ReviewsCold Bending Forming Machine

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

Rawhide Mallet Size 2' Diameter Face

  • The face diameter is 2" head length is 3" and the weight is approximately 6 oz. Total length 12.5 inch..
  • Rawhide mallets are used in metal working when the work cannot be marred..
  • The top-quality construction. Excellent for forming, bending, and flattening without marring..
Check Stock

Creekside Naturals Snifflex, Cold and Allergy Relief for Children, with Elderberry for Immune Support, Pediatrician Formulated, with NAC, Quercetin and Bromelain, Zero Sugar, Vegan, 60 Soft Chewables

  • NATURAL COLD & ALLERGY REMEDY: Let Creekside Naturals Snifflex remedy your child’s cold and allergy symptoms with a delicious elderberry flavored chewable for children ages 2 & up..
  • SAFE, GENTLE & NON-HABIT FORMING: Created by a pediatrician, our kid-friendly formula is made of non-habit forming, natural ingredients. Soothe symptoms of cold and allergy naturally, including sneezing, coughing, sniffles, sore throat, and itchy, watery eyes..
  • COLD & ALLERGY SUPPLEMENT WITH QUERCETIN & BROMELAIN: Our natural supplement is made of natural ingredients including quercetin and bromelain, non-habit forming ingredients used for centuries to counter inflammation and histamine’s effects on the body..
  • NATURAL INGREDIENTS: The original kid-friendly formula was created by a pediatrician to soothe cold and allergy symptoms in children. Creekside Naturals products are zero sugar, drug free, gluten free, lactose free, gelatin free, vegan, Non-GMO, and NSF certified for quality and purity..
  • CLINICALLY DRIVEN, NATURALLY MADE: Creekside Naturals products are made of high-quality, wholesome, natural ingredients for your entire family - from babies to toddlers to kids to young adults... and for a variety of needs including sleep, anxiety, focus, digestive health, and overa....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

IRWIN VISE-GRIP Original Locking Pliers/Sheet Metal Tool, 8-Inch (23)

  • Makes bending, forming, and crimping sheet metal easier.
  • Constructed of high-grade heat-treated alloy steel for durability.
  • Classic trigger release designed to provide maximum locking force.
Check Stock

Markal - 86733 Thermomelt Temperature Indicator Heat Stick, 400 Degrees Fahrenheit, 5\ Length

  • Accurate, fast, low-cost method for measuring surface temperatures.
  • Ideal for applications such as annealing, forging, welding, bending, forming.
  • Initially the mark appears dull and chalky then quickly melts to a transparent-appearing liquid.
  • Accurate to within +/- 1 percent of rated temperature.
Check Stock

OdontoMed2011® Aderer 3 Jaw Pliers Wire Bending and Loop Forming Pliers Three Jaw Plier

  • Aderer 3 Jaw Pliers Wire Bending And Loop Forming Pliers Three Jaw Plier.
  • Gauranteed Satisfaction And Value For Money.
  • OdontoMed2011 Products Offer A Handmade Touch To Each Instrument..
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

szzijia 5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~700°C

  • Can compatible with TM902C/TES1310 Meter to use.
  • Allows forming and bending of the thermocouple,no need to worry about the risk of cracking.
Check Stock

faruijie Typodont Teeth - 28pcs for Typodont Dental Teeth Model Removable Teeth use for Practice and Teaching…

  • Dental Hard Splint mainly used for manufacturing of dental retainers, and need to use with vacuum forming machine to make a oral cavity shape negative mold..
  • Advantages: No bubbles when molding, with excellent wear resistance and stability..
  • Usage: Tear off the protective films on both sides before use.Use vacuum forming machine to heat for about 2-3 minutes to make it soft then Vacuum and Molding..
  • Notice: please store it in a cool place. Once it is open, use it as soon as possible to prevent forming sheets getting damp..
Check Stock