ReviewsCompressed Air Dryer For Auto Body

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 150 CFM, Good for 30HP & 40HP COMPRESSORS (with PRE-Filter)

  • NEW 150 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED ARROW PNEUMATICS WATER SEPARATOR.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 150 CFM @ 100 PSI / 1.5" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 175 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE PRE-FILTER.
  • STAGE 1: ( ARROW PNEUMATICS F329-12WF3 ) WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 3 MICRON ELEMENT, INTERNAL FLOAT DRAIN (AUTO DRAIN 5200), WALL BRACKET (DBK10) INCLUDED.
Check Stock

SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)

  • 1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
  • 175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
  • STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
  • STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
  • STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
Check Stock

1 Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator 4 Stage In Line Air Filtration System

  • 1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
  • 1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
  • 2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
  • 3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..
Check Stock

1/2 NPT MID FLOW Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Poly Bowls Great For Paint Spray And Plasma Cutter MANUAL DRAIN

  • ...ed 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1.
  • 150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..
Check Stock

3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2\ NPT, MANUAL DRAIN)

  • 1/2" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1.
  • 225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER.
  • STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS..
  • STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE..
  • STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS..
Check Stock

Van Air Systems 80-1500 D8 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 1 50 lb Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 50 CFM, 3/4\ NPT, White (Pack of 3)

  • Dew point suppression of 20⁰ F below compressed air temperature.
  • No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
  • Includes model D8 dryer vessel, model F200-55-1/2-B-MD-PD6 after-filter, one 50 lb pail of Dry-O-Lite desiccant, mounting bracket, and manual ball valve for draining.
  • Dryer vessel is constructed and stamped per the ASME Code.
  • Best for spray paint equipment, media blasting, and air tools.
Check Stock

Van Air Systems 80-1501 D12 Compressed Air Dryer, Includes 1 µm F200 Series After-Filter and 3 50 lb Pails of Dry-O-Lite Desiccant, No Power Requirement/Moving Parts, Outdoor or Indoor Installation, 100 CFM, White (Pack of 5)

  • Dew point suppression of 20⁰ F below compressed air temperature.
  • No moving parts. No power requirement. Consumes desiccant only when compressed air flows. Pressure loss of less than 1 PSI through the dryer. No purge air loss.
  • Includes model D12 dryer vessel, model F200-100-1/2-B-MD-PD6 after-filter, three 50 lb pails of Dry-O-Lite desiccant, and a manual ball valve for draining.
  • Dryer vessel is constructed and stamped per the ASME Code.
  • Best for spray paint equipment, media blasting, and air tools.
Check Stock

1/2 NPT Mid Flow Compressed Air In Line Filter Desiccant Dryer Moisture Water Separator

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" Mid Duty In Line Dessiccant Air Dryer With Poly Bowl and Visible Sight Glass..
  • 105 CFM Flow Rate 1/2" Female NPT Air Inlet port X 1/2" Female NPT Air Outlet port.
  • Designed to Dry the Compressed Air From Your Compressed Air Line, For the Best Results, Unis in Congruence With A Water Removing Filter.
  • 7 - 150 PSI Max Output Pressure 215 PSI Max Input pressure.
  • Equipped with 5oz Poly Bowl Temperature ratings between 41F thru 140F (60°C) and 2 Desiccant Bags Included.
Check Stock

Maddog Azodin Blitz 4 Electronic Paintball Gun Marker Silver HPA Starter Package - Purple / Green

  • FULL AUTO PAINTBALL GUN PACKAGE! Azodin Blitz 4 Electronic .68 Caliber Paintball Marker with Maddog's Silver HPA Paintball Gun Accessory Kit. Everything You Need to Get in the Game! Accessory Package Includes: Industry Standard 48ci/3000psi Compressed Air Paintball Tank (Shipped Empty), 200 Round Gravity Fed Paintball Loader, Safety Certified Paintball Mask, Barrel Squeegee, 4+1 Padded Paintball Harness, and (4) Standard Paintball Pods.
  • STREAMLINED, USER-FRIENDLY, LIGHTWEIGHT, DURABLE, and RELIABLE! The Azodin Blitz 4 .68 Caliber Electronic Paintball Marker is the latest and greatest from Azodin's signature Blitz series. Truly a more focused marker than its predecessor and promises an unrivaled experience. The Blitz 4 is a union of form and function that is better in every measure. Improved with a compact regulator that can do fine tuning and a screw-lock feedneck that meshes with its aggressive milling.
  • FULL AUTO ELECTRONIC PAINTBALL MARKER - Multiple Firing Modes: Semi-Auto 20 BPS, PSP Ramp 10.5 BPS, Semi-Auto 15 BPS and Full Auto 10.5 BPS - .68 Caliber - Adjustable FPS - 12" Autococker Multiphase Honed Barrel - Lightweight Body - Screw-Lock Feedneck - M....
Check Stock

INDUSTRIAL RATED Three Stage Air Drying System - Air Particulate Filter, 0.01 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/4" NPT - Auto Drain, Metal Bowl

  • New 3 Stage air drying system. (Particulate Filter, Coalescing Filter, Pressure Regulator) Does NOT include Desiccant air dryer (3/4″ NPT Measures 1.05″ outside thread diameter in linear inches).
  • STAGE 1: Particulate Filter / Water Trap with Auto Drain. Max input pressure 175PSI.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: PRESSURE REGULATOR, REGULATES PRESSURE BETWEEN 7 – 225 PSI.
  • 48CFM @ 90PSI, 175PSI Max Input Pressure, 150PSI Max Output. Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock

Maddog HK Army SABR Titanium HPA Paintball Gun Marker Starter Package - Black

  • ALL-IN-ONE PAINTBALL GUN PACKAGE! HK Army SABR .68 Caliber Paintball Marker with Maddog's Titanium Compressed Air HPA Paintball Gun Accessory Package. Titanium HPA Kit Includes: Industry Standard 48/3000 Compressed Air Paintball Tank (Tank Ships EMPTY - Must Be Filled Prior to Use. Brand/Color May Vary), 200 Round Capacity Paintball Loader, Safety Certified Single Pane Anti-Fog Paintball Mask, 6+1 Paintball Harness, (6) Paintball Pods, and Barrel Squeegee (Paintballs Sold Separately).
  • HK ARMY'S ULTIMATE ENTRY-LEVEL PAINTBALL MARKER - Composed of a robust, high-grade aluminum body - Minimal Maintenance made easy with the quick release Delrin bolt that can be removed and re-inserted in a matter of seconds. The patented internal gas through grip gives a more ergonomic feel while holding the SABR and making the marker more streamlined. The SABR is compatible with either CO2 or compressed air depending on your air system and what is available at your local field..
  • HK Army SABR Semi-Auto .68 Cal Paintball Marker - Quick release Delrin bolt for easy cleaning and maintenance - Ported / Honed 12" Autococker threaded one-piece barrel for increased accuracy (Bore size 0.685) - Double finger trigger with safety switch - Adjustable secure clamping feed neck - Paten....
Check Stock