ReviewsCombination Drill And Counterbore

ELECTRIC DRILL to SCREWGUN CONVERTER Adjustable Clutch Drywall Tool Screw Depth Setter w/Manganese S2 Phillips 2 Screwdriver Bit | Countersink Plywood Deck PH2 Screws | 1/4 Shank Fits Corded Cordless

... ¼ quick-change shank is designed to work with POWER DRILLS or HAND DRILLS, and reduces slipping in standard drill chucks (max. 2450 RPM).
★【EASY DEPTH ADJUSTEMENT】 - Set drywall, plywood and deck screws just right for depth. Enables to sufficiently countersink and counterbore screw heads precisely into any panel products. Depth adjustment works very easily and precisely with two threaded aluminum collars, main collar works as a stopper and the locknut collar as friction lock. (Stopper collar may leave a circular mark on the piece being worked on so it is recommended to work primarily on unfinished surfaces with screw setter tools).
★【THE SCREWDRIVER BIT IS REMOVABLE AND REPLACABLE】 – No need to replace the entire tool, most standard 1/4 hex 1" bits fit in. 4pcs of 1” Phillips #2 REAL IMPACT BITS come in the package. These bits are MAGNETIZED and easy to work with. Manganese Phosphate Coated bits offer excellent wear resistance and they are corrosion proof even in humid climates..
★【BUILD-IN CLUTCH】 disengages from drive-in function while reaching the workpiece. line up the screw, put this d....

Check Stock

Drill America DEWCBR Series Qualtech High-Speed Steel Counterbore, 1/2\ Shank Diameter, 3/16\ Pilot, 5-1/8\ Length, 5/8\ Size (Pack of 1)

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Round shanks allow use with a wide variety of toolholding systems.
Counterboring is the enlargement of a portion of a hole that has previously been formed.
The counterbor is a two-piece construction, having an integral shank and counterbore-cutter, and a pilot that is interchangeable, which provides flexibility in the use of the tool.

Check Stock

Aibesy 7pcs/set Counterbore Set M3-M12 High-speed Steel 4 Flutes Straight Shank Counterbore End Mills

High speed steel, high quality and durable..
It includes 7 sizes in one counterbore set(M3, M4, M5, M6, M8, M10, M12)..
An essential hardware tool for industrial..
The counterbore set works great in counter bored hole..
Apply to cast iron, steel, copper, aluminum, conventional hardness of stainless steel and die steel, etc..

Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..

Check Stock

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..

Check Stock

Educational Insights Design & Drill Activity Center

LET'S GET BUILDING! Kids power up their imaginations and build coordination skills as they drill & play with a toy drill, and chunky, kid-sized bolts....
STEM TOYS FOR 3 YEAR OLDS AND UP! Introduce your little builders to STEM, and early math skills with Design & Drill Activity Center. Children will....
BUILD FINE MOTOR SKILLS! Aim the toy drill, twist the screwdriver, or turn the wrench from your Design & Drill Activity Center to develop the fine....
INCLUDES: 120 chunky plastic bolts, reversible power drill, screwdriver, combination wrench, 2 drill bits, and 10 double-sided, easy-to-follow design....
SPARK MORE PLAY: Keep the fun (and learning!) going with FREE Design & Drill activities developed by teachers at Educational Insights..

Check Stock

30 Flexible Drill Bit Extension Hex Shank Rotatable Joint Socket 1/4, 3/8, 1/2 Inch Hex Adapter Socket Bendable Drill Bit Extension Screwdriver Drill Bit Holder 105 Degree Angle Drill Tool

Rich combination: you will receive 1 bendable drill bit extension, 3 socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 short screwdriver bits, 1 piece 105 degree right angle drill extension, 1 socket wrench, 3 magnetic screwdriver bits and 8 hex shank impact driver socket adapters, nice combination for daily using and replacement.
Nice rocket adapter set: socket adapters set, 360 degree rotatable power drill adapters set and power drill sockets adapter set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
Applicable for standard 1/ 4 to 3/ 4 inches and metric 7 to 19 mm/ 0.3 to 0.7 inches screws.
Flexible twisted and rotated: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles, which can be attached to a drill, a charging bit or a manual wrench, thus work efficiency can be improved and productivity can be increased.
Broad utilization: this impact socket adapter set is applicable for light drilling, slow speed or s....

Check Stock

32 Pieces Flexible Drill Bit Extension Set Including 105° Right Angle Drill Attachment 1/4, 3/8, 1/2 Inch Hex Adapter Socket Bendable Magnetic Extender Universal Drill Bit Extension Screwdriver

Nice and Complete Combination: you will receive 1 bendable drill bit extension, 3 socket adapters and 3 pieces 360 degree rotatable joint swivel socket (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 short screwdriver bits, 3 magnetic screwdriver bits, 2 pieces 105 degree right angle drill extension (long and short), 1 socket wrench, 1 piece 90 degree right angle screwdriver bits soft shaft and 8 hex shank impact driver socket adapters, such a nice combination kit can satisfy your daily use.
Rocket Adapter Set: each set of socket adapters, 360 degree rotatable power drill adapter and power drill sockets adapter comes with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, and equipped with a 1/ 4 inch hex drill bit, which can be widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
Applicable for standard 1/ 4 to 3/ 4 inches and metric 7 to 19 mm/ 0.3 to 0.7 inches screws.
Sturdy Screwdriver Bit: made of quality steel, this screwdriver is practical and reliable, high strength and wear resistant.
Their Lengths are 60 mm/ 2.36 inches, 100 mm/ 3.94 inches, 150 mm/ 5.91 inches, suitable for electric and pneumatic....

Check Stock

Balande 1.5-13mm Capacity Drill Chuck, 1/2”-20UNF Mount Impact Driver Bits Chuck with 3/8\SDS-Plus Shank 1/4\ Hex Shank 1/2” Socket Square Female Adapter (SDJT 1.5-13MM 1 Packing)

1.Mount: 1/2”-20UNF, Capacity range:1.5-13mm, use on impact drills and electric power driver.
2.Come with 3/8"SDS-Plus Shank 1/4" Hex Shank 1/2” Socket Square Female Adapter.
3.professional kit drill chuck securely holds a wide range of twist drill bits, step drill bits, paddle bits and larger circular saw.The included three kinds of drill chuck extension make the converter quick connect to different driver tools.
4.Useful combination with our chuck adapter and 4 tools, you can get an useful combination and help you lock your accessory more stable, so save your time and energy to pick tools or complicated work procedure Please Note: The chuck can NOT be used counterclockwise!!.
5.Our drill chuck adapter tool suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench and some angular polishing machines.

Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
it is usually used for assembly on a milling machine..
【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..

Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....

Check Stock