uxcell 10 Pcs Common Cathode 10-Pin 1 Bit 7 Segment 0.56\ Red LED Display Digital Tube
- Size(No INclude Pin) : 19 x 13 x 7mm/0.7" x 0.5" x 0.3" (L*W*H).
ReviewsCommon Cathode Module
Oiyagai 10 Pcs Common Cathode 10-Pin 1 Bit 7 Segment 0.56\ Red LED Display Digital Tube
- Size(No INclude Pin) : 19 x 13 x 7mm/0.7" x 0.5" x 0.3" (L*W*H).
Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components
- The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
- Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
- connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
- Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
- 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
DFPlayer - A Mini MP3 Player
- The DFPlayer Mini MP3 Player For Arduino is a small and low price MP3 module with an simplified output directly to the speaker..
- It supports common audio formats such as MP3, WAV and WMA..
- The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other....
AOICRIE 2PCS MAX7219 Dot Matrix Module for Arduino Microcontroller 4 in 1 Display with 5pin Line for Arduino for Raspberry Pi (Green)
- ★The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
- ★The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
- ★Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
- ★Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
- ★The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
ALAMSCN MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules for Arduino Raspberry Pi Microcontroller with 5Pin Wires Red (Pack of 2)
- The MAX7219 is compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs..
- Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit..
- Only one external resistor is required to set the segment current for all LEDs. A convenient 3-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display..
- The MAX7219 also allow the user to select code B decoding or no-decode for each digit..
- The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on..
IndustrialField 5PCS V60100C TO-220 V60100 TO220 Packaged Schottky diode Common Cathode 60A 100V Original Authentic
- IndustrialField 5PCS V60100C TO-220 V60100 TO220 packaged Schottky diode common cathode 60A 100V original authentic.
- Developed Countries Estimated Delivery Time: 7-17 days(trackable),Other countries Estimated delivery time : 8-30 days.----- We provide Expedited Shipping service : 3-8 days.(excluding handling time).If the order amount above US $200, we will use Expedited Shipping service for free..
- If it is not delivered within the specified time, or if it is not satisfactory. You only need to send a refund request and we will refund you in full..
- We make every effort to provide customers with satisfactory service.any question,please feel free to contact me..
DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits
- The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
- Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
- 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
- Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
- The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
EC Buying AD620 High Accuracy Low Power Programmable Instrumentation Amplifier Module Voltage Amplifier Module Differential Amplifier Single-Ended/Differential Small Signal/Small Amplifiers Module
- ...20: G=1+50K/Rg, AD623: G=1+100K/Rg ✭Maximum magnification of the module: more than 2000 times (actual measurement), due to the large gain of the waveform frequency band, it is recommended to use multi-stage amplification with high gain ✭Fixed output voltage: 5V-10V (default delivery 5V).
- ♥ Other parameters: ✭Common mode rejection ratio: AD620: 100dB (minimum, G=10).
- AD623: 90dB (minimum, G=10) ✭Input bias current: AD620: 1.0nA (max).
- AD623: 23nA (max) ✭Input offset voltage: AD620: 50μV (max).
- AD623: 200μV (max) ✭Input offset offset: AD620: 0.6μV/°C (max).
- AD623: 2μV/°C (max) ✭Input voltage noise: AD620: 9nV/√HZ (1KHZ).
- ♥Precautions: 1. The power supply of the module is a single power supply, and the voltage cannot exceed 26V 2. Since the module is a high-precision device, to avoid unnecessary interference, it is recommended to use a linear power supply for power supply 3. It is recommended to use SMA to BNC line input and output signal for the output signal. Compared with the observation effect, poor contact or inferior wire may cause signal attenuation or excessive noise..
Aideepen 5PCS DFPlayer Mini Mp3 Player Board Module Voice Decode Board Support TF Micro SD Card U Disk Audio Music
- 【Upgrade】This is a MP3 Player Audio Voice Module, can be connected directly to the speaker.GD3200B chip replacement old YX5200 (Compatibility....
- Supported Sampling Rates (kHz):8/11.025/12/16/22.05/24/32/44.1/48.
- 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB..
- The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF....
- This Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any....
- A variety of control modes, I/O control mode, serial mode, AD button control mode.-->If you need any questions, please feel free to contact us..
Bouge Charger Cord Compatible with Manscaped Lawn Mower 3.0/2.0 Best Electric Manscaping Groin Hair Trimmer, Replacement manscape 3.0 Power Cord
- ...odule. Its superiority and ease of use over outdated trimmer blades is clear. Just snap the old one off and snap the new one in, giving you a brand new trimming experience every single time you use it. It couldn’t be easier..
- ENGINEERED TO PERFORM: Ceramic blades are waterproof. Rust, shock, slipping and the other common water problems that plague electric trimmers are a non-issue. Ceramics are much more resistant to heat than steel, so when the trimmer works its impressive feat, heat won’t affect your skin. Our ceramic blades also feature QuietStroke Technology, which means reduced vibrations for reduced movement while trimming..
- COMPATIBLE WITH ALL MANSCAPED LAWN MOWER MODELS: Our SkinSafe ceramic blade cartridges are compatible with our Lawn Mower 2.0, 3.0, and 4.0 models for your convenience..