ReviewsComputer Case Cooler

Scythe Kaze Flex Slim 120mm RGB LED Fan PWM 300-1800RPM No Controller Included Single Pack

  • Slim design only 15mm thickness(17mm with Anit-Vibration Rubber), this thin fan is ideal for SFF computer(HTPC, Mini-ITX case) or low profile CPU....
  • Newly designed blade and frame contribute high airflow with low noise, ideally for computer case, radiator/heatsink and CPU cooler. PWM control offers....
  • Using Sealed Precision FDB for long life span and quiet operation.Included antivibration rubber pads covering each corner of frame. These decouplers....
  • 8 high quality LEDs built into central hub, the lighting is bright and even reflected with milky-white blade. The 4-pin 12V RGB connector allows fan....
  • Connector: 4-Pin, Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan speed: 300±200~1800±10% RPM, Airflow: 8.28~50.79CFM, Noise:....
Check Stock

Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan - PWM Cooling Fan - Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case

  • ...itch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote..
  • 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the computer case..
  • 【Top Bearing Technology】Hydraulic bearing with longer service life to reduce noise and improve heat dissipation efficiency. Lifetime 30,000 Hrs. Wireless RGB controller, more advanced wireless control dimming technology than infrared, you can still switch the light mode without aligning the light source..
  • 【Sync with Motherboard’s RGB/ARGB Port】12V RGB sync and 5V ARGB sync connector, 4 pin PWM power connector. Please connect the fan ARGB connector with control box one by one. To avoid making reverse connector, please follow the silk mark instruction strictly when you insert the connector to the control box. Suitable for liquid cooler and support 120/240/360mm radiators. (CPU Cooler/Computer Case/GPU etc).
Check Stock

Anmbest 2PCS DC 24V 0.1A 4020 Silent Brushless Blower Radial Cooling Fan 2 pin Brushless 4CM Fans 40mm X 40mm X 20mm for Computer Case 3D Printers Parts

  • Black Plastic Brushless 40 x 40 x 20mm/ 1.57″ x 1.57″ x 0.79″ (L*W*H) DC 24V 0.1A BRUSHLESS DC Blower FAN.
  • Provides excellent air ventilation for your PC Computer Case, CPU Cooler, VGA Cooler and other matched radiator..
  • The product provide large air volume, large wind pressure, low noise, long life,even better stabilisation, precision and durability..
  • DC 24V 0.1A powered with 2.5mm pitch 2 pins connector easy to be connected with your computer motherboard or 3D printer power system..
  • This cooling fan can help draw in fresh cool air and push the hot air out. It looks cool and easy to assemble or maintain..
Check Stock

Vetroo MESH6 Mid Tower ATX PC Gaming Case, 6X 120mm ARGB Fans Pre-Installed, Controller Hub Included, Mesh Front & Tempered Glass Side Panel Computer Cooling Case

  • 【UNIQUE PANEL DESIGN】The diamond-shaped mesh front panel and transparent tempered glass side panel make your case distinctive, and improve the airflow performance..
  • 【6 ARGB FANS】Pre-installed 4pcs 120mm ARGB fans in the front and 2pcs fans in the rear, provide your case the excellent cooling, colorful lights and unlimited color transformation..
  • 【CONTROLLER EQUIPPED】The controller can control 6pcs pre-installed fans. With 5V ARGB interface, it can be connected to the motherboard to synchronize light effects..
  • 【SUPERIOR COOLING SOLUTION】The case supports up to 10pcs Fans at the same time, It also has room for up to 240mm/280mm water cooler on the top and 120mm water cooler on the rear. Provide the best airflow and keep your case cooling all the time..
  • 【SUFFICIENT INTERNAL SPACE】Compatible with ATX, Micro-ATX, Mini-ATX motherboard, support Max CPU height of 165mm and GPU length of 350mm, it can install 3 SSD drive and 2 HDD for your computer..
Check Stock

ZEUS GAMDIAS CPU Liquid Cooler 360mm with 3X 120mm PWM Dual Ring RGB Fans, ARGB AIO Lighting Liquid Cooling Kit, All-in-One CPU Water Cooler with 360mm Radiator with Remote and Hub, CHIONE P2-360R

  • Addressable and Remote RGB Lighting Control: GAMDIAS liquid cooling kit offer both solutions of aRGB Sync and Remote RGB solution. it allows user to sync the RGB lighting effect with your motherboard or a simple remote. The ring RGB effects on the pump can also be done by both solutions.
  • Rual Ring RGB PWM Computer Fans: GAMDIAS CPU water RGB cooler comes with 3 dual ring aRGB 120mm PWM computer case fans which give you the immersive gaming experince. The cooler comes with a hub to extend the RGB extendibility for your gaming computers.
  • Sync with Differnent Motherboard with One Click: The AiO RGB CPU Liquid Cooler supports motherboard sync through the mobo software with address header. ASUS AURA, GIGABYTE FUSION, MSI MYSTIC, ASROCK POLYCHROME, BIOSTAR VIVID LED DJ.
  • CPU Socket Compatibility: Intel LGA2066, LGA2011-v3, LGA2011, LGA1200, LGA1151, LGA1150, LGA1156, LGA1155.
  • AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1 (Note: No AMD backplate in the package, The AMD must be installed with the original bracket of motherboard).
Check Stock

Marame 2PACK 120mm Fan 1500RPM 120mm x 25mm 12V Ventilation Long Life Sleeve Bearing Computer Case Fan High Performance Cooling Fan for PC Case Server Inverter Frequency Converter Cooler

  • ♥ 【2PACK 120MM FAN 1500RPM】: 120x120x25mm / 4.7x4.7x1in. Voltage: 12V.
  • ♥ 【EASY 2PIN CONNECTOR】: 2.54mm Male Power Supply interface. RED Wire is Positive.
  • ♥ 【COME WITH METAL GRILL AND SCREWS】: it can protect fingers and fan blades.
  • allows the fans to be laid flat or stand upright..
  • ♥ 【TWO WAY INSTALLATION】: Push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of....
  • ♥ 【WIDELY APPLICATIONS】: Cooler for Power Supply / PSU / RV fan / PC Computer Case / Server / Household Electrical Appliances / Industrial....
Check Stock

Scythe Ninja 5 120mm Air CPU Cooler, Intel LGA1151, AMD AM4, Dual Silent Fans, Black Top Cover

  • Tower cooler with 2 Kaze Flex 120 PWM fans at max speed of only 800 RPM, the push-pull configuration ensures cooling performance and efficiency at low noise level..
  • Cutout on the fin stack(55mm clearance) for better clearance of RAM, even in LGA2011(V3) / 2066 motherboards. Overall height is only 155mm, the cooler fits most tower PC case on the market..
  • H.P.M.S III is easy-to-install and secure for INTEL LGA 775, 1150/1151/1155/156, 1366, 2011(V3) Square ILM, 2066 & AMD AM4, AM3(+), AM2(+), FM2(+), FM1. This mounting system gives precise contact pressure to CPU and support most popular sockets..
  • Massive heatsink(130*X130mm) constructed with 6 x 6mm heatpipes and copper base to maximize heat transfer and dissipation from CPU, it is potentially be fanless solution as complete silent computer. Ideally to use for mainstream, gaming, overclocking computer with high TDP processor (9900k, 9700k, 9600k).
  • Product dimension: 137x155x182mm(W x H x D), Weight: 1190g. Included Y fan cable for installing both fans on same CPU fan header..
Check Stock

Scythe Kaze Flex 140mm Fan, PWM 300-1800RPM, Quiet Case/Radiator Fan, Single Pack

  • 140mm PC fan with standard mounting space, the fan is ideal for computer case ventilation and water cooling radiator..
  • Sealed Precision Fluid Dynamic Bearing: the bearing and the spindle are made of high quality compressed metal and are lubricated by a special oil film resistant to temperatures of up to 250C° / 480F°. This drastically reduces friction, ensuring smooth operation and reduced wear, which results in long life span and silent operation..
  • Included antivibration rubber pads covering each corner of frame. These decouplers effectively reduce possible vibrations and allow silent operation..
  • Newly designed blade and frame contribute high airflow with low noise, ideal thermal fan for computer case and CPU cooler/heatsink. PWM control offers wide range fan speed for various application and system..
  • Connector: 4-Pin, Dimension: 140x140x25mm, Fan speed: 300±200~1800±10% RPM, Airflow: 16.8~100.8CFM, Noise: 4.19~26.45dBA, Static Pressure: 0.08~2.81mmH2O, MTTF: 120,000hrs.
Check Stock

Vetroo K2 M-ATX Mid-Tower Pc Gaming Case, Pre-Installed 200mm RGB Fan, High Airflow Round Computer Case, Water Cooler Ready, Black

  • ...ibility for various mobile audio accessories and change the RGB of fan..
  • Sufficient Internal Space: It supports M-ATX, Mini-ATX motherboard and Max 165mm CPU height and Max 320mm GPU length. This case is a good choice for your accessories..
  • 2x SSD Drive Bays: The case can support 2pcs 3.5" SSD drive bays, making your computer running faster, and you don’t have to worry about computer freezing anymore..
  • Drawer HDD Bay: The HDD drive bay of drawer type doesn’t need screws to install, which can greatly save your installed time. it's convenient to manage cable and make your case clean..
Check Stock

| Continuous Power | Intel 4th Gen CPU Read, SLI & Crossfire Ready

  • Stylish and Neat Design for a computer gaming case: ROSEWILL NAUTILUS comes with a magnificent design with Blue LED fans in the front. It offers not only the ultimate gaming experience but also the supreme glance for your desktop..
  • Multiple I/O Ports and Tool-less Design docking station: With Top-mounted I/O Ports – USB 3.0 x 2, USB 2.0 x 2, Audio In/Out, the gaming mid-tower gives users the best convenience to their gaming system and the Tool-Less Design of 3.5″/5.25″ HDD station offers the ease of use to access the PC.
  • Dimension (H x W x D: inch/cm): 19.69 Inch x 7.64 Inch x 17.72 Inch.
  • Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX.
  • Optimized Ventilation: 3 Pre-installed Fans, including two 120 mm Blue LED Fans in the Front and one 120mm Fan in the Rear offers excellent airflow makes it an outstanding ATX gaming case. Gamers can also install the CPU cooler up to 154 mm for your system.
  • Tremendous Expansion: Supporting up to 154 mm CPU Cooler, up to 380 mm Graphics Card and multiple PCI-E Slot (7) provides gamers more flexibility to upgrade their system for speedy and exciting practice..
Check Stock

Wathai Pcl Slot Fan 90mm 92mm Fans Brushless Cooling Fan for VGA Graphic Card Cooler

  • Totally Size: 276mm(L) x 120mm(W) x 30mm(H) / 10.86in(L) x 4.72in(W) x 1.18in(H).
  • Packing: 3x90mm graphics card fan with 1*Power D-type Interface cable.
  • please check the size to make sure your pc has enough space.Designed for most universal graphic card video card VGA computer PC Case cooling.
  • Universal GPU Cooler, Fit for most of the market graphic card video card VGA computer PC Case cooling..
  • D-type interface cable included four interfaces, three voltages: 5V 7V and 12V.
  • Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan..
  • Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be refunded within 90 days and replaced within one year..
Check Stock