ReviewsCommercial Gas Meter

Gas Tank Fuel Gauge Meter Fits for Yamaha Grizzly 600 Big Bear Kodiak 400 ATV Gas Tank Cap Fuel Level Gauge Replacement 4SH-24260-11 4SH-24261-00

  • Fitment: The fuel gauge meter fits for Yamaha Big Bear 400 2000- 2012, fits for Yamaha Kodiak 400 1996-1998, fits for Yamaha Grizzly 600 1998 -2001.
  • Replace Part Number: 4SH-24260-11-00 4SH-24260-10-00 4SH-24260-00-00 4SH-24260-01-00 4SH242601100.
  • Measure the Fuel Level: The float of the fuel level gauge moves accurately and quickly, and it will display the remaining fuel level in the fuel tank. It is perfect for anyone who is building a custom dashboard or wants to replace their inventory fuel level gauge.
  • Durable and Rust-proof: Black aluminum bezel, polished edges, scratch-resistant curved glass lens, GUZIKO fuel meter is very fit, upgraded anti-aging and anti-corrosion seal to ensure no gas leakage or unpleasant smell, durable.
  • Easy to Replace: Use flat head screw driver to pop old ring off, push gas meter in the slot until it can't go any further, place new ring over top of meter and tighten it, the installation is complete.
Check Stock

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

  • This gas meter is connected to hose to measure unidirectional gas flow.
  • Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
  • Mainly used for detecting the flow, control flow and can be used in industry.
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

PatioGem Propane Tank Gauge, Gas Grill Gauge for 5-40lbs Propane Tank, 3 Temperatures Scale, Colored & Reliable, Propane Tank Gauge Level Indicator, Propane Gas Gauge, for Grill, Heater, Fryer, Camper

  • ...ure, air-tight connection between the gauge and propane cylinder. Just add it into the cart, PatioGem lp tank gauge will be a good accessory that helps you to know your gas level in real-time!.
  • HASSLE-FREE INSTALLATION – No tools are required and easy to install. The gas meter connects to a 5-40lb propane tank and hose of a propane appliance. It takes less than 1 minute to install. In addition, you can freely rotate the display meter to get a proper position for easy viewing..
Check Stock

Smart Meter Cover eMf Protection Home eMf Meter eMf Shield eMf Blocker for Home Adjustable Visible Faraday Cage for Smart Meter Shield

  • eMf Protection improve Your Health: Most homes and offices use a smart meter, but the electric meter transmittal gives off radio frequencies which can be harmful to health, these harmful frequencies will make us frequent headaches, recurrent ringing in the ears, inexplicable migraines and insomnia. Our smart meter cover like a hat, wear on a smart meter effectively block harmfu electromagnetic waves and radiation, forms a perfect protection at home or office..
  • Effective faraDay Cage Smart Meter cover : Smart meter cover rF radiation shield Tested and proven faraDay cage technology can effectively block harmful frequencies and harmful electromagnetic from smart meters, wifi blocker eMf shielding 99% of harmful radio frequency. modem cover meter covers to reduce exposure to harmful frequencies and block rF signals..
  • New Anti-eMf Technology : Different from the stainless steel materials of other stores, our smart meter cover adopted higher specifications of copper-nickel raw materials, which have high-density radiation protection functions for faraDay cage for wifi router and smart meter..
  • Adjustable Rope Design : Breakthrough retractable faraDay cage design. offering extreme support and shielding abilities.bottom rope for adjustment,You can easily control....
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

Manometer, 12 Selectable Units Differential Pressure Gauge, Dual-Port Manometer Gas Pressure Tester, Digital Pressure Gauge with Backlight, Professional Air Pressure Meter, Handheld HVAC Manometer

  • 【Portable Manometer with ABS Material and LCD Display】The handheld digital pressure gauge is made of ABS material, and the excellent performance of high-temperature resistance and impact resistance makes the air pressure meter have a long service life. 4.45CM×4.95CM display, support LCD backlight, convenient lighting operation, display data clearer and easier to read..
  • 【Multifunctional Pressure Gauge with Accurate Readings】The digital pressure gauge adopts a high-quality pressure sensor, which has the characteristics of high precision and wide range. High-precision ADC and low-power MCU. Maximum/minimum mode and DIF mode. Professional air pressure gauges are specially used for gas measurement and calibration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances..
  • 【Differential Pressure Gauge with 12 Selectable Units】The length of the two hoses in the gas pressure gauge set is 25cm.
  • The thread size of the barb metal connector is 1/8 inch.
  • 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²).
  • 【Manometer for Measuring Positive and Negative Pressure】There are two ports on the top of the differentia....
Check Stock

Motion Pro Tachometer Cable - Fits Honda CB500 CB550 | CB750 1969-1978

  • Manufacturers Part Number: 37-200 & 37-205.
  • Works Connection 37-200 Tach/Hour Meter/Clock with Maintenance Timer & 37-205 Tach/Hour Meter Combo Kit.
  • Clock features 12 or 24 hour operation. Works on Fuel injected/carbureted 2-Strokes/4-Strokes from 1 to 8 cylinders . Large, easy to read LCD screen in a sleek, compact design Measures up to 19999 RPM and tracks total hours up to 99999. Easy installation ( single wire lead wraps around spark plug wire ).
  • Can be mounted on any 6mm bolt ( In front of gas tank, on triple clamp, in airbox etc. ) In front of gas tank is the most common, although on some bikes that location is not possible..
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

  • NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
  • CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
  • EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
  • UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E....
Check Stock

Gas and Bung Wrench Non Sparking Solid Drum Bung Nut Wrench Multi-Pack (BLACK) (1)

  • New Black Non-Sparking Solid Drum Bung Nut Wrench.
  • Multi-Pack Listing-Package Quantity automatically calculates price. The more you buy the more you save per Bung Wrench..
  • Works on 15, 30, and 55 Gallon Drums ~ Open/Close emergency gas meter shut off valves.
  • 4-in-1 Multi-Functional Tool ~ 1. Main Wrench - Opens Fine and Course thread Bungs on 15,30, and 55 Gallon Drums / 2. Back of Wrench - Turns off Gas Meter Shut off valves / 3. Handle - Opens 3/4" bung on smaller barrels.
  • Can be used to open the 3/4" bung on smaller barrels ~ Fits most barrels and drums on the market today..
Check Stock