ReviewsCollet Set

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • ...s to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet in....
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

[Gulfcoast Robotics] Bowden Collet and Clip Set for 1.75mm Creality All Metal Hotend 5 Pack

  • Bowden collet and clip set are designed for and compatible with the [Gulfcoast Robotics] All Metal Hotend for Creality 3D Printers..
  • Also compatible with the Micro Swiss All Metal Hotend and similar products on the market..
  • Package includes (5) sets of black bowden collets and matching collet clips..
Check Stock

1/4 Inch Shank Router Collet Extension Rod Chuck Holder Extender Adapter Woodworking Milling Bit Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet 6.5mm 12.7mm, ER20 M Type Wrench Spanner

  • ... quality material, durable and practical to use.
  • High strength, good toughness, strong shock resistance. Make you more efficient to process products, suitable for woodworking trimming, milling, engraving machine..
  • Shank Diameter: 1/4"(6.35mm), Accept Shank Size: 1/4" & 1/2" Shank, Extend Length: 2-1/4".
  • This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. Extend the bit to provide the full depth of cut and eliminate the dangerous..
  • Easy to Use- Place the router collet extension shank in the 1/4-inch router collet and the router bit shank in the extension collet and tighten both.
  • M Type ER20M wrench included. Need M Type ER20M wrench to tighten the collet..
  • Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits. Widely used, boring, milling, drilling, silk attack, sculpture, CNC, and other processing, for professionals and hobbyists demanding..
  • Package including: one 1/4 Inch shank collet extension, one ER20 6.5mm Collet, one ER20 12.7mm Collet, one M Type ER20M wrench.If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not hesitate, p....
Check Stock

DNA MOTORING TOOLS-00202 1-5/8 to 4-1/4 Inches Exhaust Pipe Expander Stretcher Tool Set with Rubber Rings for Automotive Car Tail Pipe Tube Repair

  • ...s carried out by our highly qualified specialists. We test the material's strength and durability to guarantee that the tools arrive completely prepared for their intended use at the consumer's end..
  • PIPE EXPANSION KIT - This exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4" which can satisfy your needs easily and efficiently. Great for professional auto shops or home DIY..
  • CONVENIENT TO CARRY - The exhaust expander tools includes common tools needed to solve exhaust pipe expansion work. All parts are smartly placed in molded tool box for quick organization and convenient storage..
  • EASY OPERATION - Impact driven heavy-duty expander allows for fitting smaller exhaust piping and making exhaust seals. Easy to use, choose the proper collet, clamp the pipe, and then expand the pipe. Note: Use impact wrench to save even more effort..
  • PRODUCT SPECIFICATIONS - 1-5/8 to 4-1/4 Inches with a pack of rubber rings, SIZE : Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4&....
Check Stock

OMT Hex 28mm (3/4″-10 Thread) Exhaust Pipe Expander Stretcher Tool Set 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • AUTO PIPE EXPANSION KIT: This mechanic’s tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • WIDE EXPANDING RANGE: The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • EASY OPERATION: Choose the proper collet, clamp the pipe, and then expand the pipe—operation of our stretcher kit is really that simple! Use a 1/2" or 3/4" impact wrench to save even more effort. Our helpful user manual is included to guide you through the process..
  • HEAVY-DUTY CONSTRUCTION: All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" Size, 10 T Pedal Pump Included w/4 Dies and 2 Storing Cases for Copper, Aluminum Tubes in Car Repairing

  • Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Labor-saving Hydraulic System: This muffler pipe expander forces pipes to expand by using an air hydraulic mechanism. A 10-ton air hydraulic foot pump with a 6 feet high-pressure hose makes your expansion effortless..
  • Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

HHIP 3900-1625 5C Horizontal/Vertical Angle Collet Fixture

  • For any standard 5C collet For any standard 5C collet.
  • Lever movement to open or close collet. Base Size (horizontal): 5 x 4".
  • For any standard 5C collet Base Size (vertical): 5 x 3-5/8".
Check Stock

Thomegoods 2PCS 19691 1/4\ and 19693 1/2\ Router Collet fits for Dewalt 326286-04,326286-03, Hitachi 323-293,325-199, 323-421,Bosch 2610906283,2610906284

  • 1/4" Router Collet Replaces: Dewalt 326286-04 Big Horn 19691 Bosch 2610906283 Hitachi 323-293 RC025DW.
  • 1/2" Router Collet Replaces: Dewalt 326286-03,Big Horn 19693 Replace: Bosch 2610906284,Hitachi 325-199, 323-421.
  • 1/2" Router Collet fit Router Models: Bosch 1617, 1617EVS, 1618, 1618EVS, 1613, 1613EVS, 1613AEVS, 1619EVS, MRC23EVSK, MRF23EVS, MRP23EV.
  • Hitachi-KM12VC,M12SA2,M12V2,M12VC,M12SC ,KM12SC,M12VE Routers.
  • Features: | Material: Steel | Threads: M19x1.
  • Package include:1 x 1/4" Router Collet, 1 x 1/2" Router Collet.
Check Stock