ReviewsCoilover Camber Plates

YLDEE Magnetic Camber Caster and King Pin Gauge (Red)

  • Robust magnetic gauge mounts onto wheel/hub for quick accurate measurement of camber,castor angle kingpin inclination.
  • Camber gauge with fixed graduation from +5 to -5.
  • Adjustable caster gauge graduated +11 to -3.
  • Kingpin gauge graduated from 0 to 14 left to right.
  • Very solid, well made. Magnets are very strong, reliable and accurate! Suitable for vehicles fitted with steel wheels. To be used in conjunction with steering turntables and rear wheel level plates..
  • Supplied in tough composite carry-case. Suitable case with enough padding will protect the Camber Castor Gauge very well..
Check Stock

Yonaka Compatible with Honda Accord 2013-2017 Spec 2 Full Coilovers Suspension Shocks Springs Struts

  • Fully threaded dual tube advanced shock absorber.
  • Adjustable camber plates (3 degrees camber adjustment).
Check Stock

Godspeed MRS1432-A Godspeed MRS14320-A MonoRS Coilover Suspension Lowering Kit, 32 Damping Adjustment, Ride Height Adjustable, compatible with Toyota Camry SE/XSE (XV70) 2018-21

  • Compatible With Nissan 350Z (Z33) 2003 2004 2005 2006 2007 2008 2009.
  • TRUE COILOVER CONVERSION FOR REAR STRUTS.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

Rev9 R9-HS2-008_2 Hyper-Street II Coilover Suspension Lowering Kit Mono-Tube Shock w/ 32 Click Rebound Setting Full Length Adjustable compatible with Infiniti G35 Coupe V35 2003-07

  • Compatible With Infiniti G35 Coupe (V35) 2003 2004 2005 2006 2007.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount //....
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To....
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Ocasar Coilover Wrench Spanner, 4PCS Non-Slip Spanner Wrench Set, Professional Universal Rubber Handle Wrench Spanner Tool for Floor Heating Pipes and Cars Walnut

  • 【Protect Your Hands】The slip-resistant rubber handle of the universal wrench spanner is aim a soft grip, provides high torque and improve work efficiency. Giving you a comfortable and safety use experience..
  • 【Universal Coilover Wrench Kit】4 different size coilover wrench(ER40 ER32 ER25 APU16 )gives good range for different usages, like car repair, plumping repair, electric maintenance, mechanical. They can compatible with Skunk2 Adjustable Sleeve Coilovers, DME coilovers, Apexi etc..
  • 【High-Strength Materials】Coilover wrench tool made by professional carbon steel, wear resistance, provides high strength and durability. Black power coated finish, let the paint stay in longer time, protect the coilover wrench spanner away from rust. Laser marking non-slip spanner wrenches for easy identification..
  • 【Unique Design】The coilover wrench kit are designed with the front hook that is provided to engage with side holes or slots, so they don't slip or wear out, and they can be practical presents for your family or friends who need them. Vivid and beautiful color let y....
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

LEIMO KPARTS Universal Coilover Shock Adjustment Spanner Wrench Tool Set,motorcycle c hook spanner wrench .

  • 【 Universal Coilover Shock Spanner Wrench】1x small Spanner fits: small locking collar on coil overs such as DME, Fuction Form 1 & 2, D2 and more.
  • 1x medium Spanner fits: Special coilovers on certain Apexi, KW, H&R, and more.
  • 2x large wrench fit: Tein, Truhart, Some skunk2 and more..
  • 【PERFECT FIT】laser cut Precision machined Coilover Spanner Wrench front hook provide engagement with side holes or slots, so they don't slip and wear out, Perfect for Adjustable Coilover Shocks..
  • 【STRONG AND DURABLE】Unique unibody design, are made with cold roll sheet steel, Make our Shock Spanner Wrench strong and durable, not easy to break, powder coated to prevent corrosion has long service life..
  • 【PROTECT YOUR HANDS】The Each wrench has non-slip rubber sleeve to protect your hands and avoid injury during use..
  • 【PURCHASE WITH CONFIDENCE】brand new Coilover Shock Adjustment Spanner Wrench, excellent quality, built to last. To guarantee 100% customers' satisfaction, we accept unconditional return service and 180 days warranty for all parts, Please contact with us if ....
Check Stock