ReviewsComputer Control Servo Motor

diymore 6Sets MG996R 55g Digital Metal Gear Servo Motor + MG995 MG996R Metal Servo Arm 25T Disc Metal Horns for Robot Arm RC Helicopter Airplane Car Boat Robot

【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
Operating Speed : 0.17sec / 60 degrees (4.8V no load).
Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..

Check Stock

LEGO Technic 42030 Remote Controlled Volvo L350F Wheel Load

Remote-control replica of the powerful Volvo L350F wheel loader. 2-in-1 model: rebuilds into a Volvo A25F articulated hauler.
Features a detailed 6-cylinder Volvo-green engine with moving pistons and fan, articulated servo steering, working lift arm, and a tipping bucket.
Activate the double remote-controlled Power Functions motors for powerful, simultaneous driving and digging action - just like the real machine!.
Includes LEGO Power Functions components: servo motor, XL-motor, large motor, medium motor, battery box, 2 remote controls and 2 infrared receivers.
Volvo L350F (with bucket lowered) measures over 9" high, 22" long and 6" wide. Volvo A25F measures over 9" high, 19" long and 6" wide.

Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.

Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

[CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
[9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
[4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
[SERVO TESTER] Includes 3 modes to test servo motors or ESC.
[GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.

Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....

Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.

Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..

Check Stock

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

Micro Servo Motor for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots . Created from the Highest Quality Parts Available and Put Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..

Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
Stable and shock proof, metal gear, connector wire length 300mm..
Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..

Check Stock

VATOS Spirit Brushless 52km/h High Speed RC Cars 1:16 Remote Control Monster Truck 4WD All Terrain Off-Road 2.4Ghz Shockproof Waterproof RTR Hobby Cars for Intermediate Hobbyist (1：16)

...BRUSHLESS MOTOR & HIGH SPEED 】: RC2485 3200kv professional brushless motor, 23600 rev per minute at 7.2v, making the speed up to 52km/h, compared with the brushed motor, the brushless motor has 2-3 times life span, 1/3 energy consumption and lower noise.
【INTELLIGENT ESC PROCTECTION】: The 35A electronic speed controllers (ESC) receiver has a variety of intelligent protection functions,Including over-current protection and battery low-voltage cut-off protection functions，IPX4 waterproof level provides all-round and angle splash water protection, can be splashed water from different angles, but don't submerge it underwater.
【DURABLE BODY STRUCTURE】: Anti-corrosion, high strength, anti-impact PA material chassis and Reinforced Body Frame make the RC car not east to break. Aluminum alloy damping springs, widened suspension system and vacuum rubber tires, all-terrain adaptation, whether on rugged slopes or rough mountain roads are as usual.
【UPGRADE DIGITAL SERVE】: 3-wire digital Servo, 1.8kg pull force, 300 pulses per second, compared with analog servo, digital servo provides higher accuracy and better fixed power, faster response, Softer and faster acceleration and deceleration. Digital servo provides higher precision and better fixed power....

Check Stock

Next Wave PRO RS1000 two Axis CNC Router Table setup for Dovetail, Box Joint, Rabbet, Dado, Lock Miter

The SHARK RS1000 PRO allows you to type in any desired measurement, press OK, and it will accurately move to that exact dimension, even if it is only one-thousandth of an inch, no more bumping or nudging needed!.
Toggles between input inches as fractions, decimals, or metric measurements so you don’t have to convert dimensions.
Fence and lift move accurately in direct relationship to the bit with movement as little as .001”.
WHAT IS INCLUDED: 3-1/2 inch travel CNC Servo Motor driven Router Lift, Fence with Feather Boards, , Control Pendent and software, CNC Servo Motor driven Fence, Includes template for cutting Hole in your home made Table top..
WHAT IS NOT INCLUDED: PRO Sliding Miter, Router Table Top or stand, Router motor(You will need to provide a router Motor with a 3-1/2 inch diameter Motor can, Bits,.

Check Stock