ReviewsCombination Drill And Tap Sets

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

3 H.S.S. Tap & Drill Full Bundle for almost all cases..
18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.

Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

... the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.

Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
No more using a drill to drill the hole and then tapping it out later with another tool..
HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
you can use them in aluminum, plastic, wood and other thin soft material metal panel.
When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
Back taper exceeds the tap to prevent over-drilling and damage to the thread..
WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..

Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..

Check Stock

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64' Drill Combo Pack

Tap and drill Combo pack offers correct drill size for the tap in one convenient package.
Tap offers precision cut threads, accurately formed for consistent, exact threading.
Tap is heat treated and tempered for file hard threads, and longer, useful life.
Tap designed for hand cutting applications.
Drill bit made of premium grade high speed steel.

Check Stock

22 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

Nice combination: you will receive 1 piece bendable drill bit extension, 3 pieces socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable universal joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 pieces screwdriver bit sets, 1 piece 105 degree right angle drill extension, 1 piece socket wrench and 3 pieces magnetic screwdriver bit sets, nice and adequate to use in daily life.
Socket adapter set: socket adapters set and 360 degree rotatable power drill adapters set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
Suitable for standard 1/ 4 to 3/ 4 inches and metric 7 mm to 19 mm screws.
Flexible function: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles.
It can be connected to the drill, a charging bit or a manual wrench, thus improving you work efficiency.
Wide applications: this impact socket adapter set is suitable for light drilling, slow speed or screw drives, ratchet hand screwdrivers and so on, which can be applied at homes, warehouses, garages, repair shop....

Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

This tap and drill set contains a convenient HCS tap and HSS drill bit.
Self-aligning taps start and thread straight virtually every time.
Great for through holes and irregular surfaces.
Plug taps are ideal for general purpose threading.
Special chip-breaking technology cuts chips easier.

Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..

Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

[Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
[Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
[Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
[Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
[Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..

Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
Insert left-hand drill bit into drill & set drill to reverse.
Drill a hole about 1/16” deep into the screw/bolt.
Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
Use drill, wrench, or tap handle to thread the screw bolt out.
HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.

Check Stock

Inch Metric Tap Drill Sizes and Decimal Equivalents Chart Non Slip Mouse PAD

Complete full chart of drill sizes with decimal equivalents and millimeters.
Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
Made from Non-Slip Neoprene Rubber & HQ Sponge & Cloth. Perfect for Optical Mouse, Trackball Mouse, Mechanical Mouse..

Check Stock