ReviewsCollar For Pipe

SharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A

  • SHARKBITE PVC DISCONNECT CLIP: 1/2, 3/4, and 1 inch disconnect tools are used to perfectly release a SharkBite PVC fitting from any white collar iron pipe-sized fittings.
  • can adjust or remove PVC SharkBite fittings in tight spaces for easy disassembly.
  • COMPATIBILITY: These push-to-connect fitting disconnect tools can be used to release the white collar of a SharkBite PVC fitting from schedule 40, 80, or 120 PVC pipe and schedule 40 and 80 CPVC.
  • ideal for marking proper safe seal insertion depth on a pipe for SharkBite fittings.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in....
Check Stock

Oatey Oatey-12977 12977Roof Flashing, 3-Inch-4-Inch, Aluminum

  • Patented All-Flash design allows use on multiple pipe sizes..
  • Rated 180 DegreeF continuous heat and approved for Type B installations..
  • Self-sealing collar slides over pipe and requires no caulking..
Check Stock

NDS 909B 3

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Fits 2 in. Sch. 40 Pipe, 3 in. Sewer and Drain Fittings. 8 GPM flow rate. 2.7 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 3 in. Round Drain Grates with Collars are available in a variety of materials.
  • Comes with one 3 in. Round Grate and Collar. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
Check Stock

NDS 910B 4

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates with Collars are available in a variety of materials.
  • Comes with one 4 in. Round Grate and Collar. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits 3 in. Sewer and Drain Pipe, 4 in. Sewer and Drain Fittings. 16 GPM flow rate. 5.3 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock

Builders Best 010889 Galvanized Dryer Vent Hood

  • Outlet pipe and vent hood assembly installs easily through exterior walls for efficient clothes dryer venting.
  • Removable bird guard helps prevent birds and other pests from nesting in vent or entering home.
  • Louvered hood dampers operate quietly for maximum exhaust air flow.
  • Pipe is 4” diameter, 11” long, constructed of durable aluminum, and comes with a high impact styrene collar.
  • Contractor grade, heavy duty construction, with a limited lifetime guarantee.
  • Note: Check periodically and remove lint or other debris if present.
Check Stock

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

  • ...e removal tool, then insert the replacement piece to complete the switch..
  • 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
  • 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environments, with a long service life..
Check Stock

Vent Systems Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate for Cooling Heating Ventilation System 8 inches B

  • --High quality-This is our new black 4-inch pipe plastic connector flange for heating and cooling ventilation systems. Used to connect the pipe hose....
  • --Rugged and durable – Our 4-inch flange connectors are made of ABS plastic. This is a high-quality material, known for its toughness and resistance....
  • -Wide range of applications-Our pipe flanges to wall-mounted dryer vents are ideal for piping your tumble dryer, bathroom or kitchen exhaust fans and....
  • --Quick installation-Our 4-inch pipe collar has pre-drilled mounting holes for easy and quick installation. Use 4 M3/M3.5 screws to mount our 4-inch....
  • --Secure Fit-By using our plastic flanges, you can obtain an airtight seal to prevent any cold or hot air from entering your home, thereby reducing....
Check Stock

Oatey Oatey-14122 14122 Rain Collar 1.25\-1.5\ No-Calk Roof Flashing,Black

  • Use as a protective water shield (slides down over pipe).
  • Do not use petroleum based products on rubber collars.
Check Stock

Cone Top Chimney Cap in Galvanized Steel (8 Inch)

  • PERFORMANCE: This heavy-duty all-weather chimney cap is constructed from 28 gauge galvanized steel and is designed to keep rain and snow from getting down the chimney pipe.
  • FIT: The cap is designed to be mounted over single wall pipes and comes with a draw bolt collar to help ensure a secure fit.
  • SIZES: This item is available in 5 different sizes to accommodate multiple pipe diameters.
  • QUALITY: This product is manufactured in the USA and comes with a 1 year warranty against product defect and workmanship.
Check Stock

Shasta Vent 'Thru-The-Wall Kit' for Class A, All Fuel, Double Wall, Insulated, SS Shasta Vent 6' Chimney Systems

  • This Thu-The-Wall Kit includes the component parts needed for the typical through the wall.
  • Installation, including a Tee with Cap, Tee Support, Wall thimble with Finishing Collar, 8" Pipe.
  • section, two Wall Brackets, and a Chimney Cap. Just add pipe, and you should have a complete.
Check Stock

The Forever Cap CCSSE1313 13 x 13-Inch Stainless Steel Single Flue Diamond Mesh Chimney Cap

  • PERFORMANCE: This heavy-duty all-weather chimney cap is constructed from 28 gauge galvanized steel and is designed to keep rain and snow from getting down the chimney pipe.
  • FIT: The cap is designed to be mounted over single wall pipes and comes with a draw bolt collar to help ensure a secure fit.
  • SIZES: This item is available in 5 different sizes to accommodate multiple pipe diameters.
  • QUALITY: This product is manufactured in the USA and comes with a 1 year warranty against product defect and workmanship.
Check Stock