ReviewsComputer Heatsink

Scythe Kaze Flex Slim 120mm RGB LED Fan PWM 300-1800RPM No Controller Included Single Pack

• Slim design only 15mm thickness(17mm with Anit-Vibration Rubber), this thin fan is ideal for SFF computer(HTPC, Mini-ITX case) or low profile CPU....
• Newly designed blade and frame contribute high airflow with low noise, ideally for computer case, radiator/heatsink and CPU cooler. PWM control offers....
• Using Sealed Precision FDB for long life span and quiet operation.Included antivibration rubber pads covering each corner of frame. These decouplers....
• 8 high quality LEDs built into central hub, the lighting is bright and even reflected with milky-white blade. The 4-pin 12V RGB connector allows fan....
• Connector: 4-Pin, Dimension: 120x120x15mm(17mm with Anit-Vibration Rubber), Fan speed: 300±200~1800±10% RPM, Airflow: 8.28~50.79CFM, Noise:....

Arctic F8 PWM 8cm 4pin 850-2000 RPM Computer Case Cooling Fan Quiet CPU Power Cooler Cooling Chassis Fan Arctic Case Fan

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

• ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
• ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
• ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
• ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
• ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.

Scythe Kaze Flex 140mm Fan, PWM 300-1800RPM, Quiet Case/Radiator Fan, Single Pack

• 140mm PC fan with standard mounting space, the fan is ideal for computer case ventilation and water cooling radiator..
• Sealed Precision Fluid Dynamic Bearing: the bearing and the spindle are made of high quality compressed metal and are lubricated by a special oil film resistant to temperatures of up to 250C° / 480F°. This drastically reduces friction, ensuring smooth operation and reduced wear, which results in long life span and silent operation..
• Included antivibration rubber pads covering each corner of frame. These decouplers effectively reduce possible vibrations and allow silent operation..
• Newly designed blade and frame contribute high airflow with low noise, ideal thermal fan for computer case and CPU cooler/heatsink. PWM control offers wide range fan speed for various application and system..
• Connector: 4-Pin, Dimension: 140x140x25mm, Fan speed: 300±200~1800±10% RPM, Airflow: 16.8~100.8CFM, Noise: 4.19~26.45dBA, Static Pressure: 0.08~2.81mmH2O, MTTF: 120,000hrs.

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

• DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
• REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
• UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
• INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
• CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

• DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
• REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
• UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
• INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
• CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..

GLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD

• M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
• Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
• Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
• 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
• A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....

EKWB EK-M.2 NVMe Heatsink- Black

• Materials used: – Aluminium front cover – Aluminium backplate – Stainless steel clips.
• Enclosed: – EK-M.2 NVMe Heatsink front cover – black – EK-M.2 NVMe Heatsink backplate – black – Mounting clips – Thermal pad 0.5mm – Thermal pad 1mm – Thermal pads.
• PLEASE NOTE: The heatsink is compatible with all single sided type 2280 M.2 NVMe SSDs (22mm wide, 80mm long). The heatsink is compatible with M.2 (NGFF) connectors 4.2mm heigh.
• PLEASE NOTE: Its mandatory to mount thermal pads on both sides of the M.2 NVMe SSD. The ASUS HYPER M.2 PCIe card just for showcase it is not included!.

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

• ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
• User manual, refer to Geekworm WiKi search C235..
• ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
• ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
• ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
• ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

• The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
• It can not work for Raspberry pi zero, because there is no pin header on zero.
• Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
• You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
• This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..

Argon NEO Raspberry Pi 4 Case | All Aluminum

• Argon NEO is a thoughtfully designed aluminum Raspberry Pi 4 case enclosure for the Raspberry Pi 4 with removable magnetic cover.
• Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
• Keeps RPI 4 cooler with the aluminum metal case acting as heatsink. Keep it even cooler with Raspberry Pi accessories like Argon Fan Hat..
• Easy access to ports connects power cable, external HDD or SSD, display screen and other official RPI and GPIO accessories..
• Works best with Raspberry OS, Kodi, LibreElec, Ubuntu, Retropie, and other Debian based OS.