ReviewsCobalt Blend

BOCCS Tattoo Kit Standard with 3/4In Digits and Numbers, Tattoo Pliers, Nitrile Gloves, and Ink for Identification of Sheep, Pigs, Goats, Cattle Livestock (0-9 & A-Z, Black)

  • Essential Bioavailable Trace Minerals for the Most Prized Animals in Your Care.
  • A Prize Blend of Organic, Essential Trace Minerals Developed to Improve Livestock Nutrition.
  • Benefits: Health and Wellbeing, Skin and Coat, Hoof Health, Digestive Support, Reproductive Performance, Bone and Joint Health.
  • One (1) 35-Ounce Pouch of Top-dress Trace Mineral Blend Including: Zinc, Manganese, Copper and Cobalt.
  • Formulated for: Beef/Dairy Cattle, Deer/Elk, Goats (Warning: Contains copper, do not feed to sheep).
Check Stock

TEMO M35 Cobalt Spiral Flute Step Drill 12 Size From 3/16 Inch To 7/8 Inch 1/4 Inch Hex Shank

  • M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm).
  • 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use..
  • double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

Radha Beauty Rest & Relax Essential Oil Blend 10ml. Calm The Mind, Body, and Spirit with Relaxation and Tranquility

  • PERFECT INFUSION OF RELAXATION - Calm the mind, body, and spirit with our special Lavender, Marjoram, Copaiba Balsam, Roman Chamomile and Clary Sage 10ml blend. 100% natural and cruelty-free..
  • MULTIPURPOSE DIY - Great for aromatherapy, massage, skincare, diffusers, homemade blends, bath bombs, laundry, repellent sprays, and use in homes, offices, and gardens..
  • AROMATHERAPY - It is ideal for relieving fatigue and calming the mind. Bring relaxation, wellness, and a sense of satisfaction to your day!.
  • Calm the mind, body, and spirit with a perfect infusion of relaxation and tranquility with this combination blend. Essential Oil Notes: Lavender, Marjoram, Copaiba Balsam, Roman Chamomile, Rosemary, Peppermint, and Clary Sage.
  • Look for our beautiful cobalt blue bottle to ensure you are getting an authentic Radha Beauty product..
Check Stock

5mm Cobalt Drill Bit Set, M35 Twist HSS Drill Bits Straight Shank, 5mm High Speed Steel Drill Bits for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【10PCS 5mm Cobalt Drill Bits】10pcs -(Dia 5mm) x (Length 86mm) metal drill bits. This drill fits most power drills on the market today and comes with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed ​​Steel】Made of M35 Cobalt Steel, Cobalt is added to form a hardened alloy, measuring Rockwell hardness up to 67, faster cutting speed, longer service life, up to twelve times more drill bits compared to ordinary high speed steel. HSS bit set, harder than the 4241 HSS used in other similar bit sets. These bits also contain 5% cobalt for improved wear resistance and durability..
  • 【Full Grinding Process and 135° Split Point】Fully ground helical flute design removes particles quickly, reducing friction and heat for faster, cooler drilling performance. The 135° straight shank split point prevents walking, making drilling more precise and faster..
  • 【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
  • 【Quality Service】If you have any questions about ....
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock

Cleartone Heavy Series Electric Guitar Strings (13-70)

  • Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
  • Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
  • Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
  • Engineered to maximize output and clarity.
  • Made in California, USA with the finest and freshest materials.
Check Stock

Ernie Ball 2225 Extra Slinky 8-38 (6 Pack Bundle)

  • Cobalt produces a stronger magnetic relationship between pickups and strings than any other alloy previously available.
  • Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
  • Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
  • Engineered to maximize output and clarity.
  • Made in California, USA with the finest and freshest materials.
Check Stock