ReviewsCoil inductor

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

Check Stock

MartinLogan Motion SLM X3 Ultra-Slim 3-Channel Passive Soundbar - Black

L-C-R soundbar, Slim design, Binding Posts: Push style.
High Frequency Driver: Three 1" x 1.4" Folded Motion Transducers with 5.25" x 1.75" diaphragm.
Low Frequency Drivers: Six 4" paper cone, sealed cabinet.
Components: Custom air core coil inductors, polyester film capacitors in series and low DF electrolytic capacitors in parallel, overall system thermal/current protection.
Frequency Response: 120–23,000 Hz ± 3 dB.
Dispersion: 80° x 80°, Sensitivity: 93 dB @ 2.83 volts/ meter.
Impedance: 4 Ohms. Compatible with 4, 6 or 8 Ohm rated amplifiers..
Crossover Frequency: 3,000 Hz (2-way design), Recommended Amplifier Power: 20–140 watts.
Dimensions with wall bracket (HxWxD): 6.3" x 48" x 2".

Check Stock

Yetaida 130pcs CD54 SMD Power Inductor Assortment Kit, 13values 2.2uH-680uH Chip Inductors,CD54 Wire Wound Chip

【13 Value CD54 SMD Power Inductors】: You will get 140 pieces of CD54 SMD Power Inductors, including 2.2UH 3.3UH 4.7UH 6.8UH 10UH 22UH 33UH 47UH 68UH 100UH 220UH 330UH 470UH 41 transparent mesh box. Sufficient quantity for your general needs..
【High Quality】: The plug-in inductor is made of durable and practical ferrite core, metal material, the quality and meticulous craftsmanship can prevent the inductor from rusting. Each value is produced under strict standards that are precise and conform to their values..
【Product Features】Maximum temperature range: -55℃ ~ +105℃.
Rated voltage: 16V, 25V, 35V, 50V (varies according to the model).
Maximum temperature range: -55℃ ~ + 105℃.
【Easy to use】: We pack the inductor in a 15-grid plastic storage box, and put a clearly visible label on the surface of the box. The label corresponds to the inductance of the corresponding size, which is convenient and quick to use..
【Wide application】CD54 wire wound chip power inductor can be widely used in buck-boost converters, monitors, computer boards, PCB boards, PCs, laptops, radios, TVs, speakers, copy smart door locks, network communication equipment, etc..

Check Stock

Elesunory 24 Values 240 Pcs Inductors Set I-Shaped Inductor 2.2uH to 100mH Cylindrical Plug-in Inductor Assortment Kit (Black)

【Various Specifications】This inductor set has 240 traditional through-hole inductors, classified in 24 small transparent envelopes, each with 10 values. The rich and diverse product specifications perfect to work in your circuit work..
【High Quality】Made of high-quality professional guide pins, stable performance, not easy to open circuit phenomenon, large current resistance, high self resonant frequency. The choice of values is perfect for filter design in power switching or audio applications..
【Easy to Use】We distribute the inductors in plastic storage boxes (a single-compartment box that snaps closed), and stick a clear label on the surface of the box to provide users with the type of inductors they need, which is convenient and fast to use..
【High Quality】 The plug-in I-shaped inductor uses fine materials, meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and each value is produced under strict standards, allowing you to get a perfect product..
【Quality Service】This inductors assortment kit is of good quality. In order to optimize your shopping experience, we provide a 180-day free replacement service. If you have any questions about our products, pl....

Check Stock

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.

Check Stock

uxcell a13070600ux0394 10 Piece 2 Leads 100uH 8x10 8 mm x 10 mm Radial Leaded Power Inductors

Color Rings:The first two of these represent a two-digit significant number. The third band represents the multiplier. The inductance is calculated by multiplying the significant number by ten to the power of the value of the third band. The fourth band represents the tolerance..
Small inductors having high Q and low distributed capacity. Excellent for use where space, weight and size is a factor..
Axially leaded inductors with a 10% tolerance suitable for a wide range applications including decoupling, filtering and RF blocking..
These fixed inductors are coated with epoxy resin ensures humidity resistance for long life.Fixed inductor uses multiple coils of a conducting material to store energy using a magnetic field..
For low current and low power are made in cases resembling resistors. These may be either plain (phenolic) core or ferrite core. An ohmmeter readily distinguishes them from similar-sized resistors by showing the low resistance of the inductor..

Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

High-frequency transducer: XStat CLS electrostaic transducer.
Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-400 watts per channel.
Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.

Check Stock

uxcell 50Pcs 0510 Color Ring Inductor 33uH 1W Axial RF Choke Coil Inductor

USER-FRIENDLY:More user-friendly, it can be distinguished via the recognition value and the five color wheels..
HIGH PERFORMANCE:Working as the 1/4W metal film inductor set, this experimental inductor set is for high performance according to strict rule..
HIGH QUALITY MATERIALS:The inductor is made with high quality materials, it has stable performance and has long serving life..
SET INCLUDES:This product includes 12 general inductance values(1UH, 10UH, 22UH, 33UH, 47UH, 100UH, 150UH, 220UH, 330UH, 470UH, 560UH, 1MH), there are 10PCs for each value..
WIDE RANGE OF APPLICATIONS:This inductor is especially suitable for various electrical and experimental projects such as for Arduino, breadboards, general-purpose boards, and circuits..

Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.
Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".

Check Stock

INTSUPERMAI GLF-500F Handheld Electromagnetic Induction Aluminum Foil Sealing Machine Portable Bottle Cap Sealer 25-100mm

☛[High Quality]: Imported MCU control, high quality IGBT power transistor, coupled with thicker copper induction coil, make the equipment run more efficiently, high power, low power consumption..
☛[Sealing Range]: The Sealing diameter 25-100MM(1-3.94 inch) of plastic and glass bottles. Can not be used for metal caps, metal bottle bodies and sharp-nosed caps..
☛[Functions]: 0.8KW-1.2KW power(adjustable) can be adapted to different bottle mouth sizes. It also has counting function, automatic overheating, over-voltage and over-current protection functions..
☛[Deatails]: High quality heat dissipating fan, thickening inductor and sensitive response button, high temperature resistant wire..
☛[Application]: This Induction Sealer is widely used for sealing plastic bottles and glass bottles in the fields of medicine, chemical industry, food, beverage, greased products, lubricating oil, antifreeze fluid, etc..

Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).

Check Stock