ReviewsCold Pipe

Shark Industries PN-12248 Wrap-Around Pipe Template with Metal Clip for Welders and Pipe Fitters, 4' W x 60' L

  • Flexible Pipe Template – Flexible material allows pipe fitters, welders and layout men to easily wrap it around pipes and make precise marks.
  • Large Coverage Size – Each template for pipe cutting measures 4 inches in width and 60 inches in length, and is made from flexible gasket material with resistance to heat and cold.
  • Printed Markings – You’ll find a variety of markings, including a measurement scale, a protractor and a 45-degree angle and other helpful markings.
  • Metal Clip Included – Secure the wrap to pipes with the included metal clip.
  • Mark Straight Lines – Another benefit of the template wrap is that you can use it as a straight edge when marking a pipe prior to welding or cutting.
Check Stock

12 Pack Pipe Insulation Foam Tube Pre Slit Self Adhesive Foam Pipe Covers Polyethylene for Outdoor Indoor Water Pipe Pipeline (0.8 Inch)

  • Sufficient Quantity: you will receive 12 pieces of pipe insulation foam tubes, with the size of 2 cm/ 0.8 inch in diameter of the middle hole, 1 cm/ 0.4 inch in thickness, 40 cm/ 15.7 inch in length, ample quantity can meet your using needs.
  • Quality Material: the foam pipe insulation is made of foam, with flame retardant on the surface to prevent fire, safe and reliable to use.
  • Self Adhesive: the water pipe insulation tube is self adhesive, will form tightly seal after removing the protective paper, not easy to fall, reassuring to use.
  • Practical Function: the outdoor pipe insulation cover is suitable for hot and cold pipes, which can save resources by stopping condensation, and can prevent heat loss, fitting to prevent water pipes from freezing in winter and sweating in summer.
  • Convenient to Use: the foam insulation tubing is equipped with the pre cutting slit, which makes it easier to open and install on the pipe, bringing much convenience for your installation.
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

ADHES Foil Tape Aluminum Tape Heat Resistant Tape Metal Duct Tape 100mm x 50m

  • 1，[ High Temperature Resistant ] ADHES Foil Tape Withstands extreme temperature from -20°C to 180°C. Resists flame, thermally conductive, smoke transmission and some areas requiring thermal insulation..
  • 2，[ Excellent Waterproof ] ADHES Aluminum Tape can be used for repairing, sealing, Fixed wire and cable, hose, pipe etc. It also provides waterproof protection. Excellent moisture and weather resistant..
  • 3，[Chemical&Heat Resistant ] ADHES heat resistant tape has strong anti-corrosion properties and rusty resistant. Suitable for professional pipe sealing, and kitchen exhaust pipe sealing..
  • 4，[Widely Used Insulation Tape] ADHES tape Ideal for multiple uses, including repairing, sealing hot and cold air ducts, kitchen moisture prevent, duct insulation systems, stainless and plastic seams, temporary repair of metal surfaces, copper pipe fixing, etc.
  • 5，[Trusted Brand] ADHES has been manufacturing tape for 18 years since 2002. It never stop investing in improving products and hope to contribution to this world with more safety and quality products..
Check Stock

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

  • Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
  • FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..
  • INSTALLATION: The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
Check Stock

Meshscreen Pellet Smoker Tube 6 inches - 5 Hours of Billowing Smoke，Stainless Steel Pellet Smoker Tube for All Grill or Smoker for Cold/Hot Smoking,with 2 S Shape Hooks+1 Cleaning Brush

  • Good applicability:This smoke pipe for gas grill is suitable for any grill (gas, electric or charcoal) and smoker. It adds the aroma you want to your....
  • Lasts 5 hours:All you need to do is add your favorite wood pellets (apple, pecan, hickory, mesquite, oak, cherry, etc.) to the smoker tube for pellet....
  • Hexagon Design : The design is conducive to the stability of the smoking pipe, making the smoking pipe not easy to fall, and more beautiful and with a....
  • Cold or hot smoked：Pellet smokers can be used with cold smoked cheese and nuts, or hot smoked ham, steak, fish, chicken, pork, fruit, corn, bacon....
  • High quality 304 steel :High-quality smoking pipes are made of 304 steel, which is safe, durable, and easy to clean, rust-proof and heat-resistant,....
Check Stock

Genova Products 30190 PVC Slip Coupling, 2-1/2"

  • Ideal for cold water pressure applications.
  • Used in irrigation, underground residential sprinkler system, water service pipe, deionized water lines, swimming pool installations and some chemical drainage systems.
  • INSIDE MEASUREMENT – 2-1/2″ slip x 2-1/2″ slip.
Check Stock

No Clean Tacky Soldering Flux 5 Grams

  • Water-soluble paste won’t leave residue in water piping.
  • Meets industry standard ASTM B813 and contains no zinc chloride to reduce corrosion concerns.
  • Non-acid, non-toxic, and lead-free to eliminate safety concerns.
  • Cleans pipe upon application, allowing solder to run more smoothly around the pipe.
  • All-weather formula for use in hot and cold climates.
Check Stock

SINISTER DIESEL INTERCOOLER CHARGE PIPE KIT FOR FORD POWERSTROKE 2003-2007 6.0L

  • Performance Notes - Mandrel Bent for Minimal turbulence and Maximum flow.
  • Kit Includes - (1) Cold Side Charge Pipe, (1) Hot Side Charge Pipe, (4) Silicone Boots, and (8) Stainless Steel Spring Clamps.
Check Stock

Farm Plastic Supply - Greenhouse Clamp 20 Pack - (4\ Long x 3/4\ Wide) - White PVC Clamps for Greenhouse, PVC Clips, Greenhouse Clamps for Farming, Gardening, Agriculture

  • Secure Hold - PVC Greenhouse Clamps provide a strong hold on the film without punctures or adhesives. Easily secure your greenhouse plastic sheeting, shade cloth, construction film, or any other type of material without tearing or damaging your product..
  • 4" Long x 3/4" Wide - Works on 3/4" PVC pipe, or 1.00" O.D. post. Our clamps for pvc pipe are engineered to have a higher temperature resistance, making them more durable in the sun and heat..
  • Uses - Great for building cold frames, greenhouses, shelters, or row covers. Compatible with any type of pipe, including PVC. Strong grip with ABS, will not degrade your plastic sheeting or film over time..
  • UV Stabilized - PVC Clamp Greenhouse Clamps allow quick and easy attachment of tarps, plastic sheeting, shade cloth or netting to any type of pipe. These durable PVC clamps are UV stabilized and frost resistant to provide many years of dependable use..
  • Premium Gardening Supplies - Our pipe Greenhouse clamps are for gardeners, farmers, or everyday growers. Farm Plastic Supply aims to offer premium gardening products and farming solutions..
Check Stock

Vent Systems Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate for Cooling Heating Ventilation System 8 inches B

  • --High quality-This is our new black 4-inch pipe plastic connector flange for heating and cooling ventilation systems. Used to connect the pipe hose....
  • --Rugged and durable – Our 4-inch flange connectors are made of ABS plastic. This is a high-quality material, known for its toughness and resistance....
  • -Wide range of applications-Our pipe flanges to wall-mounted dryer vents are ideal for piping your tumble dryer, bathroom or kitchen exhaust fans and....
  • --Quick installation-Our 4-inch pipe collar has pre-drilled mounting holes for easy and quick installation. Use 4 M3/M3.5 screws to mount our 4-inch....
  • --Secure Fit-By using our plastic flanges, you can obtain an airtight seal to prevent any cold or hot air from entering your home, thereby reducing....
Check Stock