expense..
Check Stock

Nenesupply 19mm Flange Insert Compatible with Elvie Flange Pump Parts Elvie Stride Flange Medela Spectra Momcozy Flange Willow Reduce 24mm to 19mm Use as Elvie Inserts Medela Insert Momcozy Insert

  • CONTENT: 2pc 19mm NENESUPPLY Silicone Flange Inserts compatible with 24mm of Elvie flange, Elvie Stride flange, Momcozy flange, Medela flange (Personalfit Flex and Freestyle Hands-Free), Spectra flange, Willow flange, Willow Go flange, and Motif Luna flange. Reduce 24mm to 19mm. MADE BY NENESUPPLY. Compatible with Elvie pump parts accessories and Willow pump parts..
  • COMPATIBLE PUMPS: Work with 24mm FLANGES of most breast pumps in the market. See product photo for illustrations..
  • AVAILABLE IN 15, 17, 19, 21mm. MADE FROM SOFT SILICONE: Soft silicone makes pumping more comfortable. Reduce flange funnel to 19mm. Suitable for moms with smaller nipples. Correct flange sizes make pumping more efficient..
  • NO LOSS OF SUCTION- Embeded sealing circles creates a complete seal. EASY TO INSTALL & REMOVE - Easy to push in and pull out the inserts. Hassle-free.
  • EASY TO CLEAN: Dishwasher safe (top rack only). BPA and DEHP Free. FDA compliant for food contacts. Made by FDA regulation compliant manufacturer..
Check Stock

iPower GLFANXEXPSET6D25CHUMD 6 Inch 294 CFM Inline Filter 25 Feet Ducting with Fan Speed Controller and Temperature Humidity Monitor and Grow Tent Ventilation, Kits, Black

  • 6 Inch 350 CFM Duct Inline Fan Blower: Composite fan blades and center hub which reduces noise and vibration.
  • 6 Inch Filter: Dimensions: 6 inches Flange Ducting x 16 inches Length, Reversible flange. Free Pre-Filter included: We recommend replace the Pre-Filter every 6 months to protect your filter.
  • 6 Inch 25 Feet Uninsulated Aluminum Ducting plus 2 Stainless Clamps: Flame-retardant coating and corrosion-resistant wire helix, Temperature endurance range from 0 to 185°F. (-18℃ to 85℃).
  • Fan Speed Controller: Variable Speed, OFF, HIGH, MED, LOW. To avoid the risk of burning out the fan motor, controller does NOT adjust below 50%. We recommend replace the Pre-Filter every 6 months to protect your filter.
  • Multi-functional: this ventilation combo removes heat and eliminate the undesirable ill-smelling odors in the grow tent to solves air delivery problems without major system rework or expense.
Check Stock

iPower GLFANXEXPSET6D8CHUMD 6 Inch 294 CFM Inline Filter 8 Feet Ducting with Fan Speed Controller and Temperature Humidity Monitor and Grow Tent Ventilation, Black

  • 6 Inch 294 CFM Duct Inline Fan Blower: Composite fan blades and center hub which reduces noise and vibration..
  • 6 Inch Filter: Dimensions: 6" Flange Ducting x 16" Length.
  • Reversible flange. FREE Pre-Filter included: We recommend replace the Pre-Filter every 6 months to protect your filter..
  • 6 Inch 8 Feet Uninsulated Aluminum Ducting + 2 Stainless Clamps: Flame-retardant coating and corrosion-resistant wire helix.
  • Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃)..
  • Fan Speed Controller: Variable Speed, OFF, HIGH, MED, LOW. To avoid the risk of burning out the fan motor, controller does NOT adjust below 50%. FREE Pre-Filter included: We recommend replace the Pre-Filter every 6 months to protect your filter..
  • Multi-functional: this ventilation combo removes heat and eliminate the undesirable ill-smelling odors in the grow tent to solves air delivery problems without major system rework or expense..
Check Stock

ECCPP 513121 Wheel Bearing Hub Front Wheel Hub and Bearing Assembly Allure, Aurora, Bonnevile, Century, Impala 5 Lug W/ABS

  • ...ies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
Check Stock

bliblo Flange Insert 19mm Suitable for Momcozy S9/S10/S12,Wearable Breast Pump Shield/Flange Insert，Milk Collector 24mm Universal (19mm)

  • Bliblo Flange Insert 19mm, wearable breast pump flange suitable for almost any wearable breast pump, for example S9/S10/S12 breast pump. Milk Collector 24mm common use. 3 Piece Set.
  • Easy Cleaning, wash the accessories with warm soapy water everytime after using..
  • Flange Insert 19mm：made of food grade silicone material. Can be sanitized with water steam, boiling water or microwave-steam bags. Furthermore, flange Insert are 100% BPA free..
  • Mothers will experience nipples swelling during breastfeeding, therefore nipples might be uncomfortable. Nipples Rubbing or feeling flattened in the flange tunnel, or oversize flange will cause the amount of breast milk falls. Therefore, it is important to observe the appearance of the nipples during breastfeeding. Suitable flange inserts for breast pumping will be more comfortable and efficient. Please choose a flange with a suitable size..
Check Stock

acylph Exhaust Oval Flange QuickFix Repair Pipe Kit w/Gasket & Hardware Universal 2.25" ID 2 Bolts

  • Designed to replace both sides of the flange connection.
  • This exhaust flange for high quality and accurate assembly for all your custom exhaust needs..
  • Application: Universal fit application for mostly any car..
Check Stock

ECCPP Front Wheel Hub Bearing Assembly 5 Lugs w/ABS for 08 09 10 11 12 13 14 Dodge Avenger Caliber Compatible with 513263 HA590219 Driver and Passenger Side

  • WHEEL HUBS PARAMETER - OE 513263, 5 lugs, Front Axle,ABS System,Flange Diameter: 5.562 In.,Bolt Size: M12x1.5,Flange Offset: 1.916 In..
  • VEHICLE COMPATIBLE - Hub assembly fits for 2011-2014 200, 2007-2010 Sebring, 2008-2014 Dodge Avenger, 2009 Dodge Caliber.
  • MAIN FUNCTION - hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. high quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE & WARRANTY - 1 year limited warranty, support replace, return and refund service.
Check Stock

2 Pack Metal Pipe & Brown Wood Wall-Mounted Hat & Wig Holder Motorcycle Accessories Helmet Holder Jacket Hanger Wall Mounted Multifunctional Rack Black

  • [Industrial style] The multifunctional bracket is designed in an industrial style, giving people a shocking feeling. It is very suitable for fixing....
  • [Sturdy] It is made of sturdy flange and thick steel pipe, and the galvanized steel bracket is extremely sturdy. The wall-mounted installation method....
  • [High-quality surface coating] The matte color coating bracket can resist rust, daily fingerprints and water stains, providing a unique appearance,....
  • [Easy installation] No professional installation procedure is required. It can be easily installed on the wall surface with appropriate mounting....
  • [After-sales service] - We offer 24-hour customer service,please contact us directly if you have any problems. We are always here and it's our great....
Check Stock

3/8-16 Serrated Flange Hex Lock Nuts, Stainless Steel 18-8 (304), Bright Finish, 25 PCS

  • Flanged base eliminates the need for a washer when fastening components.
  • Self-locking serrated flange digs into the material being fastened to help prevent loosening.
  • Hex body has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut.
  • 18-8 stainless steel provides good corrosion resistance and strength, while plain surface has no finish or coating.
Check Stock

Twin Turbo Headers Chevy Camaro TransAm Firebird 350 305 TT SBC GM Manifolds T3

  • Fit F/A/G/B/X-body cars and 88-98 Chevy/GMC trucks & SUVs.
  • Convert a 265-400 small block V8 engine to single turbo setup.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16-inch (11.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting.
Check Stock