ReviewsCompact Puller Tool

Gerber Gear Lockdown Pry Multitool, Silver

  • Not The Plier-Based Multi-Tool You Were Expecting. Good, That Was The Point. This Reimagined Take On The Tools You Grab Most Is Meant To Slip Easily Out Of Sight And Into Pocket.
  • This Compact Multitool Is Perfectly Sized To Always Be On Hand. Reach For The Lockdown Pry Before Work, Jobs Around The House, Or Even To Crack Open Your Favorite Brew.
  • This Low-Profile Tool Is Purposefully Pared Down So That You Can Execute Those Daily Tasks That Come Up Most Frequently: Cut, File, Screw, And Pry.
  • This Primed And Ready Compact Multi-Tool Houses A Deceiving 10 Tools: Pry Bar, Small Flat Driver, Nail Puller, Large Flat Driver, Bottle Opener, 2.5” Plain Edge Blade, Chisel Edge, Coarse and Fine File, And An Exchangeable Plain Edge no.11 Blade.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

KELEN Blind Bearing Puller Tool, Blind Inner Internal Bearing Puller,Blind Hole Bearing Puller Set, Slide Hammer Removal Tool Set 5Pcs

  • The blind bearing puller is designed for removing out blind holes bushes and bearings from blind housings without any damage of your vehicles.You can do dent repair, lock pull or bearing pull on a scooter or any small machine..
  • Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts..
  • Bearing Extractor Collets With Internal Capacity From 3/8 inches (10mm) To 1-1/4 inches (32mm),15 inches (382mm) Overall Length..
  • Blind bearing puller, blind hole bearing puller,blind inner internal bearing puller,inner bearing puller set,blind inner bearing puller set,blind bearing puller kit,blind bearing puller set,blind bearing puller tool,blind hole bearing puller set,blind hole bearing puller kit..
  • Includes puller/slide hammer, 4 adapters 12 - 32 mm and carry case.Ideal Replacement for pulling jobs.Satisfaction d. If not completely satisfied, return it to us for a no-hassle refund or credit..
  • Part number: Blind Bearing Puller Tool 5PCS.
Check Stock

Skylety Crank Remover Bicycle Crank Puller Bike Crankset Crank Arm Puller Compact Crank Puller Cycling Power Pull Crank Pulley Tool Repair Maintenance Remover for Bikes (1)

  • Durable material: crank remover is made of quality carbon steel material, adopting quenching process to make the remover stronger in hardness, causing no harm on the thread of cranks, lasting for a long time use.
  • Standard size: each bicycle crank puller measures approx. 8 x 2.4 x 2 cm/ 3.15 x 0.94 x 0.79 inches, compact size and light in weight, they allow you to store and carry outside, taking a little place.
  • Convenient usage: bike crank puller remover tool possesses a dual function removable cap, so the pulley can be applied on over-sized spindles, longer jacking rod makes it more easy to use, bringing much more convenience for your usage.
  • Necessary tool: bike crankset crank arm puller serves to separate the crank from the bike's bottom bracket, you can conveniently repair the bike by yourself.
  • Widely apply: cycling bicycle bike crankset remover functions as removing the crank arms off the bottom bracket, its removable head allows it to fit tapered type, ensuring a wide ranges of application.
Check Stock

BTSHUB 5 in 1 Ball Joint Separator Pitman Arm Puller Tie Rod End Front End Service Splitter Removal Tool Set

  • This ball joint separator tool set is designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most compact cars, mid-size cars and light pickup trucks.
  • Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • Allows for easy removal of most popular types of pitman arms, tie rods and ball joints.
  • Durable heavy duty forged tools constructed from heat-treated alloy steel with anti-rust plating finish.
  • You will get 1x Ball joint separator, 1x Tie rod and ball joint remover, 1x Conical pitman arm puller, 1x Pitman arm and tie rod end puller, 1x Pitman arm puller, 1x Well-organized plastic carry case.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

Zipper Helper Zipper Puller Helper Dress Zipper Pull Helper Back Zipper Puller 2 Hook for Boots and Dress

  • The kit includes a zipper pulls and button hook, making dressing easier for those with dexterity or mobility issues. Simple and effective, these tools simplify your routine..
  • The Button Hook with Zipper Pull Helper is great for travel as it's compact. These tools simplify dressing for those with dexterity or mobility issues, making routines easier while on the go..
  • Zipper helper pull for dresses is the ideal helper for people with disabilities or rheumatism in their hands. Zipper puller will help you in your daily life and give you more autonomy..
  • Back zipper puller is a tool for everyday life, women do not like to break their nails and dress zipper pull helper will become their best friend..
  • Zipper puller is made of high quality materials, we guarantee the Selmar zipper helper..
Check Stock

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

  • 【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
  • 【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
  • 【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
  • 【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
  • 【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.
Check Stock

Gerber Barbill Wallet - Silver [30-001571]

  • 8-in-1 multi tool: Pry bar, nail puller, wire stripper, small flat head screwdriver, large flathead driver, bottle opener, standard utility blade, cord cut notch and lanyard hole.
  • Utility knife uses full sized replaceable utility blades with locking feature to protect when not in use.
  • Dual ended design with pry bar and pocket knife to cut through rope or twine.
  • Compact and slim multi tool fits great in a pocket or tool box. Makes a perfect companion for any work job site and for the around the house projects.
  • Overall length 4.25 inches, weight: 4.2 ounces.
Check Stock

Oumers Bike Crank Puller Bike Crank Arm Remover + Bottom Bracket Remover + Allen Key Wrench +Square Head + Auxiliary Wrench, Necessary Bicycle Crank Extractor Tool Crankset Arm Remover Repair Tool Set

  • 【Value Bike Crank Removal Tool Set】: Made of high forge steel and hard plastic handle,robust and compact,handy and well appointed.
  • Specifically designed to get the cranks off and clean pedal crank for the home bike mechanic and outdoor riding, can also add it to your toolkit for occasional repair.Huge time and money saver..
  • 【Bike Crank Extractor/Puller】: Bike crank puller can be used with an 16mm spanner wrench. For work great,we recommend that you just make sure to grease the threads before taking off your cranks.Be careful not to cross thread.The crank arm puller tool set is used to remove 22mm thread/square type crank arms, not fit Octalink crankset..
  • 【Bottom Bracket Remover 】: Bike Bottom Bracket Remover can be used with either a 24mm socket, wrench or an adjustable spanner.The bottom bracket remover is used to remove bicycle bottom bracket, it is suitable for any 20 teeth spline type bike bottom bracket..
  • 【Square Head & Allen Wrench】:Bike Allen wrench is used to unscrew the screw of crank.Use a square head,allen wrench and bottom bracket remover to replace old bottom bracket.Place the bike bottom bracket remover into the crankset, then put in the square head and the allen key,use leverage to loosen the old bottom bracket..
Check Stock