ReviewsCompatible With Most Lathes

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor.
Chuck body weighs 4 lbs and is 4" in diameter.
Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal.
Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal.
Includes screw chuck, allen wrench, and a set of tightening levers.
This "C-Series" chuck is compatible with all "C-Series" jaws and accessories.

Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.

Perfect for pens, bowls, cups, chess pieces, and other small workpieces.
Fits workpieces up to 12 inches long and 8 inches wide.
3.2-Amp motor provides over 50% more power than most 8-inch wood lathes.
Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM.
Features a 2.3-Inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests.

✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

✔️WOOD BRAD POIINT DRILL SIZE: 3/8" (Diameter) x 3-9/16"(Flute Length) x 5-1/4"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

√ Screw thread pitch cutting gauge tool set..
√ Size: Metric (mm) - 60° Whitworth - 55°.
√ Typically used to check the thread size determination is correct..
√ It is most useful for checking tool angle while cutting threads in metal turning lathes..
√ The angles on the thread cutting tool is checked on the V slots in the gauge..

✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
✔️USED WITH: Use in hand drills electric drills drill presses and lathes.

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
Designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining centers.

Chucking Reamer: Size: 4mm, 5mm, 6mm, 8mm, 10mm.
tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

Rockwell/Delta 11"/14" Wood Lathe, Spindle Bearings, Set of 2.
These are for later model 46-111 lathes. They will not fit early model 14-111 lathes that used non-extended race bearings. It is recommend you measure your bearings prior to ordering.
Bearings have a 52mm OD, 25mm ID and are 15mm wide..
Replaces Rockwell/Delta Part Numbers: Delta part number: SP-5360 or 920-04-020-5360 or ND7705.

SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....