ReviewsCommon Mode Choke Cores

The Total Gun Manual: 335 Essential Shooting Skills

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Rifled for Beretta Benelli Mobil is made of high quality Stainless Steel. These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for..
  • HIGH PERFORMANCE: Carlson's Choke Tubes Rifled for Beretta Benelli Mobil 12 Gauge constricted at Rifled and measured at 0.73 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Iglobalbuy 50cc/ 80ccBicycle Engine Kit 2-Stroke Cycle Petrol Gas Motor Engine Kit for Motorized Bicycle 26\/28\ Bike (black) (80cc)

  • The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km..
  • This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation)..
  • Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
  • To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually..
  • To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started..
Check Stock

CARLSON'S Choke Tubes 12 Gauge for Winchester - Browning Inv - Moss 500 [ Rifled | 0.730 Diameter ] Blued Steel | Rifled Choke Tube | Made in USA

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Rifled for Winchester - Browning Invector - Moss 500 is made of high quality Stainless Steel. These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for..
  • HIGH PERFORMANCE: Carlson's Choke Tubes Rifled for Winchester - Browning Invector - Moss 500 12 Gauge constricted at Rifled and measured at 0.73 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Carlson's Choke Tubes Remington Delta Waterfowl Choke 3 Pack Set 12ga, Black (07269)

  • Our Waterfowl Extended Choke Tubes are manufactured from 17-4 stainless steel and designed to throw tighter and denser patterns than conventional choke tubes.
  • These choke tubes feature a 25% longer parallel section in the choke, thus throwing more consistent patterns.
  • Each choke tube is knurled on the end to allow for quick and easy removal.
  • This 3 pack set includes the close-range, mid-range and long range choke tubes with case.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Cnfaner Carburetor for Kohler K321 K341 Cast Iron 14hp 16hp Tractor Cast Iron Engine Carb with k341 Gasket kit

  • Replace Part Number: 45-053-55,4505355,45-053-55-S.
  • Replacement for Kohler K321 K341 Carburetor. This carburetor is made from cast aluminum and install easily onto your K Engine..
  • 30mm/1.2" Throttle Bore,Choke Shaft Included..
  • Carburetor for Kohler K341 K321 ,for Club Cadet 1600 1650 ,14HP and 16HP Cast Iron Engines,for John Deer Tractor 214, 300, 312, 314 & 316..
  • Please look carefully at the choke lever in the photo. We call this Choke Lever Style 1. This style choke lever is commonly used on equipment where you manually choke the engine (for Rototiller, Chipper, etc.) or the choke cable comes from above the carburetor and connects directly to the choke (fits for some John Deere Garden Tractors)..
Check Stock

CARLSON'S, Remington White Wing Dove Choke Tube, 20 Gauge, Extended Range, Improved Modified, Diameter .705, 37523

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality White Wing Dove for Remington is made of high quality Stainless Steel. Our White Wing Dove choke is manufactured from 17-4 stainless steel and has been designed to produce the best patterns for dove hunters..
  • HIGH PERFORMANCE: Carlson's Choke Tubes White Wing Dove for Remington 20 Gauge constricted at Improved Modified and measured at 0.595 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Endangered (A Joe Pickett Novel)

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Carlson's Choke Tube Remington Pro Bore 12 Gauge White Wing Dove Choke Tube, Extended Range (IM), Black

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality White Wing Dove for Remington Pro Bore is made of high quality Stainless Steel. Our White Wing Dove choke is manufactured from 17-4 stainless steel and has been designed to produce the best patterns for dove hunters..
  • HIGH PERFORMANCE: Carlson's Choke Tubes White Wing Dove for Remington Pro Bore 12 Gauge constricted at Improved Modified and measured at 0.71 diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

CARLSON'S Choke Tubes 12 Gauge for Remington [ Coyote | Diameter ] Stainless Steel Coyote Choke Tube | Made in USA

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Carlson's Coyote for Remington is made of high quality Stainless Steel. For use with Hevi-Shot, Bismuth or lead, this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes.
  • HIGH PERFORMANCE: Carlson's Choke Tubes Carlson's Coyote for Remington 12 Gauge constricted at Coyote and measured at diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock

Carlson's Choke Tubes 12 Gauge for Benelli Crio Plus [ Coyote | Diameter ] Stainless Steel | Carlson's Coyote Choke Tube | Made in USA

  • 30 YEARS WORTH OF PATTERNS: No other company like ours at Carlson's Choke Tubes with 30 plus years of experienced patterning and testing data, by analyzed thousands of load and choke combos with our proprietary software. We bring you the best and most accurate aim choke tubes for your hunting needs..
  • HIGH-QUALITY MANUFACTURED: Our high quality Carlson's Coyote for Benelli Crio Plus is made of high quality Stainless Steel. For use with Hevi-Shot, Bismuth or lead, this high performance choke tube has been specifically designed for the coyote hunter to deliver devastating downrange patterns upwards of 70 yards when shooting larger shot sizes.
  • HIGH PERFORMANCE: Carlson's Choke Tubes Carlson's Coyote for Benelli Crio Plus 12 Gauge constricted at Coyote and measured at diameter..
  • LIFETIME WARRANTY: We back all of our choke tubes with our lifetime warranty so you can focus on busting clays and filling bag limits..
  • MADE IN THE USA: All our Carlson's Choke Tubes are made, right here, in the United States..
Check Stock