ReviewsCold Drawing Steel Pipes

TCMT Megaphone Slip-On Mufflers Dual Exhausts Fit For Harley Touring Electra Glide 95-16

  • Condition:Aftermarket 100% brand new and high quality..
  • Material: 16G Cold Rolled Steel,Aluminum alloy(CNC).
  • Size:Total Length about 29.3'' (74.5cm), Inlet 1.89''(4.8cm), Outlet 3.5''(8.8cm).
  • Fitment: Fit For 1995-2016 Harley Touring Models With Dual Exhaust.
  • Package Included: 1 Pair Exhaust Pipes(Just as picture).
Check Stock

Halero Pipe Wrap Insulation 1/5 Inch Thick Pipe Insulation High Density Waterproof Foam Tape with Self Adhesive Application for Hot or Cold Pipe 26FT Length× 6 Inch Width

  • 【Size】26'×6"×1/5" waterproof pipe insulation foam wrap tape.(length:8m,width:15cm,thickness:5mm).
  • 【High Density Foam】This duct insulation foam is made with high density closed cell PE foam material and a high quality aluminum foil backing,which has good insulation properties, and is resistant to cold, heat, oil, and moisture..
  • 【Strong Self Adhesive】Can firmly stick to the surface, not easy to fall off, can provide better sealing..
  • 【Easy to Cut】The pipe warmers material is easy to cut and install, and can be cut according to the length you need. Since the width is wider than the general insulating foam adhesive, it can be divided into two or more parts for use..
  • 【Excellent Thermal Insulation Effect】Our pipe insulation tape is very suitable for hot and cold pipes. It can lock the heat of the hot water pipes to avoid loss, and also help to prevent the cold water pipes from getting wet and prevent the floor from getting wet. At the same time, it also has a certain protective effect on the pipes..
Check Stock

KOLERFLO 115V Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System(RS15-6 Blue)

  • ...67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and....
Check Stock

Himesi DIY Professional Pipe Insulation Foam Tube 1/4',1/2',1',1-1/4',2' Outdoor Pipe Insulation Condensing Boiler Gas Insulation Pipe Heat Preservation Insulated,1pcs (Size : 2' x3/4' x6ft)

  • ✄【Material】- Rubber-plastic foam, good insulation, heat insulation, sound insulation, good vibration resistance.
  • ✄[Insulation] – Pipe insulation pipes are excellent at preventing pipe freezing and energy loss. Suitable for indoor and outdoor cold and hot water pipes, gas pipes, boiler pipes, heating pipes, steam pipes.
  • ✄[Anti-collision] – Foam tube storage can protect your pipes from bumps and scratches and is a good choice for extending the life of your pipes.
  • ✄[Weather Resistance] – Another common use of soft rubber foam is for various door sealing and window insulation.
  • ✄【Easy installation】 – Put it directly on the pipe, even if you are not a professional plumber, you can do professional water pipe insulation, saving labor and time.
Check Stock

M-D Building Products 50164 Pipe Insulation & Tape, Black, 6 Ft

  • Prevent heat loss or gain to save energy.
  • Easy to install with pre-cut, self-sealing slits.
Check Stock

M-D Building Products 50150 Pipe Insulation, Black

  • Stops condensation on cold pipes to prevent water damage.
  • Easy to install. Tube Pipe Insulation- 3/8 inch Wall - 3/4 inch x 6 feet.
Check Stock

M-D Building Products 50154 Pipe Insulation & Tape, 3/8", Black

  • Stops condensation on cold pipes to prevent water damage.
Check Stock

Camping Stoves,tent stoves wood burning portable,tent stoves wood burning,tent stoves wood burning,hot tent stove,camping stove ,tent wood stove,Portable Wood Stove for Tent with Large Firebox

  • 【Highly Portable Design】>>Easy to Carry with 15.4lbs.The side shelves can be used as carry handly. The foldable legs can fold flat under the....
  • 【Heat Adjustable Design】>>One of the Chimney Pipes comes with dampel tool for managing flame and burn rate. The heat-resistant glass Let you....
  • 【Durable & Sturdy Construction】>> Adopted high quality Steel Frame and heat-resistant paint that provide warmth and heat to a space in outdoor....
  • 【304 Stainless Steel Chimney Pipe】>>Including 7x Chimney Pipes, diameter is 2.36inch / 6cm. help you adjust the height to suit various places.....
  • 【Multifunctional Camping Stove】>> Suggestion:You'd better do the first burn in before use. No longer have to suffer cold nights inside a tent....
Check Stock

QWORK Exhaust Pipe Cutter, Cuts 3/4-Inch to 3-Inch Tailpipes and Exhaust Pipes, Universal Exhaust Tailpipe Tube Cutting Pliers, Carbon Steel Tubing Cutter with 14 Blades

  • High Quality: Premium 1045 steel handle and bearing steel blade, with great wear resistance, corrosion resistance and not easy to break,100% durable material..
  • Cutting Pipes: The exhaust pipe cutter can cuts pipes with diameters of 3/4inch to 3 inches..
  • 14 Blades: There are 14 blades on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting..
  • Wide Application:It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc..
  • 100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within a month you purchase this product, you can enjoy a worry-free return service. And any questions feel free to contact us, we will try our best to help you..
Check Stock

KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)

  • ...67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so ....
Check Stock

WORKPRO 10 Inch Aviation Snips Set, 3PCS Straight Left and Right Cut Tin Snips, Metal Cutting Shears with Cr-V Steel Sharp Teeth, Safety Latch and Hanging Hole

  • 【Quick Cutting】The WORKPRO tin snips are made of CRV, the aviation snip set is characterized by durable construction and sharp teeth, which ensures quick and easy cutting..
  • 【Safety Guarantee】 To avoid accidental injury, the safety latch can keep jaws securely closed and the self-locking nuts ensure firm connection and prevent falling off..
  • 【Energy-saving Operation】 There are two leverage pivots for each aviation snip, which is helpful for energy-saving operation and easy cutting..
  • 【Ergonomic Handle】 Using TPR material for long-term operation and comfortable hand feelings, the handle also has a hanging hole which is convenient for storage and easy to carry..
  • 【Wide Application】 With a cutting thickness range up to 1.2mm cold-rolled steel sheet, you can use these snips to cut metal wire, thin PVC pipes, keel, square steel pipes, etc..
Check Stock