ReviewsCobalt Steel Countersink Bits

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

Drill, countersink and counterbore in one step with this drill bit.
Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
Replacement tapered bits offered for DEWALT drill bits.
Drill, countersink and counterbore in one step.
Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.

Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
Use these countersinks to drill the pilot hole and countersink hole in one step..
4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..

Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits with Improved Connection Drill Bit with 1/4 Hex Shank and Allen Wrench,

Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set....
Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable....
Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with....
THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider....
Counter sinker drill bit set designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report....

Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 3mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

Specification - 10Pcs 3mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 33mm/1.3inch, 135 degree point, straight shank..
Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness..
Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
Easy to Carry - The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
Multi-purpose Use - HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..

Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 4mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

Specification – 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank..
Material – HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel’s high red hardness..
Durable – HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
Easy to Carry – The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
Multi-purpose Use – HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..

Check Stock

5mm Cobalt Drill Bit Set, M35 Twist HSS Drill Bits Straight Shank, 5mm High Speed Steel Drill Bits for Drilling in Hard Metal, Stainless Steel, Cast Iron

【10PCS 5mm Cobalt Drill Bits】10pcs -(Dia 5mm) x (Length 86mm) metal drill bits. This drill fits most power drills on the market today and comes with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Made of M35 Cobalt Steel, Cobalt is added to form a hardened alloy, measuring Rockwell hardness up to 67, faster cutting speed, longer service life, up to twelve times more drill bits compared to ordinary high speed steel. HSS bit set, harder than the 4241 HSS used in other similar bit sets. These bits also contain 5% cobalt for improved wear resistance and durability..
【Full Grinding Process and 135° Split Point】Fully ground helical flute design removes particles quickly, reducing friction and heat for faster, cooler drilling performance. The 135° straight shank split point prevents walking, making drilling more precise and faster..
【PROFESSIONAL AND WIDELY USED】M35 Cobalt High Speed Steel is more suitable for hardening materials. Ideal for cutting stainless steel, steel and cast iron as well as wood, aluminum alloys and other metals. Not suitable for glass or ceramic materials. Pay attention to speed, pressure and heat control when drilling..
【Quality Service】If you have any questions about ....

Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.

Check Stock

MulWark 82° Countersink Drill Bit Set incl. 5pcs Free Replaceable HSS Drill Bits for Wood｜3/8\ Quick-Change -Chamfered Adjustable Drilling Tool Kit on Pilot Counter Sink Holes for Woodworking- 5 Pack

HIGH DURABILITY - This countersink drill bit set is proudly made of classic High Speed Steel with excellent hardness of HRC 62-64.
it offers superior cutting power, high durability, and good abrasion resistance.
TRUE 82° ANGLE: These pilot screw countersinks bits are designed to match the most commonly used woodworking 82° screws you might encounter in the US and Canada.
SELF-CLEARING: Drill bits are precisely fit into the countersink sleeves and the two chamfered flutes enable faster operation and self-clearing drilling on the swarf, making perfectly sized and shaped holes.
PERFECT YOUR CARPENTRY - The 2 in 1 design turns two-step countersinking into one-step operation. This can make perfect countersink holes for both flush-set and plugged screws, without splitting the wood and enjoying neat projects with drill bit sets.
VERSATILE USE: Comes with 5 pieces of replaceable drill bits as a bonus and covers the full range of screw sizes. The countersink bits are ideal for bench drill, hand drill, and a conventional electric drill, perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber, etc...

Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.

Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.

Check Stock

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
APPLICATION: best used for drilling in hard metal, including stainless steel.
INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.

Check Stock