HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter
- HD44780 2004 LCD 20x4 2004A Character LCD Display Module.
- Fully assembled and tested Serial LCD 20x4 Module.
ReviewsColor Lcd Module
LCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)
- With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
- At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
- This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
- The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
- 2.8 inch color screen, support 65K color display, and the display is colorful.
Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560
- IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
- Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
- Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
- With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
- Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard
- Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
- Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
- 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
- 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
- Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
ACEIRMC 4pcs HD44780 IIC I2C 1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino R3 Mega 2560
- HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight.
- HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino.
ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE UNO R3 MEGA Nano
- Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit..
- Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
- Upgraded tutorial only for R3, MEGA R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website.
- 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
- Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying..
LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)
- 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
- With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
- This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
- On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
- We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Power Supply, DPS3005 /DPS5005 Communication Version Bucks Power Supply Step-Down Voltage Converter(DPS3005-USB-BT)
- The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one.DPS3005 /DPS5005 have same functions, only the technical parameters are different,for example, voltage, current ,etc.
- This module has power-down stored function and can store 10 groups preset value.And it also has the function of extracting quickly two groups stored value. Though this module has reverse connection protection and output short circuit protection, you can muse be in strict accordance with connection description to connect. If you connect the supply power with output, the module will be burnt.
- Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required. This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied.
- LCD display on the module has the function digital voltmeter and ammeter.You can view the preset voltage, input voltage, output voltage, the preset current, output current, output power, etc.
- On the setting data interface, you can adjust over-voltage value, over-current value, o....
ACEIRMC Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino IDE R3 for MEGA2560 Nano
- Received great ideas from our customers and adopted in this upgraded kit. Removed useless modules heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc..
- Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
- Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
- Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. or download the tutorials online from the official website..
- 100% compatible with Arduino official IDE, Raspberry Pi and STM32..
Boost Buck Converter, DC 6-55V to 0-50.00V Wireless Digital Adjustable Programmable Step-Down Communication Version Buck Power Supply Module LCD Constant Voltage Buck Converter(DPS5005)
- The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one..
- This module has power-down stored function and can store 10 groups preset value..
- Compared with the traditional analog power supply, it is more convenient to quickly extract the voltage or current required..
- LCD display on the module has the function digital voltmeter and ammeter..
- On the setting data interface, you can adjust over-voltage value, over-current value, over-power value, data set and LCD brightness.This module has many advantages, small size, advanced function, good visual effect, high operability, high-precision, being used independently, being inset into the device and been widely applied..
KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast
- Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
- The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
- More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
- Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
- Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..