ReviewsCompression Fitting Adapter

EK-Quantum Torque Rotary 90° - Black 90 Degree Fitting

  • EK-Quantum Torque (Adapter Fitting) is a revolvable angled (90°) adapter fitting with G1/4" threads..
  • In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint..
  • This Quantum Line adapter is made out of CNC machined brass while the seal is made by quality rubber O-rings. It is an extremely secure and sturdy....
  • The adapter allows for connection of fitting with G1/4" threads to extend tubing possibilities in your water cooled system allowing for easier bends....
  • The outer diameter measures 23mm while the installed height is 31.5mm..
Check Stock

Northern Brewer Deluxe Homebrew Starter Kit, Equipment and 5 Gallon Recipe (Fresh Squished IPA)

  • A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
  • Made in the USA (Michigan) from pure 3/8” copper tubing..
  • Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
  • Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
  • The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
  • It can easily connect to your kitchen sink with a sink adapter (not included).
  • 9" x 4.25" 18" (coil diameter x coil height x inlet height.
Check Stock

Air Venturi Foster Female to 1/8-Inch BSPP Male Quick-Disconnect Adapter, 5,000 PSI

  • QUICK-DISCONNECT ADAPTER: Add this foster female quick-disconnect adapter to your air-hose fittings to give your air guns more pressure and power! This adapter works with a variety of PCP air guns to keep you prepared for your shooting sessions..
  • VERSATILE ADAPTER: This air-fitting adapter has a universal-fitting design that lets you connect your air gun to this quick-disconnect piece. It works with a 1/8-inch BSPP male adapter and has a maximum pressure of 5,000 psi..
  • COMPACT PCP ADAPTER: Our adapter air fitting is compact enough that it won't get in your way when you need to refill your high-pressure air guns. Take this small adapter anywhere you go, and attach it to a variety of PCP guns whenever you need to!.
  • EASY TO USE: To begin using your quick-disconnect adapter, simply hook up your adapter to your PCP guns. It includes an easy-to-install flow restrictor, and it fills your air guns slowly while reducing the heat build-up in the cylinder..
  • AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

Aupoko R12 R22 to R134a Adapters, R134A Refrigerant Tank Adapter Kit with Valve Core Remover, 1/4' Male to 1/2' Female, 1/4’’ SAE Female X 1/2’’ Male Refrigerant Tank Adapters

  • ★ FITMENT ---- R134A to R12 fitting adapter refrigerant tank, perfect fit for air conditioning refrigerant system..
  • ★ PREMIUM QUALITY ---- The R134A brass vacuum pump adapter is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ EASY INSTALLATION ---- R134A adapter is quick and easy to install, secure fitting, no-leak connection..
  • ★ DIMENSION ---- 1/4" Male to 1/2" Female, 1/4’’ SAE Female X 1/2’’ ACME Male R134A adapter fitting with valve core..
  • ★ 1 YEAR WARRANTY ---- Order r134a adapter fitting from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

GlowShift Diesel Gauge Package Compatible with Ford Super Duty F-250 F-350 6.0L 7.3L Power Stroke 1999-2007 - Tinted 7 Color 60 PSI Boost, 2400F EGT & Transmission Temp Gauges - Tan Triple Pillar Pod

  • ...a Factory Color Matched Tan Triple Pillar Pod, Tinted 7 Color Series 3 Gauge Diesel Set, Boost MAP Line T-Fitting Adapter, 3 Gauge Power/Sensor Wiring Harness & an Installation Guide that Walks Users Through the Process of Installing the Gauges, Sensors & Pod Step-By-Step.
  • Includes 60 PSI Boost Gauge with 1/8-27 NPT Compression Fittings, 9' Nylon Boost Hose & Boost MAP Line T-Fitting Adapter - 2400°F Pyrometer EGT Gauge with 1/8-27 NPT EGT Probe with 3' of Wire, 6' Sensor Harness & 2' Power Harness - Transmission Temperature Gauge with 1/8-27 NPT Temperature Sensor & 2' Power/Sensor Harness - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes.
  • Factory Color Matched Tan Triple Pillar Pod for 1999-2007 Ford Super Duty 7.3L 6.0L Power Stroke F250 F350 Trucks Mounts 3 Gauges to the Truck's A-Pillar - Overlay Design Mounts Pod on Top of the Factory A-Pillar - Manufactured from ABS Plastic - UV Protected - Includes Mounting Hardware.
  • Includes Ford Super Duty 7.3L 6.0L Power Stroke Installation Guide Complete with Step-By-Step Instructions & Photos that Help Walk You Through the Process of Installing & Wiring this Diesel Gauge Package to Your Truck.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifet....
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock