ReviewsCompressed Air Fittings And Adapters

Robinair 10102 Side Can Tap for R12 and R134A Air Conditioning Refrigerants and Oils

Provides a quick and hassle-free way to connect to a can of R12 or R134A refrigerant, oil, or additive when working on automotive air conditioning systems.
Built-in, hinged can adapters allow use with multiple can sizes - even the small oil charge cans.
Tap includes standard male R12 and R134A fittings for easy hook up.
Schrader valves on fittings prevent leakage and allow for storage of partially used cans.
Crafted from a durable, super rigid plastic with a metal hinge pin that adds additional strength at this critical location.

... 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035).

> [COMPATIBLE]: Replacement Part for Soft Nose O-Ring on Propane P.O.L. Fittings. Suitable for propane adapters, pipe connectors, elbow sealing....
> [EASY INSTALL]: If your adapter O-ring is defective or has been used for a long time, it is easy to repair. It is recommended to lubricate them with....
> [FEATURE]: Gasket can avoid leakage of thread seal. If the sealing ring is worn, aged or compressed, it will cause leakage of dangerous gas. As long....
> [PREMIUM QUALITY]: Strict quality control standards to Build and test. Pretty easy to snap into place. Not OEM but fits OEM Standards, the quality....
> [Guarantee and Service]: The Propane Gas Patio Heaters kit completed with a One-year Warranty. Save much money off dealer prices. If the kit once....

MaxLine COMPRESSED AIR TUBING piping system Master Kit 3/4" pipe x 300 FT M7580.
FREE SHIPPING - FREE SHIPPING - FREE SHIPPING - FREE SHIPPING.
kit includes 3/4" x 300ft tubing + cut & bevel tool - 3 Air outlet kits - 2 Tee fittings.
one 3/4" Maxline tubing x 3/4" Male NPT fitting - 20 mounting clips.
3/4" TUBING - 300FT total tubing length - Rated for any 10hp application and under.

... All metal parts are solid lead-free brass, certified to contain less than 0.25% lead. Hose is Insta-Grip, 3/8" nominal diameter, more pliable and kink-resistant than other air hoses, made in USA..
Suitable for use as an air compressor hose (compressed air hose), water hose, and hydraulic hose up to 250 psi. Always wear eye protection when handling compressed gases or fluids..

... All metal parts are solid lead-free brass, certified to contain less than 0.25% lead. Hose is Insta-Grip, 3/8" nominal diameter, more pliable and kink-resistant than other air hoses, non-conductive, made in USA..
Suitable for use as an air compressor hose (compressed air hose), water hose, and hydraulic hose up to 250 psi. Always wear eye protection when handling compressed gases or fluids..

Includes 4 pieces adapters. Pressure washer quick connect fittings make it easier and faster to setup and takedown the hose..
Pressure washer adapters are used for power washer gun, hose and pump connections..
M22 14mm thread fittings are well made. Advanced technology to ensure the high precision of thread and no leaks..
3/8 Inch quick connect fittings are great for snap. Very smooth to attach and release..
Made of brass, high build quality ensures long life. Max pressure is 4500 PSI. Max working temperature is 300 °F..

【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....

2 3/16-Inch tubes with brass fittings.Measure duct pressures to balance air flow.-60.0" WC to 60.0" WC range.
2 3/16-Inch to 5/16-Inch tube adapters - RMA316. Resolution down to 0.01" WC for static pressure measurement.

ENGINE CYLINDER LEAKAGE TEST: JIFETOR cylinder leak gauge set is designed to detect a variety of common engine faults including: worn piston rings,....
WORKING PRINCIPLE OF LEAKDOWN DETECTOR: Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed into....
DUAL PRESSURE GAUGES ASSEMBLY: There are American style air plug, pressure regulating valve, aluminum manifold body, cylinder pressure gauge, cylinder....
3 ADAPTERS AND OTHER PARTS: There are 3 sizes adapters brass coated aluminum 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be....
SATISFACTORY CUSTOMER SERVICE: Please unscrew the adapter after the cylinder is cooled to prevent the hose from softening and not driving the adapter....

ENGINE CYLINDER LEAKAGE TEST: JIFETOR cylinder leak gauge set is designed to detect a variety of common engine faults including: worn piston rings,....
WORKING PRINCIPLE OF LEAKDOWN DETECTOR: Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed into....
DUAL PRESSURE GAUGES ASSEMBLY: There are American style air plug, pressure regulating valve, aluminum manifold body, cylinder pressure gauge, cylinder....
3 ADAPTERS AND OTHER PARTS: There are 3 sizes adapters brass coated aluminum 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be....
SATISFACTORY CUSTOMER SERVICE: Please unscrew the adapter after the cylinder is cooled to prevent the hose from softening and not driving the adapter....