ReviewsCobalt Plate

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching..
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc..
Check Stock

Hex Shank Cobalt Metric Drill Bit Set 15 PCS (1.5mm-8mm), Quick Change High Speed Steel Impact Driver Hex Drill bits for Metal, Steel, Wood, Plastic, Aluminum Alloy

  • 【Specification】13 cobalt hexagonal shank bits, including 1.5, 2.0, 2.5, 3.0, 3.2, 3.5, 4.0, 4.5, 4.8, 5.0, 5.5, 6.0, 6.5 mm, with 1/4 hexagonal shank..
  • 【Advantages】The hexagonal handle specially made for quick replacement of drill bits is an upgraded version. Compared with the ordinary hexagonal handle, it shows excellent performance, prevents the drill bit from peeling off the hexagonal handle, and effectively keeps the hexagonal handle locked during impact drilling. Cobalt drill bit is more durable than titanium drill bit..
  • 【Complete grinding process and 135 ° points】 The fully ground spiral groove blowdown waste quickly reduces friction and heat, thus providing faster, cooler and more efficient drilling performance.
  • 135 ° split point with straight handle can prevent slipping and make drilling stable and accurate. No center punch is required..
  • 【Quick replacement】 1/4-inch (about 0.6cm) hexagonal handle base is suitable for most pistol drilling and drilling presses, which is easier and safer to install without slipping and falling off..
Check Stock

Freud LU79R006M20 160mm x 48T Thin Kerf Ultimate Plywood & Melamine Blade

  • Freud's TiCo carbide blade is designed using titanium carbide, cobalt and tungsten.
  • High alternative top bevel tooth design produces smooth, splinter-free cuts.
  • Laser-cut anti-vibration slots reduce vibration and sideways movement, resulting in a smooth finish and extended blade life.
  • Perma-shield nonstick coating reduces drag, corrosion and pitch build-up.
Check Stock

Ernie Ball Regular Slinky Cobalt Electric Guitar Strings 3-pack 10-46 Gauge P03721

  • 3 individual sets of Regular Slinky Cobalt electric guitar strings.
  • Cobalt produces a stronger magnetic relationship between pickups and strings, resulting in increased output.
  • Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
  • Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
  • Made in California, USA with the finest and freshest materials.
Check Stock

Viking Drill and Tool by Norseman 69280 Type 240-D 135 Degree Split Point Cobalt Jobber Gold Finish Drill Set (115 Piece)

  • 115 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
  • 135-Degree split point for accurate centering and fast penetration.
  • Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.
Check Stock

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (30 Pieces,1/8 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is reliable and practical, with a long service use, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135 degrees split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the nice twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is nicely suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains many cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drilling.
Check Stock

Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic (15 Pieces,1/16 Inch)

  • Quality material: the cobalt drill bit set uses cobalt M35 high speed steel as material, this material is durable, strong and practical, with a long service life, heat and abrasion resistance.
  • The cutting edge of drill bit is hardened and honed, with accurate cutting without shaking.
  • Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability.
  • They can avoid walking during work process, while clearing chips and particles more quickly and easily.
  • Nice features: the 1/16 inch twist drill bits have precise diameter.
  • M35 cobalt drill bits for hardened metal are not easy to break or wear out, so suitable for lithium electric drill, hand electric drill, impact electric drill, etc..
  • The size is small, please pay attention to use.
  • Various fitness: M35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, such as cast iron, high temperature alloy, hard plastics, stainless steel, titanium alloy, woods, etc., also for soft materials.
  • What you will get: the package contains 15 pieces 1/16 inch cobalt drill bits, sufficient quantity to meet your various needs.
  • Please pay attention to speed, pressure and heat control during drill....
Check Stock

TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch To 3/4 Inch, 3/8 Inch Shank

  • TEMO M35 Cobalt Spiral Flute Type Step Drill, 9 Size from 1/4 Inch (6.4 mm) To 3/4 Inch (19 mm), 3/8 Inch (9.5mm) Shank.
  • 9 hole sizes: 1/4″ (6.35mm), 5/16″ (7.94mm), 3/8″ (9.52mm), 7/16″ (11.11mm), 1/2″ (12.7mm), 9/16″ (14.29mm), 5/8″ (15.88mm), 11/16″ (17.46mm), 3/4″ (19.05mm), with 1/16″ (1.59mm) increments. 3/8 Inch Shank with 3 flats to eliminate slipping.
  • Double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock

MOSTPLUS Front Complete Strut Spring Coil Springs Shock Absorber Compatible for 2005-2010 Chevrolet Cobalt 172179R 172179L(Set of 2)

  • Compatible for 2005 Chevrolet Cobalt BASE MODEL-LS-L, Compatible for 2010 Chevrolet Cobalt BASE MODEL-LS-LT-LT TEAM CANADA, Compatible for 2009 Chevrolet Cobalt LS-LT, Compatible for 2006-2007 Chevrolet Cobalt LS-LT-LTZ (Detailed Application Below).
  • Replace Complete Strut Assembly NO#: 172179R 172179L.
  • Includes 1 pairs of Front Complete Strut Assembly which Equipted with Strut, Soil, Spring and Mounts.
  • Guaranteed Exact Fit for easy installation.
  • Please check your car information before purchase..
Check Stock

TEMO M35 Cobalt Spiral Flute Step Drill 12 Size From 3/16 Inch To 7/8 Inch 1/4 Inch Hex Shank

  • M35 cobalt step drill 1/4" (6.35mm) hex shank 12 hole 3/16" (4.76mm) to 7/8" (22.22mm).
  • 12 hole sizes: 3/16" (4.76mm), 1/4" (6.35mm), 5/16" (7.94mm), 3/8" (9.52mm), 7/16" (11.11mm), 1/2" (12.7mm), 9/16" (14.29mm), 5/8" (15.88mm), 11/16" (17.46mm) , 3/4" (19.05mm), 13/16" (4.76mm), 7/8" (22.22mm) with 1/16" (1.59mm) increments. The size marks are stamped next to each step to ease the use..
  • double spiral flutes for more efficient swarf clearance.
  • 1/4 Inch hex Shank with quick release slot to eliminate slipping.
  • Self-starting for clean holes in thin materials.
  • M35 cobalt HSS to cut stainless steel. The step drill bit is made with M35 cobalt. It is ideal for variety of materials from stainless steel, metal, plastic, fiberglass to wood. They also help to enlarge existing holes. M35 HSSCo is a high speed steel alloy made up of 5% cobalt. M35 is similar to M2, but with 5% cobalt added..
  • The addition of cobalt increases heat resistance. It is widely used in metal manufacturing because of its ability to resist wear over conventional high speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M35 is also less prone to chipping when used for interrupted cuts..
Check Stock