ReviewsCombination Plunge And Bevel Bits

SHDIATOOL 7-Piece Diamond Hole Saw Kit for Porcelain Tile Ceramic Marble Brick Vacuum Brazed Core Drill Bits Set(A85458K3)

  • Products Included: 6-Piece Core Drill bits(25/35/45/51/65/76mm)+25mm Finger Bits,total 7 pieces/Box.
  • Core Drill Bits are designed for Dry/wet drilling porcelain tile, granite, marble, brick and all similar material.
  • Finger Bits are provided for enlarging, shaping or rounding bevel existing holes in Porcelain,Marble,Granite and Hard Ceramic....
  • Vacuum Brazed technology provide much longer working life,fast and smooth drilling.
  • It usually takes 5-7 business days for us to deliver them to you from China.
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

Diamond Core Drill Bits Set,BGTEC 8 Pieces Vacuum Brazed Hole Saw Kit for Porcelain Tile,Ceramic Granite Marble Stone Masonry Brick (25/35/45/50/65/75mm)

  • Products Included: 6 pieces Core Drill bits(25/35/45/50/65/75mm)+1pc 25mm Finger Bits+1pc SDS Adapter,total 8 pieces/Box.
  • Core Drill Bits are designed for Multi-purpose drilling for granite & marble, masonry, concrete, tile/ceramic, glass, hard plastic,Dry drilling without water,Use water for longer time.
  • Finger Bit: Enlarge, shape and/or round bevel existing holes in Porcelain, Hard Ceramic, marble and granite.
  • Aapter: 5/8-11 thread core bits can be fitted on hand drill or electric drill.
  • Vacuum Brazed diamond technology provide very high efficiency,cuts faster,durable and sturdy.
Check Stock

WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw

  • Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts.
  • Create 45-degree bevel cuts in boards up to 1-5/8 inches thick.
  • Perfect for ripping boards or for performing internal plunge cuts.
  • Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor.
  • Compatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw Clamps.
Check Stock

Trend MT/JIG Mortise and Tenon Jig

  • RECOMMENDED USE: Cut both the tenon and mortise with one set-up.
  • FEATURES: Allows compound angles, dowel holes and rectangle tenons.
  • COMPATIBILITY: Use with a plunge router and straight bits.
  • CONSTRUCTION: Precision cut steel plates and body.
Check Stock

Makita SP6000J1 6-1/2 Plunge Circular Saw Kit with Stackable Tool case and 55 Guide Rail Blue

  • 12 AMP motor with variable speed control dial (2,000 - 5,200 RPM) for optimum performance in a variety of materials.
  • Large cutting capacity (2-3/16" at 90° and 1-9/16" at 45°). Power Type- Corded.
  • Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°.
  • Makita SP6000J1 6-1/2" Plunge Circular Saw Kit, with Stackable Tool case and 55" Guide Rail.
  • Powerful 12.0 AMP motor for optimum performance in a wide variety of materials.
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

PEALIFE Tongue and Groove Router Bit Tool Set 1/4'' Shank+45° Lock Miter Bit 1/4'' Shank – 3 PCS, Solid Steel, Anti Kickback Design, Wood Milling Cutter for CNC, Tables, Doors, Shelves, DIY Woodwork

  • 【Powerful Motor & Variable Speed】Durable AC motor with a max horsepower of 1.6 HP delivers abundant power for a variety of routing and trimming applications.
  • The variable speed control dial (16000-30000 RPM) allows users to choose a more appropriate speed for different materials..
  • 【Precise Operation】7-stop turret combined with both macro and micro-adjustment ensures precise operation for a range of cabinetry and woodworking applications. Accepts 1/4 inch router bits with a plunge depth of up to 2” inches..
  • 【Both a Plunge and a Fixed Router】Plunging base locks in downward position for functionality as both a plunge and a fixed router.【Durable Housing & Clean Jobsite】The aluminum body and base design is built for long term durability.
  • while the hood removes dust to leave a clean work space..
  • 【Ergonomic Design】Rubber covered handle for a comfortable grip.
  • an External brush cap, making it quick and easy to replace the carbon brush.
  • The quick locking system for convenient depth adjustments and base change..
  • 【What’s Included】1 * multi-function straight-edge fence, 1 * template guide, 1 * roller circle-cutting centering pin, 1 * 1-1/2-inch dust collection duct. 【Warranty】30 day refund and one year replacement..
Check Stock