ReviewsCompression Ring Removal Tool

Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools

  • 【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys.
  • 【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool.
  • 【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal.
  • 【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors.
  • 【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices.
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression plates by flipping the switch on the handle.
  • EASILY RESET YOUR BRAKE CALIPERS AND PISTONS: Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity.
  • BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum stre....
Check Stock

Q Grips Ear Wax Remover Soft and Flexible Spiral Ear Wax Removal Kit with 16 Pcs Spiral Replacement Heads, 4 PCS Dual-Head Ear Picker, A Three-Ring Ear Cleaner Tool, Suitable for Adult & Kids

  • SAFE SOFT SILICONE EAR CLEANER: Our Q-grips handle ear cleaner is made of ABS. 16 soft and flexible replacement tips are made of silicone that is designed with 3 cm(1 spiral) elastic material to ensure painless and safe ear wax removal experiences..
  • New Great Solution:The ear wax removal tool offers a great solution to your ear wax problems, so we designed four varity ear cleaners for different people, For sensitive ears or kids, we recommend using silicone Q-grips, it help you maintain a clean & healthy ear canal. For not sensitive ears or adult, we recommend using silicone Q-grips earwax remover or metal spring spiral and three ring tool. If you're still worried not remove impacted ear wax, You can try using dual-head internal cleaner..
  • 4-1Kit Realy Works:designed according to type of earwax, The earwax removal tool including Q-grips ear canal cleaner、dual-head internal cleaner、spring spiral And three ring cleaner. If you have oily earwax, the spiral tip of q grip cleaner can absorb and pull out oily ear wax in your ears easily. If you have oily or dry earwax, dual-head spiral design Both can clean your ears thoroughly..
  • EASY TO USE: Gently and slowly insert the tip into the outer ear canal and twist only in direction indicated by the arrow on han....
Check Stock

J-Kare 6 Pcs SIM Card Ejector Tool - Sim Tray Removal Tool Pin Needle Opener Ejector, Compatible with All iPhone, Android Devices and Other Smart Phones with Red & Black Silicone Case

  • [Package Includes]: You will get 6 pieces of Sim Card Removal Tool in 2 colors, namely Red and Black, 3 pieces of each color.
  • [Portable]: The Sim Card Removal Tool is equipped with a Silicone Case along with a key ring, which can not only avoid the losing or breaking but also convenient to carry.
  • And with a detachable key ring, you can attach it to the keychain and it is easier to find it when you need it.
  • [Easy to Use]: You only need to align the Sim Card Removal Tool with your SIM card eject slot, push it to eject the SIM card slot, your SIM card will be ejected from the device, simple and convenient to use.
Check Stock

ATPEAM Overhead Valve Spring Compressor | Universal Automotive Engine Removal Repair Install Tool

  • The ATPEAM universal overhead valve spring compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem seal replacement on many cars, vans, & light trucks.
  • Constructed of quality carbon steel for durability and longevity.
  • strong bearings provided to withstand high force to easily compress springs.
  • coated with zinc and black oxide, this valve compressor tool is resistant to rust and corrosion.
  • Easily remove valve springs in passenger and light commercial vehicles with this valve spring tool.
  • This compression tool works on foreign vehicles, domestic vehicles, and vehicles with dual springs and inner and outer springs.
  • Compressing springs can be difficult and dangerous, but this spring compressor features two different length jaws grips that easily attach to the valve spring for a secure hold on the part.
  • The overhead design allows you to easily attach the valve tool to your valve springs without having to take the cylinder head from the vehicle for quick removal and installation.
  • Package: 1 x Overhead Engine Valve Spring Compressor Tool.
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

383EER4001A Washer Inner/Outer Tub Spring Expansion Tool by Beaquicy - Replacement for L-G Samsung Washing Machine - Solid Metal Washer Spring Expansion Tool can spread to a maximum of 4.3 inches

  • ✅ 【THREE YEAR WARRANTY】— The item 383EER4004A Washer Spring Removal Tool supports 3 YEAR return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
  • ✅【PRODUCT SPECIFICATIONS】 — ①383EER4001A Spring Expansion Tool ergonomically detailed design, easy to use, labor-saving, one-piece molding without solder joints, stretch distance increased to 4.3 inches.②This tool is used to remove or install the outer retaining ring. The bellow clamp removal tool releases the tension of the door boot spring clamp for easy removal.This part is also known as a washing machine bellow clamp removal tool, door boot clamp removal tool, clamp pliers..
  • ✅【UPGRADED MATERIALS】 — 383EER4001A Spring Expansion Tool applying advanced carbon steel structure, good rigidity, light weight, anti-deformation and anti-corrosion. Comfortable and non-slip handle to keep stable and safe. The galvanized surface to prevent rust and the built-in spring makes tools more flexible to remove & install inner and outer tub seal ....
Check Stock

MENKEY Terminal Removal Tool Kit for Car, 39 Pieces Wire Connector Pin Release Key Extractor Tools Set for Most Connector Terminal

  • Package Include- This pin removal tool kit includes 12Pcs Single Pin Extractor, 20Pcs Double Pin Extractor, 1Pcs Three Pin Extractor, 6Pcs Casing Tool.
  • High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors.
  • Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
  • Wide Application -The electrical pin removal tool kit includes 39 Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances).
  • Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry.
Check Stock

Car A/C Repair Kit - O-Ring Set + AC Valve Cores | Fix Air Conditioning | + Removal & Install Tool | R12 & R134a | - Also for Tire Valve Stems!

  • Save Money: Included in this bundle is a 270pc O-Ring assortment and an air conditioning valve core kit with a valve core removal kit.
  • Easy Storage: Both the O-ring and valve core containers are thin boxes that can be packed up easily.
  • Universal Fit: The valve core kit includes various sized valve cores that will fit many brands of cars.
  • Multi-purpose: O-rings are great for many things such as plumbing, vehicle repair, or other mechanic work.
  • Removal Tool: Each kit comes with a helpful valve core removal tool.
Check Stock

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

  • Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
  • Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
  • Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
  • Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
  • Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..
Check Stock

PERA Beer CO2 Keg Regulator Beer Regulator with Safety Pressure Valve, CGA-320 Inlet for Beer Brewing Wine Making

  • 【NO LEAKS】Quality material prevents leakage excellently..
  • 【KEGGING NECESSARIES】Necessary for home kegging systems..
  • 【MATERIAL】Durable rubber, silicone and hard plastic, can be used for long time, easy to clean..
  • 【PACKGE】8 * Ball lock keg post gasket, 8 * Dip Tube Gasket, 4 * Carbonation keg lid closure gasket, 1 * o-ring gasket removal tool..
  • 【COMMONLY USED GADGET】These o-rings are used for ball lock keg post, carbonation keg lid, Cornelius Keg Dip Tube. Plastic o-ring removal tool helps you remove o-rings without scratching carbonation tools and breaking o-rings..
Check Stock