ReviewsCommercial Loading Dock

Vestil V-1120-4.5 Rubber Vertical Laminated Dock Bumper, 11\ Width, 20\ Height, 4.5\ Depth

  • Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

TPI Corporation 24-LDF-TE Fostoria Loading Dock Fan Head and Arm Combination – 24\ Reach Single Steel Tubing, 120V, w/2-embedded outlets, 18\ Air Circulator w/TEAO Motor

  • 24" Reach Single Square 1-1/2 inch 11-Gauge Steel Tubing with 18" fan head. Outer arm includes two embedded outlets.
  • ARM: Chip resistant safety yellow & black powder coated finish for high visibility and durability. Wall plate 3x5x3/16 mounting plate rotates 180-degs and allows for fastening (4) 3/8" bolts (not supplied) to a vertical or structural surface. Includes 5-foot long SJT 18/3 grounded 3-prong cord..
  • FAN: Contains steel construction, silver & black powder coated finish, 18-in dia. aluminum 3-paddle blade, 3-speed, 1/8-HP, 120V, cord, direct drive totally enclosed air-over (TEAO) motor generating up to 3,500-CFM’s.
  • ETL Listed for USA/Canada. Long lasting arm construction is made in the USA..
  • Where Used: Engineered for variety of applications to solve hard to cool or illuminate areas such as loading dock trailers, back dock areas, conveyor systems, personal workstations, shops, garages, processing, commercial handling or industrial areas..
Check Stock

Vestil 1224-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 24\ Width, 4.5\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil 1236-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 36\ Width, 4.5\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil 1024-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 10\ Height, 24\ Width, 4-1/2\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil FM-2572 Mechanical Edge-O-Dock Leveler, 25,000-lb. Capacity, 72\ Usable Width

  • Mechanical dock leveler for correcting height differences between truck and loading dock.
  • 18" high bumpers on each end for protecting dock and truck.
Check Stock

Discount Ramps Diamond Plate Loading Dock Board 60' x 60'

  • 13,000 lb. Capacity loading dock board designed to ease and bridge the transition from truck to dock.
  • 4,000 lbs. rated for 4-Wheel forklifts, and 2,500 lbs. rated for 3-Wheel forklifts.
  • Integrated lifting chain (sides to dock board nose) allows the plate to be moved on forks.
  • Heavy duty reinforced steel diamond plate with highly visible yellow curbs.
Check Stock

Vestil PE-2572 Electric Hydraulic Edge-O-Dock Leveler, Steel, 72\ Usable Width, 25,000-lb. Capacity

  • Electric hydraulic dock leveler for correcting height differences between truck and loading dock.
  • 18" high bumpers on each end for protecting dock and truck.
  • 1/3 HP, 115 Volt, 1 phase motor with control button for easy operation.
Check Stock

LUVERNE 2090615-3 10-Inch Universal Rubber Bumper Guard Protector Strips Loading Dock Rear Fender Pad Bump Stop, 3-Pack

  • EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers.
  • TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon.
  • VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides.
  • UNIVERSAL FIT. These rubber bumper protectors are 2-1/8 inches x 1-7/8 inches x 10 inches. They perfectly fits the LUVERNE Impact shock-absorbing rear bumper step, or they can be mounted anywhere needed.
  • HARDWARE NOT INCLUDED. The two holes in each bumper come ready to accept 1/4-inch hardware (included). Drilling may be needed on the mounting surface.
Check Stock

SEACHOICE Double-Braid Nylon Dock Line 3/8\ x 15' 40291 Black

  • 【SUPER CONVENIENCE】Perfect length keep the boat nice and snug against the dock, makes it a breeze to jump on and off boat without having to pull the boat in. Perfect for temporary docking when you docking a restaurant, getting gas at the lake, tying up to other boats or loading/unloading. If you docking your boat frequently, buy these dock lines, it is life saving..
  • 【MORE SECURE TO DOCK】Our bungee dock lines can absorb shock to boats, cleats, docks, pylons and other hardware. Boats will easy run away or beat up against the dock when use the regular rope, because waves would bump them around until the rope came loose. But our our bungee dock lines have a lot of elastic and can bump around but stay attached. They stretch enough to keep from breaking loose but not enough to hit the dock..
  • 【HAVE DUTY】Tensile strength is 2150 pounds that is able to dock boats and PWC's up to 4000 pounds, no problem keeping a 23ft boat secure to dock. A must have for boat and PWC owner. Best idea for Bass Boat, Pontoon Boat, Jon Boat, Yacht, Dinghy, Kayak, Jet Ski, Wave Runner, Seadoo ans so on..
  • 【GREAT TO TYING BOAT TOGETHER】 Benefit from the bungee, they are perfect to use for tying boats together, boats will keep co....
Check Stock

BILT HARD 5400 CFM 20 in. Outdoor Wall Mount Fan, 3-Speed Waterproof Wall Fan Industrial Grade High Velocity Outdoor Fans for Patio, Commercial, Garage, and Gazebo Use- UL Listed Black

  • 【High Velocity Airflow】: Designed with three speed setting(3000 CFM/4000 CFM/5400 CFM) with a 2ft. pull chain and sealed, permanently lubricated industrial motor, the 20 in. outdoor wall mount fan runs at Max. 5400 CFM. Ideal for industrial, commercial, residential, outdoor patio, resorts, warehouse loading dock, and workstations..
  • 【Durable and Sturdy】: Featuring a fully enclosed ball-bearing motor and powder-coated steel construction, the outdoor fans for patios protect the motor from workshop debris and all other dust. With aluminum fan blades.
  • our heavy duty commercial wall fan is water-resistant (IPX4) and outdoors rated for indoor and outdoor use..
  • 【180°adjustable tilting】: Equipped with a versatile 180-degree adjustable tilt, this 18 in. outdoor wall mounted patio fan can be angled and adjusted directly to the airflow where you need it most. Ideal for a workshop, commercial or barn, and other indoor rooms where floor space is limited or when overhead circulation is required..
  • 【Easy to Assemble & Use】: Offering versatile installat....
Check Stock