ReviewsConcrete Block Machinery

MAGBIT 625.4816 MAG625 3-INCH CARBIDE GRIT HOLESAW WITH 1-1/2 INCH DEPTH

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

4-1/2\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\-5/8\ Arbor

  • MULTIPURPOSE - 4.5" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

Conquest 3/4 x 7 Type 304 Stainless Steel Wedge Anchors Box of 10 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/4" | Length: 7" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 10 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Conquest 5/8 x 6 Type 304 Stainless Steel Wedge Anchors Box of 25 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 5/8" | Length: 6" | Thread Type: Coarse (standard) | Thread Length: 4" | Quantity: 25 Pieces | Material: 18-8 (Type 304) Stainless Steel.
  • [CORROSION RESISTANT] 100% 18-8 (Type 304) Stainless Steel provides the highest form of corrosion resistance. Ideal for outdoor or non-chloride environments.
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

Red Devil 0646 Masonry and Concrete Acrylic Sealant, Pack of 1, Gray

  • TEXTURED LIKE CONCRETE: Blends easily with concrete and mortar.
  • SEALS CRACKS & JOINTS: Works on concrete, masonry, stone, cinder block and brick.
  • WON’T STAIN OR BLEED: Mimics the look of concrete or mortar.
  • EXCELLENT ADHESION: Provides a long lasting repair.
  • WATER CLEAN UP: Cleans up easily with soap and water.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

MAGBIT 625.3216 MAG625 2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

Conquest 3/8 x 3-3/4 Type 316 Stainless Steel Wedge Anchors Box of 50 Heavy Duty Fastener for Concrete

  • [DIMENSIONS] Diameter: 3/8" | Length: 3-3/4" | Thread Type: Coarse (standard) | Thread Length: 2-7/16" | Quantity: 50 Pieces | Material: Type 316 Stainless Steel.
  • [CORROSION RESISTANT] Highest grade 100% 316 Stainless Steel provides highest form of corrosion resistance. Ideal for any environment (including marine and saltwater applications).
  • [APPLICATION] Conquest wedge anchors are high quality concrete anchors designed for use in uncracked concrete. These hardened steel anchors are commonly used for installing racking, machinery, car lifts and other fixtures.
  • [DESIGN] Chamfered top designed to prevent mushrooming during installation.
  • [INSTALLATION] Hole size is nominal diameter of anchor size.
Check Stock

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth White

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.1816 MAG625 1-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock

MAGBIT 625.3816 MAG625 2-3/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

  • Works in rotary and SDS hammer mode, works forward and reverse.
  • Drilling a hole through concrete block takes less than 7 seconds.
  • Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster.
Check Stock