ReviewsCompressor Cylinder

Wolo (858-C) Tornado Heavy-Duty Compressor

• Replacement compressor that is designed for applications that require filling large volume air tanks, up to 2.5-gallons.
• The tank recovery time is shorter because of the high volume output the pump produces, 2.55 CFM.
• The compressor is equipped with an extra-long stainless steel feeder hose that allows for easier installation.
• The pump's cylinder and head have been designed with cooling fins that allows the compressor to have a 33 percent at 100-PSI duty cycle that.
• The compressor's heavy-duty 12-volt motor is balanced to precision and there is heavy rubber bushing mounted into the base to virtually eliminate all vibration.

KK-4835 Compressor Piston Kit - Connecting Rod Replacement Kit Perfectly Fits for Craftsman Devildiss Dewalt Porter Cable Oil Free Air Compressor Pump, Comparable to KK-4835 KK-5081 A02743

• ...320 919.152811 919.152813 919.152921 919.152931 919.155730 919.166330 919-165310, 919-165330..
• 【High Performance】Direct replacement for KK-4835 KK-5081 & A02743 both in quality and functions. Specially designed to easily & properly service the oil free air compressor pumps for DeVilbiss and the most current style coated cylinder sleeve, extend the life of the compressor..
• 【Package Includes】1 x Connecting Rod, 1 x Piston Ring, 1 x Cylinder Sleeve, 2 x O-Ring that go on the valve plate and cylinder. This KK-4835 Piston Kit is new and never been used..
• 【Superior Material】Made from solid 6061 Aluminum, CNC process precision manufacturing, impact-resistant, corrosion and wear resistance, features with the capability of handling literally tons of pressure, ensures long term reliable service..
• 【100% Satisfaction Guarantee】If you're not satisfied with our Heavy Duty Replacement Compressor Connecting Rod Kit KK-4835, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will pro....

Senco PC0947 18-Gauge Brad Nailer Compressor Combo Kit

• 18-gauge brad nailer and 1-gallon compressor combo kit.
• Nailer: adjustable depth of drive, rear exhaust, easy-open latch, no-mar pad, low-load-indicator.
• Includes nailer, 1/4-inch -by-25-foot hose, safety glasses, fittings, oil, 1,200 brad nails, wrenches, and manuals.

KIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.

• ...oving valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
• Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
• Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.
• Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
• Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
• Ideal for removing valve springs, spring retainers by compressing the valve sp....

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

• Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
• One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
• Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....

Can Crusher, Pneumatic Cylinder Can Crusher for Soda Beer Eco-friendly Recycling Tool (Silver)

• Robust cylinder and metal frame for any aluminum can crushing.
• Plug and Play air fitting for you to connect to your compressor, easy to operate.
• 90 to 120 PSI working pressure to crush all kinds aluminum can.
• Bore ID of Cylinder: 2.48 inch Stroke of Cylinder:7.9 inch.

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

• ...ge: 12V storage battery drive（battery is not included）, Power: 550W, Working Pressure: 0.8MPa / 8bar / 110psi, Flow Charging Rate: 60L/min.
• 2.0cfm, Type: Oil-free pump, no need any lubricate oil to take in, Receiver tank: 10 liters stainless steel..
• Working process: Atmosphere air is sucked into cylinder of the compressor, and compressed to reach 0.3mpa – 0.8mPa / 40 psi – 110 psi pressure, through regulator with water separator , then purified by filter. Discharge clean air for diving breathing..
• Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
• 10-15 meters for both if connects to two hoses..
• Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , bearing et....

SLAIR Can Crusher, Pneumatic Cylinder Can Crusher for Soda Beer Eco-friendly Recycling Tool (Black)

• Robust cylinder and metal frame for any aluminum can crushing.
• Plug and Play air fitting for you to connect to your compressor, easy to operate.
• 90 to 120 PSI working pressure to crush all kinds aluminum can.
• Bore ID of Cylinder: 2.48 inch Stroke of Cylinder:7.9 inch.

Senco PC1010 Compressor Cylinder Sleeve - 3201068

HQLESHUI Piston Ring Compressor Tool Set, Car Engine Piston Ring Compressor Tool & Piston Ring Pliers with Adjustable Safety Screws

• Material: Carbon Steel (Plier) / Strong Spring Steel (Compressor) . carbon steel for corrosion resistance and comfortable vinyl-dipped handles..
• Size: 3 inch piston ring compressor: 53mm - 175mm.
• 4 inch piston ring compressor: 60mm - 175mm；6 inch piston ring compressor: 60mm - 195mm.
• Piston Ring Compressor and piston ring pliers.Piston ring disassembly process, expanding the piston rings.-- Piston installer plier used for installs and removes piston rings.
• Perform engine rebuilds and use this compressor for proper installation of the piston and rings in the cylinder without twisting or damaging parts.
• Perfect fit on the piston and a positive locking action to compress rings and allow installation of pistons into cylinders.
• We offer a 6 month warranty . The warranty starts from the date of the original purchase. We are happy to replace any faulty items with a new one. 1 click refund for our valued customers in 3month.If you are satisfied with the parts,please leave us your approval mark..

Air Compressor Silencer Filter Metal Air Compressor Intake Filter Sound Muffler Silencer 20mm Thread (1/2\PT 20mm)

• 【Sturdy Structure】Equipped with an iron construction with cast cylinder sleeves, this pump head is designed for a long time use and is easy for maintenance..
• 【High Efficient Work】Max air delivery of 8.8 CFM, two mufflers with two high efficiency intake filters and V-style cylinder design for superior cooling, reduces moisture and extends the life of the air compressor pump..
• 【Oil Viewing Window】By observing the oil viewing window, it can monitor the oil capacity inside the machine in real time, and control the amount of oil when you adding the air compressor oil..
• 【Smooth Operation】The proven belt driven design is great for excellent compression & smooth running..
• 【Recommended Use】With the high exhaust efficiency, low noise, smooth operation and less fuel consumption, it’s the best choice for you..