ReviewsConcrete Block Machine

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • ...ed design, built-in noise reduction, external sound insulation.
  • after the nail is fired, the sound comes out of the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
  • 4 block is suitable for wooden soft base..
Check Stock

MAGBIT 625.4816 MAG625 3-INCH CARBIDE GRIT HOLESAW WITH 1-1/2 INCH DEPTH

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

Red Devil 0646 Masonry and Concrete Acrylic Sealant, Pack of 1, Gray

  • TEXTURED LIKE CONCRETE: Blends easily with concrete and mortar.
  • SEALS CRACKS & JOINTS: Works on concrete, masonry, stone, cinder block and brick.
  • WON’T STAIN OR BLEED: Mimics the look of concrete or mortar.
  • EXCELLENT ADHESION: Provides a long lasting repair.
  • WATER CLEAN UP: Cleans up easily with soap and water.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

MAGBIT 625.3216 MAG625 2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth White

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.1816 MAG625 1-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.3816 MAG625 2-3/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

CONFAST 3/8 x 6 Flat Sleeve Anchor Zinc Plated 25 per Box

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block.
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials.
  • PRE-ASSEMBLED - Ready to install no separate parts required.
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs.
Check Stock