ReviewsCoil Wire Car

Subwoofer Lullaby

  • 1600 WATT POWER: This high powered subwoofer system has a maximum power output of 1600 watt / 800watt RMS for full range surround stereo sound....
  • BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along....
  • DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of....
  • DUAL VOICE COIL: This complete subwoofer features 60 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle....
  • 12" STANDARD SIZE: Pyle easy to mount car speaker follows the standard size for most vehicle stereo system. It has a 5.1" mounting depth and 12.2"....
Check Stock

KICKER 2 43CVR124 COMPVR 1600W 12" Subwoofers+Vented Box+Mono Amplifier+Amp Kit

  • ...p Wiring Installation Wire Kit with RCA's. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. 12" CompVR 4 Ohm:.
  • The CompVR 12-Inch Subwoofer is a 4dual voice coil design, built for easy wiring. CompVR creates your bass using high-temp, dual voice coils. A ribbed Santoprene surround also gives the cone added strength under stress. The perimeter venting, Spiralead tinsel-lead technology, and spring-loaded push terminals are part of the high-performance engineering standards found on every KICKER woofer..
  • The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. Features/Specifications: Kicker 43CVR124 12"800 Watt Dual Voice Coil 4-Ohm Car Stereo Subwoofers. Power Handling : Peak :800 watts. RMS :400 watts. Size : 12". Injection molded SoloKon cone. Ribbed Santoprene Surround. Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals.
Check Stock

Infinity - Two Kappa 10' (250mm) 450Watt RMS High-Performance Subwoofers, Switchable 2 OR 4 OHM

  • Most car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands. A proprietary HARMAN technology, SSI lets you reconfigure your system by simply flipping a switch..
  • The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability. This aero-cooling design is unique among aftermarket subwoofers..
  • Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently nonresonant, the glass-fiber cones eliminates distortion so your music—and nothing but your music— comes through loud and clear..
  • Power is the lifeblood of any subwoofer. The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs..
Check Stock

Infinity - Two Kappa 12' (300mm) 500 Watt RMS, High-Performance Subwoofers, Switchable 2 OR 4 OHM

  • Most car audio system designs call for 2- or 4-ohm impedance. Kappa Series subwoofers put the choice in your hands. A proprietary HARMAN technology, SSI lets you reconfigure your system by simply flipping a switch..
  • The Kappa Series voice coil employs a two-sided, ducted airflow design that cools the voice coil, increases power handling and improves reliability. This aero-cooling design is unique among aftermarket subwoofers..
  • Kappa subwoofer cones incorporate glass-fibers for exceptional accuracy and detail. Inherently nonresonant, the glass-fiber cones eliminates distortion so your music—and nothing but your music— comes through loud and clear..
  • Power is the lifeblood of any subwoofer. The terminals on the Kappa subwoofers accommodate up to 8-guage wire (8.37mm 2 cross section), which transfers low-resistance, low-loss power to the woofer, even over long wire runs..
Check Stock

5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP

  • 6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speake....
Check Stock

Pyle 8-Inch Carpeted Subwoofer Tube Speaker - 400 Watt High Powered Car Audio Sound Component Speaker Enclosure System w/ 2” Aluminum Voice Coil 4 Ohm 30Hz-700kHz Frequency - Pyle PLTB8,Black

  • 400 WATT POWER: This high powered audio projection carpeted subwoofer tube enclosure system has a maximum power output handling of 400 watts so you can play your favorite tracks as loud as you want and with style.Impedance: 1 ohm.Speaker size:8 inches.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 11.5” diameter x 19.5” length.
  • 2” ALUMINUM VOICE COIL: This car speaker has 2” aluminum voice coil with 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 30Hz - 700kHz FREQUENCY: The 2” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 30 Hz to 700 Hz. It is also super easy to install to your vehicle's sound system.
Check Stock

Kicker 43CWRT672 CompRT 6.75 Inch 300 Watts 2 Ohm Dual Voice Coil Shallow Slim Car Audio Subwoofer with Santoprene Surround and Polypropylene Cone

  • 6.75-INCH SUBWOOFER: One Kicker CompRT Round 6.75 Inch Shallow Mount Car Audio Subwoofer for serious bass power.
  • 300 WATTS MAX POWER: MAX Power Handling: 300 Watts.
  • DUAL VOICE COIL: Dual voice coil 2 ohm impedance and 82.6 dB sensitivity with 60.5 Hz driver resonance frequency.
  • POLYPROPYLENE CONE: Features injection molded polypropylene cone and rubber surround that's weatherproof for outdoor use.
  • SPECIFICATIONS: Mounting depth: 2.75 inches.
Check Stock

Hifonics BG-1600.4 Brutus Gamma 4 Channel Super A/B Class 1600 Watt Car Audio Sound System Subwoofer Speaker Amp Amplifier

  • ... TechnologyThe Ultra-Fi MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion. Heat Sink: Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi output devices. Power Supply: Simpatico Coil DesignThe dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices..
  • Output Connections: High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal. Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile..
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • ...plifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover: Variable Low-Pass / High-Pass. Green/red status LED. 2 pair RCA pre-inputs. Max Power Output Ratings. Total Max Power: 600W. RM....
Check Stock

4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391

  • 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style.
  • 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction.
  • 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound.
  • 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size.
  • 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D.
Check Stock

Pyle 8-Inch Carpeted Subwoofer Tube Speaker - 250 Watt High Powered Car Audio Sound Component Speaker Enclosure System w/ 1.5” Aluminum Voice Coil 4 Ohm 35Hz-800Hz Frequency LED RCA - Pyle PLTAB8

  • 250 WATT POWER: The high powered audio projection carpeted subwoofer tube enclosure has a max power output of 250W so you can play your favorite tracks as loud as you want w/ style. Equipped w/ built-in high output amplifier & RCA/speaker line input.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
  • 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
Check Stock