ReviewsConcret Fitting

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..

Check Stock

Toolazy Ebb & Flow Fitting Kit，Ebb and Flow Fitting Complete Kit Combo Set with 2 Extensions

HIGH QUALITY PLASTIC ： Each kit is made from 100% black virgin plastic and is BPA free。.
TIDAL IRRIGATION SYSTEM ： Can be used for hydroponics, Tidal irrigation, Aeroponic, aquaponics, flood and drain and drip irrigation systems。.
PACKAG KIT ： Ebb & Flow Kit Fill & Drain Fitting comes sealed in a bag，1/2" Tub outlet fitting(1 piece), 3/4" Tub outlet fitting(1 piece), Screen fitting(2 piece) and outlet extension fitting(3 piece)。.
EXCELLENT QUALITY ： Filling/draining kits made with the highest quality materials and craftsmanship, strict quality control to ensure tight fit。.
INCREASED VERSATILITY ： Thread PVC pipe fittings into bulkhead fittings，Used in homemade tidal irrigation systems。.

Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....

Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....

Check Stock

Hayward SP1023 1-1/2-Inch FIP Inlet Return Fitting with Locknut and Gasket

Inlet return fitting comes with gasket and locknut.
It is designed to fit on-ground and above ground swimming pools.
Gaskets and a fitting nut allow it be attached and sealed thru the pool wall and vinyl liner.
Front has 1-1/2-inch female threads for use with the eyeball fitting.
Back has 1-1/2-inch female threads for use with a hose fitting.

Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').

Check Stock

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..

Check Stock

Swpeet 246Pcs SAE & Metric Grease Nipple Assortment Kit, Hydraulic Grease Fittings Standard with Plastic Grease Fitting Cap – 1/4\

❤ 1, Package Included --------- In this kit,You will get 1/4"-28 straight: 20Pcs.
1/8"-27 straight: 20Pcs. Red M6 grease fitting caps: 15Pcs.
Blue M8 grease fitting caps:15Pcs.Black M10 grease fitting caps: 15Pcs.M6 × 45°: 10Pcs.
❤ 2, High quality ---------- These zerk fittings are made of high-strength zinc-plated steel. The galvanized steel is more durable and has better rust-resistance even under extreme environments..
❤ 3, With Plastic Grease Fitting Caps -------- Assorted grease fitting caps to resist dust, Have 2 Colors 2 Sizes grease fitting caps - M6 and M10. Made of High quality plastic for perfect fit, easy to use, Can be used for a long time. Keeps Bleeder Screws Free From Dirt And Moisture, You will Love the color coding and the price. More of a plasticky type of cover..
❤ 4, Grease Zerk Fitting ---- High Quality SAE Grease Nipple Fittings Kit Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too. Allows you to simply insert lubrica....

Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..

Check Stock